Yes, the ASK300 will print two 2x6 strips. Check out this support article for more info support.darkroomsoftware.com/portal/en/kb/articles/how-do-i-set-the-2x6-vs-4x6-cut-on-my-printer If you need further assistance please contact our support team by emailing support@darkroomsoftware.com and one of our support specialists can help you out.
Informative video, thank you! Is there a way to see how many prints are left on a roll? I have this printer and can’t seem to figure it out. Thank you!
You can find how many prints remain by going into printer preferences. See this ASK-300 documentation for more information:asset.fujifilm.com/www/ca/files/2020-02/68aaefe9dc93e0eb70d5a1aaaf7b4660/ASK-300_Printer_Driver_Software_for_Windows.pdf
I have a problem with the fujifilm ask 300, or my new laptop. When I let the photo print, it only starts to print after 50 seconds. I took a new USB cable, but everything is still the same. Do you know what could be the problem?
It's hard to say without some troubleshooting. It most likely has something to do with your computer and/or the Fuji driver. Please contact our support team and they can help you troubleshoot - email support@darkroomsoftware.com
Question.. Just bought darkroom and fuji ask300 for my photo booth. I print ask default setting but it to dark when it print the result. What is the best printer setting at the darkroom and fujiask300? thank you
Hello - please contact our support team and they can help you with that. Email support@darkroomsoftware.com or call 214-390-3258 or visit our support site: www.darkroomsupport.com
Hello - Darkroom Core and Pro software is for Windows computers only. If you have any other questions please contact our support team by emailing support@darkroomsoftware.com
A line in the middle of the print is usually due to dust or matter on the print head. Refer to the printer manufacturer's recommendations on how best to clean the print head.
@@DarkroomSoftware اخي شكرا على الرد كل الاحترام والتقدير لك اخي اتصلت بالشركة وقالولي الثمن صيانه غالي جدا تقريبا نصف ثمن شرائها ولم استطع هل هناك فيديو للتنظيف رأس الطابعة وشكرا
Hi ... I have Fujifilm ask 300 it's good but i have problem with the colors there are too darened specialy on the face, plz tell me what's the problem !!?
Your best bet is to check in with Fuji: www.fujifilm.com/us/en/business/photofinishing/photo-printer/ask300/support But feel free to email your request to our support team - support@darkroomsoftware.com
With any printer, it is always best to use the latest printer profile from the manufacturer rather than making any color adjustments in the printer driver.
Can you set this up to print 6x2x2 strips?
Yes, the ASK300 will print two 2x6 strips. Check out this support article for more info support.darkroomsoftware.com/portal/en/kb/articles/how-do-i-set-the-2x6-vs-4x6-cut-on-my-printer
If you need further assistance please contact our support team by emailing support@darkroomsoftware.com and one of our support specialists can help you out.
Informative video, thank you! Is there a way to see how many prints are left on a roll? I have this printer and can’t seem to figure it out.
Thank you!
You can find how many prints remain by going into printer preferences. See this ASK-300 documentation for more information:asset.fujifilm.com/www/ca/files/2020-02/68aaefe9dc93e0eb70d5a1aaaf7b4660/ASK-300_Printer_Driver_Software_for_Windows.pdf
I have a problem with the fujifilm ask 300, or my new laptop. When I let the photo print, it only starts to print after 50 seconds. I took a new USB cable, but everything is still the same. Do you know what could be the problem?
It's hard to say without some troubleshooting. It most likely has something to do with your computer and/or the Fuji driver. Please contact our support team and they can help you troubleshoot - email support@darkroomsoftware.com
Question.. Just bought darkroom and fuji ask300 for my photo booth. I print ask default setting but it to dark when it print the result. What is the best printer setting at the darkroom and fujiask300? thank you
Hello - please contact our support team and they can help you with that. Email support@darkroomsoftware.com or call 214-390-3258 or visit our support site: www.darkroomsupport.com
i need to install in macbook pro M1 pro with Ventura, can you help me?
Hello - Darkroom Core and Pro software is for Windows computers only. If you have any other questions please contact our support team by emailing support@darkroomsoftware.com
سلام عليكم
أواجه مشكلة عند اطباعة وهي خط رقيق وسط الصورة وهءا يجعل الصورة مشوهة هل هناك حل لو سمحت
A line in the middle of the print is usually due to dust or matter on the print head. Refer to the printer manufacturer's recommendations on how best to clean the print head.
@@DarkroomSoftware اخي شكرا على الرد كل الاحترام والتقدير لك اخي اتصلت بالشركة وقالولي الثمن صيانه غالي جدا تقريبا نصف ثمن شرائها ولم استطع
هل هناك فيديو للتنظيف رأس الطابعة وشكرا
إذا قمت بالبحث في UA-cam ، فستجد العديد من مقاطع الفيديو المفيدة. هنا رابط لواحد ua-cam.com/video/HlB4L9xeRtI/v-deo.html
@@DarkroomSoftware شكرا الله يرصى عليك
Hi ... I have Fujifilm ask 300 it's good but i have problem with the colors there are too darened specialy on the face, plz tell me what's the problem !!?
Your best bet is to check in with Fuji:
www.fujifilm.com/us/en/business/photofinishing/photo-printer/ask300/support
But feel free to email your request to our support team - support@darkroomsoftware.com
ماذا افعل لقد اضاء لي ضوء الورق والحبر ما الحل
I don't understand your question. Please contact support by emailing support@darkroomsoftware.com
What is the color setting on this one?
With any printer, it is always best to use the latest printer profile from the manufacturer rather than making any color adjustments in the printer driver.
Can we make this printer wireless?
You can send images wirelessly from the right camera set up with wifi but you would still need a computer interfacing with the Fuji ASK300.
I have ink ribbon end error. I have used celotape, anyone know a fix for this?
Please contact Fuji or the dealer from whom you purchased the printer.
Sou brasileiro muito obrigado só você realmente conseguiu me ajudar merecia 1 milhão de likes
I am happy we could help!