You guys work really hard for the money. I am enjoying your videos. Just found you this morning on a recommendation from you tube. I watch a bunch of other scrappers too
I enjoy your videos and watching you's load I was raised on a farm, I guess that's why I'm interested. Also badger must have a good women to bleach those tee shirt's of his or else he is. Lol. Old lady from.Sask. Canada.
Well I am happy that they seen fit to give up some but they only let you enjoy the moment for a little bit and take it back on something else. Looks like there is money to be made back east. Here in alaska, everything has to go out by boat so when scrap prices were so high back in 2015 or 17, we made some money here. This property used to belong to my bothers father in law and when he past then my brother scaped everything and I mean everything. The newest rig was in the fifties and there was tons and tons and he gave it away cause he wanted to sell out which he did the next spring... ruffly ten semi dump loads a day for over a month. A good third of the rig's ran and a lot of them still did cause I would go up and bottle feed them and fire em up. I hated seeing the forty one gmc with the double axle and long double booms, not one dent, covered with moss but it had the big 501 six cylinder motor and then a five and four trans. I liked that old truck. those guys fed it to their shredder and torched the ten hole wheels off. I even drove it the day he personally fed it to be crush/shredder and hauled it out. Oh well
Wow what a story! That many loads is unbelievable didnt know people held onto stuff like that. I've always said if I had it to do over again I would have saved all kinds of motors/trans, PTO, hydraulic cylinders etc for a couple years and hauled it to Alaska to live alone and build/make whatever I needed. It would be a personal goal/dream. So cool to start with nothing and end up with something you did alone
Ya those router add up weight fast ..I got a call from construction company I use to haul sand for .they got semi they repiar in house and the semi ones add fast too.dont take long get ton dealing semi parts lol
Greetings from northern Sweden and a fellow Scrapper. My yard pays flat rate for aluminium, cast, extruded or sheet it's all the same and they allow 10% steel with it so the odd screws does'nt matter. Nice video 👍
We hear you in Land o' lakes,WI.....what the fuck you going to buy now...we don't know but we're kickin it the same....fun making money...all day....new fans here....😶...winter sucks up here,slows me down but don't stop me.........
omg lmfao that fucking truck man omg i cant stop laughing at it, i literally thought the truck with the trailer in the back was the pile of scrap. I cant believe that piece of shit still runs god damn thats great man
Lol I'm glad your enjoying. Truth be told that truck has and will keep working circles around these pavement princesses that are on the road nowadays. Thank you for watching and commenting
You are joking here in Canada a rotor is worth 2dollars to 3dollars a piece we pay a 1dollar for them generally a lot of garages sell them to the guy that buys the cats and aluminum rims they will buy all the rotors also I know guys that have a run all through Ontario Canada that go for 2 or 3 day and buy all the cats. Rotors and rims only aluminum I can’t believe how much they gave you but I guess money is money wen you don’t have much others on the go
wow no way could get closs to 100$ in my area pickup are freacking expansive here and rarely on the market its hard to find part at the junkyard everytime one come in ther like 6 ppl on it just 4 tires worth more then that
jackpot digger really the truck is junk. While I was doing burnout the oil pressure dropped to zero so it's only matter of time before it runs motor. Some parts are valuable but we will see
Doing a burnout with that truck wasn't the smartest thing I ever seen. You got a good deal on it for only $100 . Heck do a little tinkering on it and you have another pickup to haul scrap with
It has other unseen issues, the diverter switch that switches the gas tanks (it has one on each side of bed) has something wrong with it and has to be squeezed to make fuel pump run. Brakes are gone (maybe just a line broken somewhere) but the biggest issue is that I didnt get a title with it so getting tags and legal would be very challenging if not impossible in Maryland. Thank you for watching and commenting
Named himself that one day digging through a dumpster... Its on one of my videos I cant remember which one though. He always calls me bobcat then he said " yea I'm your little badger digging up some sh*t in here!"
if you get something 4 cheap Why would you try to fuck it up by doing stupid burnout? Makes no sense why not sell it? That way you can make more money that way an not have to scrap it?
Why are you destroying the tires like that and the motor is knocking to begin with so why would you beat on it some more bro you are obviously not too bright are you just stick with the dumpster diving
Can we just take a minute and appreciate that the battle wagon's tailgate still closes...haha!
Hahahahaha yep still fully functional 👍👍👍 I have won alot of bets that the tailgate doesnt work
You guys are awesome. I love how you work well together and take care of eachother.
That truck bed is amazing!
You guys work really hard for the money. I am enjoying your videos. Just found you this morning on a recommendation from you tube. I watch a bunch of other scrappers too
Two great guys nice haul againbager still up to tricks Jimmy take care guys uk liverpool
Thanks for the vids. They are great. Scrap&palletman mentioned you and I've been watching since.
Dawn Hamilton thank you I'm glad your enjoying them. Yes Paul's shout out helped me alot
How about a video of the lunch break and some talk about how you first got started?
I enjoy your videos and watching you's load I was raised on a farm, I guess that's why I'm interested. Also badger must have a good women to bleach those tee shirt's of his or else he is. Lol. Old lady from.Sask. Canada.
When I was in 7th grade I coveted that Honda XL . It was 1983. Now you're just scrapping it like a pile of cans
Our price here has droped 25 a ton in the past month acr are still good keep on scraping
Well I am happy that they seen fit to give up some but they only let you enjoy the moment for a little bit and take it back on something else. Looks like there is money to be made back east. Here in alaska, everything has to go out by boat so when scrap prices were so high back in 2015 or 17, we made some money here. This property used to belong to my bothers father in law and when he past then my brother scaped everything and I mean everything. The newest rig was in the fifties and there was tons and tons and he gave it away cause he wanted to sell out which he did the next spring... ruffly ten semi dump loads a day for over a month. A good third of the rig's ran and a lot of them still did cause I would go up and bottle feed them and fire em up. I hated seeing the forty one gmc with the double axle and long double booms, not one dent, covered with moss but it had the big 501 six cylinder motor and then a five and four trans. I liked that old truck. those guys fed it to their shredder and torched the ten hole wheels off. I even drove it the day he personally fed it to be crush/shredder and hauled it out. Oh well
Wow what a story! That many loads is unbelievable didnt know people held onto stuff like that. I've always said if I had it to do over again I would have saved all kinds of motors/trans, PTO, hydraulic cylinders etc for a couple years and hauled it to Alaska to live alone and build/make whatever I needed. It would be a personal goal/dream. So cool to start with nothing and end up with something you did alone
Good stuff. Thanks for the video and information.
Mike Tyson aka The Fearless Badger :D. Nice vids, keep up the good work, shoutout from Romania!
Thank you for watching and commenting!
Thanks for the schooling on the roters
I want that dirt bike
Someone else has gotten months ago. Thank you for watching and commenting
Remember about 10 years ago when copper was like $12.50/lb? That was great.
I love that truck
Burnout!!!! yewww! good video
Ya those router add up weight fast ..I got a call from construction company I use to haul sand for .they got semi they repiar in house and the semi ones add fast too.dont take long get ton dealing semi parts lol
The bigger the truck the better hahaha. On average dump truck brake drums are right at 100lbs each I've noticed. I get them occasionally as well
Your truck has a small dent in the bed and i think you put a new scratch on that glorious paint job lol. Wish i had the scrap connections you had.
Dusty Martin man you have a good eye hahaha guess I have to get some touch up paint for the new scratch
Jimmy #1HMS lmao love rhe videos man. Tell the badger i said hello please.
Dusty Martin will do man. Thank you for watching
Jimmy #1HMS Thanks for sharing.
When it comes to steel wheels and clean drums an routers how do you know actual weight of either . You weigh everything together.
When you was throwing off the rotors you could see the truck going up....lol
Greetings from northern Sweden and a fellow Scrapper.
My yard pays flat rate for aluminium, cast, extruded or sheet it's all the same and they allow 10% steel with it so the odd screws does'nt matter.
Nice video 👍
Hey there! That seems like the best way to handle the aluminum..... there is one small yard near me that buys it in a similar fashion
We hear you in Land o' lakes,WI.....what the fuck you going to buy now...we don't know but we're kickin it the same....fun making money...all day....new fans here....😶...winter sucks up here,slows me down but don't stop me.........
That's truck in been lookin for LOL I want it
Hahaha you talking about the white ford?
9:14 the company I go to don't do that. You get #1 steel which is .7 cents a lb
Seems like a good deal for a $100.00 probably worth 3 times that in scrap ?
Cruiser Mac depends what I can sell off of it. Straight scrap value for today would be $225ish
Well you are ahead already no matter what?
Cruiser Mac absolutely. The burnout was worth that hahaha
Wheels alone go for $200-300. Called forged alcoas.
@@D4x4Bronc they should certainly bring that. Not curb rashed and all 4 matching hubcaps
persso i would fix that truck and keep it to myself it look clean for my side of view
jackpot digger I didn't get a title with it so there is no way of getting tags and on the road legally. It's pretty rusty on the bed of truck also
You got the perfect truck you only have to unload it with no effort do you make enough gas money to get enough money doing it
I make a living from scrapping seriously.
omg lmfao that fucking truck man omg i cant stop laughing at it, i literally thought the truck with the trailer in the back was the pile of scrap. I cant believe that piece of shit still runs god damn thats great man
Lol I'm glad your enjoying. Truth be told that truck has and will keep working circles around these pavement princesses that are on the road nowadays. Thank you for watching and commenting
Nice burnout by the way 👍
Dusty Martin have you seen my thank you video to scrap and pallet man?
Jimmy #1HMS I don't think I have. I'll check it out.
Jimmy #1HMS I did watch that video hell of a burnout.
Dusty Martin cant miss it... burnouts as the thumbnail picture.
You sir are crazy ok
You should’ve gave that man a hand.
what about the dirt bike is it scrap or fixable???
jackpot digger its probably junk. The motor is missing pieces. I put it on craigslist but no one has called
Great Score .I'm a Scraper to in Ontario Canada have Some Videos
Thank you.... pretty sure I saw you commenting on scrap kingdoms videos, I will have to watch some of yours
Why do you do that with cars that have good tires
187 dollars for the steel.not wroth the tear and wear on the truck plus gas to
Thank you for watching and commenting
You are joking here in Canada a rotor is worth 2dollars to 3dollars a piece we pay a 1dollar for them generally a lot of garages sell them to the guy that buys the cats and aluminum rims they will buy all the rotors also I know guys that have a run all through Ontario Canada that go for 2 or 3 day and buy all the cats. Rotors and rims only aluminum I can’t believe how much they gave you but I guess money is money wen you don’t have much others on the go
My core buyer used to buy them from me but suddenly stopped. I found another yard that will pay $10 per 100lbs so I have a box full I'm saving
wow no way could get closs to 100$ in my area
pickup are freacking expansive here and rarely on the market
its hard to find part at the junkyard everytime one come in ther like 6 ppl on it
just 4 tires worth more then that
jackpot digger really the truck is junk. While I was doing burnout the oil pressure dropped to zero so it's only matter of time before it runs motor. Some parts are valuable but we will see
@@1320LUV could put a set of main bearings in it.
@@D4x4Bronc owner had passed away and title was lost.... so really not worth putting money into( in my opinion anyway)
For the cream nice one hms
Dumpster Jerry thanks mr stainus
Was waitin to pop the tires lol
dam that dumper is fast!!!
jackpot digger I know it's by far the fastest dump we have hahaha I'm glad someone else realised that
I can't believe they are Junking that dirt bike, and I would give you $200 for that truck LOL
What year is that gold color Chevy pickup
66 short bed small window. Had it since I was 16
How many places you sell scrap to?
Now just two. One gets all my steel, and the other gets all my non ferrous (brass copper etc)
maybe badger having a bad day its throwing his vision off lol
Hahaha maybe so!
👍👍
Why don't you break down the electric motors? I see alot of them in your videos.
Nice
Thank you!
Nice job! I guess your gonna get the truck to the yard to be crushed?
caver1 no title with the truck... will have to take it apart
Got ya
Oh n
You got Sanford and Son here LOL are you guys doing
Hey there!
wow was that honda not worth selling for a parts bike or rebuild?
killswitch489 I will give it a chance on craigslist for a week or so
Doing a burnout with that truck wasn't the smartest thing I ever seen. You got a good deal on it for only $100 . Heck do a little tinkering on it and you have another pickup to haul scrap with
It has other unseen issues, the diverter switch that switches the gas tanks (it has one on each side of bed) has something wrong with it and has to be squeezed to make fuel pump run. Brakes are gone (maybe just a line broken somewhere) but the biggest issue is that I didnt get a title with it so getting tags and legal would be very challenging if not impossible in Maryland. Thank you for watching and commenting
That makes sense although it is a shame.
How did badger get his name
Named himself that one day digging through a dumpster... Its on one of my videos I cant remember which one though. He always calls me bobcat then he said " yea I'm your little badger digging up some sh*t in here!"
if you get something 4 cheap Why would you try to fuck it up by doing stupid burnout? Makes no sense why not sell it? That way you can make more money that way an not have to scrap it?
whats on your hat?
Me and wifes business name. Trashy diva dumpsters.... dumpster rentals
Why are you destroying the tires like that and the motor is knocking to begin with so why would you beat on it some more bro you are obviously not too bright are you just stick with the dumpster diving