How to Build a Shed: Installing the Personal Access (PA) Door

This video demonstrates how to install a prehung exterior door or Personal Access (PA) into a shed.
Purchase this prehung door here (Perth, WA): store.royssteel.com.au/pre-hu...
Remember to wear correct PPE (Personal Protective Equipment)
PART 1: Measure & Cut - 0:12
- Make sure you completely remove five ribs, so the door frame lands on pans on both sides
- Check the door size before marking and cutting
- Use an angle grinder to cut the Z's and sheeting
PART 2: Door Jambs - 0:38
- Mark the Z profile on to the door jamb
- These will form the cut lines
- Extend the the marks into lines
- Fits into the horizontal Z
- Use snips and cut along the line
- Repeatedly bend to break of offcut
- Cut out the remaining Z shape
- Test that the door jamb fits snugly in place
- Mirror the door jamb, by placing it on to the other jamb
- Mark out the profile
- Cut along the lines
- Repeatedly bend to break the offcut
- Insert the first door jamb
- Remove any tek screws that are in the way
- Insert the second door jamb
PART 3: Door Installation - 1:59
- First, hold the header flashing in the left most cut slot
- Mark the length
- From the marked point, draw cut lines around the flashing
- Cut along the line
- Repeatedly bend to break of offcut
- Insert the header flashing
- Insert the door underneath the header flashing
- Push to slot into the opening
PART 4: Tek, tek & tek - 2:46
- Tek the door jambs into place
- Tek the door frame into place
- Ensure the teks align with the sheeting teks
- Also make sure it goes into the Z and jamb behind it
- Peel of the protective plastic
PART 5: Footings - 3:33
- Tek the footing brackets on to the door jambs
- Drill holes using a hammer drill
- Use a hammer and hit the dynabolt into the hole
- Tighten the dynabolt with a spanner
PART 6: Lock - 4:01
- Use the lock as a template and drill a hole for it
- Rivet the lock into place
- Use a hammer to gently bend the four corners of the lock
- Install the handle
- Screw the handle into place
- Mark the location of the latch
- Drill a hole for the latch bolt to fit into
- Use a square filer to finish it off
PART 7: Silicone - 4:51
- Silicone the ends of the header flashing
- Using a wet finger, pat down the silicone
- Remeber to put tek screw back in
Requires:
- Tek Gun
- Angle Grinder
- Combination Square
- Door Handle
- Scissor Snips
- Rivet Gun
- Gloves
- Glasses
- Pop Rivets
- Teks
- Brackets
- Dynabolts
- Ear Plugs
- Hammer Drill
If you like these types of videos and would like to see more of them, please like/subscribe and let us know what you would like to see :)
Please let us know if you have any questions or if you have any recommendations.
--
Perth Wide Custom Steel Shed Suppliers and Builders
Website: royssheds.com.au/
Phone: [phone]
Online Quote: royssheds.com.au/request-an-o...
---
Song: Nekzlo - Back To Summer
/ back-to-summer

[@MrKeenaz]

Perfect Video. Exactly what I was looking for. Well done and great filmography too. Cheers.

[@RoysSheds]

Thanks, glad you liked it :)

[@ElectraFlarefire]

Ok, the kit of parts we have is looking less scary now.. Once we have the roof on(And if the suppler ever delivers the roller doors!) I'm sure we can do it with only a few minor stuffups now!
Thank you!

[@smashedcrab74]

Brilliant!

[@jasonbrough448]

Awesome video Roy(?), much appreciated!!!

[@RoysSheds]

No worries :)

[@omegaranch6579]

Great video, thank you! Any idea where you can get the doors stateside? The link you provided is only for in store pickup. Thank again!

[@RoysSheds]

Sorry, we make these locally but do not yet package/delivery them them. You might want to try your local shed supplier 👍

[@Jimbel500]

What is the model and brand of this door. Super easy install. I need 4, 3-0 doors.

[@BarnesysBuilds]

Do you sell these doors online?

[@RoysSheds]

Hi Barnesy's, not as of yet, but possibly in the future though :)