I just wanted to add a comment because it took me a week of calling Salus to find the solution. If you have multiple Wiring Centres and they keep defaulting to the same channel (1) and therefore interfering with each other, there is a solution. You need to press and hold pair for 12 seconds. Then wait 20 seconds, then start scanning for new equipment in the app, then whilst it is scanning, press the reset button on the wiring centre. It's fiddly and took me a few goes but did work!
Super good videos - thanks. You let it look very easy, I have been struggling with several beginner issues. But you videos helped. My biggies issue left, is the extension from 8 to 12 zones. It simply will not connect together. Do you have a video that shows what to be aware off. I chose to make the setup with WiFi and Bridge, but the new app premium lite is almost killing me. It keeps forgetting the bridge and needs to be searched for each time I start the app. Have you tested the new version. ? Thanks again.
Hi Allen. Thank you for a fantastic video. I did have issues with getting the IT600 online. Gateway is solid blue and I had success in setting the thermostates up in offline mode. The reasoning is that the It600 stayed ‘offline’ despite removing the USB stick, so has todo it the old fashion way. So it works.That being said, thermostates are paired, everything works, but I never managed to get the thermostates and It600 to show green in the app. How do I manage that? Currently I can’t manage it all in the app, only the UGE600 as the IT600 stays offline. Thanks in advance!
#SalusSmartHome #SmartHome #Salus ua-cam.com/play/PLTjtaS435JQ97o53OiPcSqL4PLxQdnAiu.html
I just wanted to add a comment because it took me a week of calling Salus to find the solution. If you have multiple Wiring Centres and they keep defaulting to the same channel (1) and therefore interfering with each other, there is a solution. You need to press and hold pair for 12 seconds. Then wait 20 seconds, then start scanning for new equipment in the app, then whilst it is scanning, press the reset button on the wiring centre. It's fiddly and took me a few goes but did work!
ua-cam.com/video/OhKlOiXA3I0/v-deo.html
Super good videos - thanks. You let it look very easy, I have been struggling with several beginner issues. But you videos helped. My biggies issue left, is the extension from 8 to 12 zones. It simply will not connect together. Do you have a video that shows what to be aware off. I chose to make the setup with WiFi and Bridge, but the new app premium lite is almost killing me. It keeps forgetting the bridge and needs to be searched for each time I start the app. Have you tested the new version. ? Thanks again.
Hi Allen. Thank you for a fantastic video. I did have issues with getting the IT600 online. Gateway is solid blue and I had success in setting the thermostates up in offline mode. The reasoning is that the It600 stayed ‘offline’ despite removing the USB stick, so has todo it the old fashion way. So it works.That being said, thermostates are paired, everything works, but I never managed to get the thermostates and It600 to show green in the app. How do I manage that? Currently I can’t manage it all in the app, only the UGE600 as the IT600 stays offline. Thanks in advance!