How To Clean a Guitar Fretboard by Kiesel Guitars
Вставка
- Опубліковано 2 жов 2024
- One of the most frequently asked questions we get at the custom shop is "How do I clean my maple (or tung oiled) fretboard?" In this video our VP Jeff Kiesel breaks it down and shows you all the necessary steps to get your dirty fretboard nice and clean again!
For more info call our experts at the custom shop at (858) GUITARS, or visit our website: www.KieselGuita...
Be sure to follow us:
/ kieselguitars
/ officialjeffkiesel
/ kieselcarvinguitars
/ jeffkiesel
A video of basic instrument care or a compilation of videos, like this one, that gives you necessary information of proper handling and care to keep your Kiesel like new. Also, mentioning if there are different methods or techniques for different woods or finishes. Also, what NOT to do. Tutorials from Jeff Kiesel himself. :) I think that would be awesome. Great video.
wanna see how you intonate a fr-tremolo
+nhjhn agreed!
same way you do a tuneomatic,tune guitar to 4-40,check string pitch open,12th fret,12th fret harmonic
and make them match by adjusting saddles accordingly.
nhjhn “Therefore I will judge you, O house of Israel, every one according to his ways, saith the Lord GOD. Repent, and turn yourselves from all your transgressions; so iniquity shall not be your ruin.” Ezekiel 18:30
Romans 10:9 "That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.”
Buy “the key” tool.. i intonate my Floyd in 10 min... ridiculously easy
It's way easier with the FR Hollow Point Intonation System, no key needed...
I don't even own a guitar with a maple fretboard, but it's pleasing to look at the cleaning process.
Sonia Anubis Jesus Is the way, the truth and the life. Religion NEVER saved anybody. It's nothing but traps and Satan twist things to keep you deceived! He gives you the WORLD only to lose you're soul! "What does it profit a man to gain the world and lose his soul? Jesus there's true freedom and peace! He wants to free you from those chains! If you desire He says "come" there is a scripture that Jesus says saying if anyone is thristy or hungry, come drink and eat without cost 💕 When your sick of religion and seeking and never grasping what you desire. When your tired and heavy laden and afraid, etc. Wen you just can't do it anymore. Seek the true GOD. I promise you when you truly seek and want to know God you'll find Him. He says so. If you seek God wholeheartedly you will FIND Him! He will reveal Himself to those that seek Him! If you have never known Jesus - repent and believe the gospel. Jesus loves you. He isn't religion. He doesn't want your worldly possessions or money. All these things don't belong to you but God. He wants you. He died on that cross for our sins. He loves you. You were bought with a price! Jesus Christ died for our sins. A debt we could NEVER have paid. He reconciled us back to God. And invites ALL to come. Take the free gift of salavtion. "Come to me, all Ye that labor and are heavy laden, and I will give you rest." 💕 Rev 22:17 "And the spirit and the bride say, Come. And let him that heareth say, Come. And let him that is athirst come. And whosoever will, let him take the water of life freely." 💕 Isaiah 55:1 "Ho, every one that thirsteth, come ye to the waters, and he that hath no money, come ye, buy, and eat; yea, come, buy wine and milk without money and without price." 💕 John 4:14 "But whosoever drinketh of the water that I shall give him shall never thrist; but the water that I shall give him shall be in him a well of water springing up into everlasting life." 💕 John 6:35 "And Jesus said unto them, I am the bread of life: he that cometh to me shall never hunger; and he that believeth on me shall never thrist." 💕 John 7:38 "He that beliveth on me, as the scripture hath said, our of his belly shall flow rivers of living water." 💕 have everything yet are empty? All those possessions, fame, etc! Yet still lacking contentment? Seeking.. still longing.. still thirsting? Never will fill that God given spiritual craving or thirst without Him.
John 7:37-38 "In the last day, that great day of the feast, Jesus stood and cried, saying. If any man thirst, let him come into me and drink. He that beliveth on me, as the scripture hath said, out of his belly shall flow rivers of living water."💕
He is the well! The source of the soul satisfying water of life - this is for all to read. Jesus is coming back soon! Repent and turn back to God. Repent and believe the gospel! Be born again! Unless you become born again of the spirit you will NEVER enter the kingdom of heaven. Jesus sets man free. Get a KJV bible. May the Lord be with those that seek Him 💕 hell is eternal and so is HEAVEN 💕
Hebrews 9:27 "And as it is appointed unto men once to die, but after this the judgment."
John 8:24 "I said therefore unto you, that you shall die in your sins: for if you believe not that I am he, you shall die in your sins."
Romans 6:23 " For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord."
John 14:6 "Jesus said unto him, I am the way, the truth, and the life: no man comes unto the Father, but by me."
1 John 14:9 "We love him, because he first loved us." Jesus is LOVE 💕 God is LOVE!
God bless you in Jesus name 💕
...
@@jesussaves744 What are you talking about..?
I don't own a pc but is pleasing to read your comment from the library.
Anubis acetylcholine
How about a 'How to Care for Your Nut' episode?
How about a care for your "Nuts" video?😄😄😄😄
🤣🤣
regular "change oil" - Asian
The best thing I've ever heard the shmoo buildup on the fretboard being called is 'finger-ass'. Haha still makes me laugh.
+EulogyAdd LOL
Very useful video! Jeff, thank you so much!!! Now I will definitely use this method! ;)
On a similar note, how about cleaning and care of a tung-oiled body/neck. Or, how you guys apply, and treat the tung-oiled guitars.
hahaha my old guitar! so sorry for the mess jeff hahaha at least I finally know how to do this ;)
Actually washing your hands before you play is the easiest thing you can do. Nice video. Also you can get a strong magnet and wrap it in your steel wool before using.
good idea, does it work well?
I would stay away from using a magnet. I've heard stories of the extra magnetic field weakening pickups over time. I stay away from steel wool all together because it is abrasive, even at such a light gauge. Check out Gorgomyte cloth. It's completely non abrasive and conditions the wood as well.
Those gorgomyte cloths are great when you're working on a really dirty guitar. Also not bad maybe once every few years. Not a fan of the steelwool, I prefer the fretwire erasers and finish with a wheel on a proxxon rotary tool (a dreml is sooo much louder...day/night difference) for the final buffing.
I use this cleaning method as well. But I do not use compressed air at first . I first use a feather paint brush that is super soft to remove metal steel wool pieces from the guitar. Then I vacuum them up as much as possible so they do not scatter around the house or shop. Then I blow out the rest. On bolt on necks. I take them off the body removing all possibilities of the metal sticking to the pickups. I do love that guitar though.
that guitar beautiful dude!
Thanks You !!!!!!!....
That white Carvin is a real beauty! What model?
Somebody already asked, but it's a DC600.
I have a Charvel San Dimas (maple fretboard) that needs cleaning. How do I know if the wood is treated or untreated ?
I've googled it a few time but still haven't come to much of a conclusion
Would be great to see videos on how to PROPERLY Intonate a floating bridge like the Floyd Rose Tremolo System coming from a professional like yourself Jeff. Also how to PROPERLY TUNE a Guitar with Floyd Rose Tremolo bridge. It has always been really confusing for me. A tried and true method would be nice. Some people say to tune string in different ways and in different order. I could never get it right... specially the damn G string jjajajajajajaja
It's way easier with the FR Hollow Point Intonation System...
It isn't clean though?
Can you do the same with the back of the neck if it is also finished with oil?
finally something i can do to help keep that lighter color of my maple fretboards! will the tung oil darken colored inlays much?
Is it an unfinished maple, or does it have a thin finsih on it?
I would try to investigate the proper procedure for your brand first before doing this. Then study just how your neck was built and what finish it has. Then determine how finishes react to each procedure and what is used. You could also use a damp cotton cloth on your maple fretboard like I do to clean it up. Yes I said damp but very very little about as much as your hand would sweat playing it or less!
Good video. How about a video on how to make truss rod adjustments? Also, talk about the flip side of that topic, which is how NOT to jack up your neck by adjusting the truss rod the wrong way. Thanks for these videos.
Well Jeff, you're the expert, but I have to disagree with the use of steel wool on this. That being said, I absolutely love the tung oil idea. I'm definitely going to give that a try, so thanks for the great video.
Nice! Would love to see a set up video. Neck relief, action, all that. Yeah, there are lots, but Kiesel Setups look great and consistent.
Any special tips for roasted maple?
Will you do a step-by-step video series on how to build a guitar? I've been doing some research for over a year while I save up for the rest of the tools I'll need; but most tutorials and guides I've found are either just bits and pieces of the process or the end product doesn't appear to be high quality. I realize I'm not going to make outstanding instruments right off the bat. However I do feel I would stand a much better chance watching and learning from a master guitarsmith such as yourself. Any tips or tricks would be greatly appreciated.
My Kiesel is the best guitar I’ve ever owned. The most stable neck, best action and amazing awesome tone. I will get another! Love seeing videos like this.
Get a Suhr. It will change your life. :)
Sweet thanks Jeff. Is this method ok for Roasted? I was wondering since Im playing mine 5 hours a day. My A2 has a screaming flame maple fretboard. What no gloves? I know how you feel about germs!
How about a video about "how to wire up our passive/active module." I might attempt to install on my Jason Becker "numbers" guitar. I know it would void my warranty but I don't care.
Silly question but I can't tell, is this a DC model, or Aires model?
It's a DC600
Do a video for setting up a Floyd Rose for intonation, and string height. Those 2 things crippled me when I was new to guitar and UA-cam didn't exist. lol
EXCELLENT JEFF ! 👍 👍
would I be able to this to a roasted maple fretboard?
Yes, tung oil optional but less essential compared to plain maple
Does this work for a Strat neck that is treated? (gloss)
Go over all the finish options. Great video. Thanks.
Dig the whole video, but especially the GREAT OUTRO MUSIC!!! -Jeff please tell us, - what artist and track? Thanks! 🎸🎵🎶🎵🎶🎶
Great video! Beautiful guitar. How about setting up Floyd Rose and/or Wilkson tremolos.
How you set up the guitar if it has fretbuzz in particular frets.
Please consider doing a video tour of your factory and building process video. Thank you so much!
Cheers from Portugal.
as kiesel guitar seem to have some of the best/cleanest finishes I've seen, I'm interested in what you use to finish, how exactly you finish sand and buff and all the products that are used...especially the trans white
Could you do a video on how to clean a roasted maple fretbord?
Jeff get ahold of us when you figure something out.
The next vid should be on neck maintenance for the tung oiled backsides. Or if it is the same as the board.
Go over all the finish options.
Just got my first kiesel with Birdseye maple board and this was so informative on how to properly clean and polish the neck and frets. Thanks Jeff!
can I come down to make a video with my lb 76 and I think the j9 pickups with a 9 volt pre amp all maple boss bad ass bass guitar or my bb76 second bad ass bass guitar I'll be your friend or a video with a bass that has the h50 pickups
Is that white/white or pearl white? And the ablone dots look gold depending on light.
it's Diamond Pearl White
Can you please post a video on how to put a maple top veneer on an electric guitar? (DIY) for us who don’t have a vacuum machine.
Thank you so much!🤘🏻🤘🏻
that doesn't scratch up the inlays?
+Jeff Jones 0000 steel wool is not super abrasive, so as long as you don't dig in too hard you should be ok!
+Kiesel Guitars Thanks! Keep up the KILLER builds!
For all of you saying "Don't use steel wool! "It'll scratch and leave marks on the wood". You are incorrect. Not if you are using 0000 steel wool. In furniture refinishing, we use a more coarse steel wool for stripping paint, lacquer or other wood finishes. Like a number 2 or 3. Then we move up to finer grades while cleaning and prepping the surface to be refinished. We end up with a 0000 grade to actually polish the piece to take out any scratches or swirl marks. If you use light pressure and a vigorous back and forth, you will NOT scratch your fretboard or your frets even going against the grain. I don't use Tung Oil on my fretboard though. I use something called guitar honey on my Rosewood fretboard afterward and it looks great when I'm finished. Trust me. Try using the 0000 steel wool and you'll see how easy it is to clean a dirty fretboard and give your frets a nice polished, smooth shine.
does that guitar belong to dan sugarman?
+skycaptain141 yessss she did, no longer though ;)
Anyone know where to get elbow grease…I’ve looked everywhere 🫤
How about on a Maple Kiesel Treated board? So scared to try anything on it :)
+Ty Jacobs we're working on a video for those.. stay tuned!
+Kiesel Guitars Excellent, I've got a Kieseled FM board in the CT run! It's gonna look so good, I'm gonna need to keep it clean lol!
On a finished maple board you can clean with naptha if very dirty other than that a microfiber cloth and just dampen it in water
Thanks for this video. I've always been fond of linseed oil on a rosewood fingerboard. Thoughts on that?
I read that they boil linseed oil before applying.
Really surprised by several aspects of your cleaning if you don't mind...just MY opinion mind you.
As a woodworker I would NEVER abraid ACROSS the grain...big no-no in most woodworking. Also Maple is NOT open grained like Ebony or Rosewood so Maple fret-boards are usually sealed....so sanding or wire-wooling will remove this protection.
For my guitar I ONLY use 4-0 wire wool and ALWAYS with the grain...never across...but then again mine is Rosewood.
Maybe you're right...you've done it a long time but it's not for me.
Cheers from Canada North
So helpful. Thanks a billion.
what would be the difference between this and cleaning an ebony fretboard? thanks
+Lucas Batistuta no difference! You can clean any type of board we offer except color treated boards like this
Good..
But why Kiesel Guitars price are so higher than Other guitar 😃
Do you think it is safe to use this on my PRO-MOD SAN DIMAS® STYLE 1 HH FR, MAPLE FINGERBOARD please ? And the back of the neck ? Thanks
I usually wipe off the boogers with a very slightly moist towel 1st, and then a dry towel and linseed oil after. That usually does it. Steel wool on frets if needed. The wool works good to smooth out a rough non lacquered fretboard. I also recommend using a fretboard protector while polishing frets by hand, especially on a lacquered fretboard (they are couple bucks on eBay) Easier than taping the fretboard and neck.
Love my DC727!
Great video! Can I apply oil lemon on a tung oiled coloured fingerboard?! Plz
I have a slightly different approach, as all my maple-board bass guitars are high-gloss urethane (or poly) finishes.. I use the painter's tape to mask off the wood between the frets, and clean the frets with Scotchbrite and follow that with a good metal polish (in my case, AutoSol SOLVOL). I then use a car polish (Meguire's) to clean the maple fretboard, (I will use a soft toothbrush to get the smegma up against the frets) and follow it up with an automotive cream paste wax (again, Meguire's). YMMV, one man's opinion, just my .02 etc, etc.
following the same process could you do a darker colour of varnish before or after the oil? is that possible and would that damage the fretboard or not?
Please do a Carvin DC or ST series neck truss rod and/or shimming what needs to be done to lower String high action at the upper frets...action normal at feet 1-12 but then string action is higher
Any videos to help us customize and take care of our guitars will be VERY APPRECIATED! Tutorials from others help but I'm most comfortable working on my Carvin (yeah I'm old school) using videos from you guys!
How do y'all do your hard as nails fretless ebony fingerboard treatment?
before I watched this video I used baby wipes to clean up my fretboard, immediately afterwards I realized the humidity could fuck it up. should I be worried or am I good?
Do you still have that guitar model available?
The Aries AM8 needs more content on UA-cam. I guess the 7 string is more popular. I'd like to buy the Aries AM8, but with such a big purchase I'd like to see videos more about it.
Offtopic, I am new to maple I own a lakland bass guitar and they told me not to use steel whool or tung oil , it’s a mate maple fingerboard, if I want to get rid of the stains they told me that I have to sand it than use superglue CA to seal the pores, what do you guys say? Thanks!
What’s the horn?
Fantastic video! I just attempted to clean a a maple fretboard on one of my guitars the other day. You guys were a tad late with this video! :P Something I've always had issues with is getting dust and such off of my tremolo. If you guys know of a way to do that, I'd love to see a video on it. :)
+Battle Toad I dust off guitars with the kind of brushes used for cleaning camera lenses, or the ones used by barbers for shaving.
I have been using a makeup brush but it doesn't do a great job. Suppose I could look into other kinds of brushes. :P
If you need something a little stronger, use an soft tooth brush. The fibres are stil soft enough to avoid scratches, but since they are much shorter they will clean better small places such as a Floyd Rose's saddles.
Alex Lopez Thanks for the tips, friend! I'll have to give it a shot.:D
+Battle Toad compressed air is really useful! you can get it at most computer supply stores.
Hi Jeff! Sanding the direct surface of the fretboard doesn't cause scratches?
I just bought an Ibanez S series guitar. It came with a Bound Jatoba fret board. I can’t find out how to keep it clean and maintained. Any thoughts would be great.
Thanks, Jeff. Any problem w/ leaving all the strings off the instrument? I have an LB76.
+Robert Kaye you should be ok.. generally it's not good to leave the strings off for an extended period of time
+Kiesel Guitars At the end of your video, you said not to play the instrument for about four hours post application of tung oil. What about re-stringing?
So there is no finish at all on this FB? I have a Ric 360W that has a maple FB with no finish so this method will work? No change in the color of the FB? Thanks!
I have a JEM77 BFP series guitar with tree of life inlay on fret board. Would the steel wool mess up the inlay ?
Is it safe to use 0000 steel wool on a fret board? I usually tape the board to clean the frets then condition the board
Can we use the minwax tung oil to all type of fretboard/fingerboard?, i mean for cleaning section?
Maybe tape the horn and other cavity too? Takes 5 seconds. I tape both pickups from magnetic dust. Invariably it gets to any pickup. Great video.
Suggestion? Pickup height adjustment and why. Malmsteen recesses the center pickup raises the other two. What sounds do you get by doing this?
Yes more behind the scene stuff , good idea
Can you make a video about how to put an hipshot bridge I am very curious because I want to put one on my guitar but don't know how to and how to set up a guitar would be sick and also a video on trust rod adjustment
I'm in Portugal, can you tell me what's the oil I can use here in Portugal, what's the ingredients or so?
Now THAT is a beautiful piece of fingerboard wood! BirdsEye Maple: the best! Hey Jeff is there any way to have any choice over a BEMaple board when ordering?? Like is there figuring amounts that can be chosen for different price grades of some way to really identify the specific wood that we want on our board?
And this won't scuff up big abalone inlays like on my CS6?
One word for you. Gorgomyte. Use that once and you'll never touch steel wool again.
Is this how you would clean a maple neck thats tung oiled? I just got my first Kiesel and want to keep it as pristine as possible
Yes, this is (in our opinion) the best way to take care of a dirty maple board
+Kiesel Guitars Would you also treat Rosewood with tung oil?
you can.. many people also use a lemon oil or any company's fretboard cleaner that you prefer!
@@KieselGuitarsTV why didn't you clean the grease/dirt of with naptha or meths first?
nice would you use the same oil on rosewood and ebony ?
you can actually use any wood treating oil on any wood.....depends on basically how much $$ you want to spend......you just have to read the good old instructions on the oil can.
Usually lemon oil but the guitar version rather than cheap lemon oil.
What about the back of the neck? How do you clean, go with grain? Love to see that because that’s always dirtier than your fretboard.
Try gorgomyte. It’s good shit
So you wait 4 hours to play it, but can you put strings on right away?
thanks
Friend of mine was about to clean his guitar (one I gave him some years back). Luckily, I stopped him before he started the work. Luck, again? Not luck but memory. I asked him to see this first. It proved a great help.
I do have a question on your necks on that guitar. What type fret wire are you using?
I thought steel wool messes up the fret board because it sands it off and scrapes it; damaging it.
Should mention to do this with good ventilation as tung oil fumes are not good for you. Makes for a nice finish though.
So as a fan of Carvin guitars and amps back in the 90s is Kiesel the new Carvin?
RIP to all the gloss fretboards that were screwed by people who are gullible enough aha
i thought all the grain was literally like guitar aids or some shit but i realized that its just birdseye maple.
I love ya Jeff but No way bro! DO NOT USE STEEL WOOL OMG NO ! And against the grain of the wood is another giant NO NO NO NO.
Steel wool turns wood and wood coated finishes gray! It is also an abrasive even though it's 4 O wool! A soft tooth bush against the grain, maybe, sure. You get a guy with a heavy hand doing what you just told him to do, that could be a problem.
SPRAY WINDEX on a soft cloth and wipe the neck until you can't get any more dirt onto the cloth. Never spray anything directly on a stringed instrument! Use a nylon soft brush like a toothbrush. The REASON I use windex is because it has ammonia in it and leaves nothing behind except the original surface of finish. It won't "attack" a painted finish. Sorry Jeff. I know you are a smart guy but I've been doing finish work and rebuilding high end pianos all my life. I also would NEVER put anything on a fret board that will leave residue left behind.
Surgeons scrubber
I personally like the way a maple fretboards gets dark with age/use.