How to connect a Microphone add Audio to a DVR NVR with audio connectors
Вставка
- Опубліковано 6 жов 2024
- Instructional video on how to connect a covert or normal microphone to an existing CCTV system DVR or NVR with audio input.
Using the '20m Covert Audio Surveillance Kit connect to DVR or Standalone Covert Microphone' from Netview CCTV
available to purchase here:
www.netviewcctv...
www.netviewcctv...
www.ebay.co.uk/...
www.ebay.co.uk/...
*I like the pan and tilt feature. great **Newest.Technology** camera!*
This video is so weird and DIYish but I think it's the best video on topic ,I watched 4 video before and did not get the point,got so lost in wires .Here, one shot ,kaboom,I got it . Thanks a lot,
Installed it myself without any issues. The wifi signal is great even ua-cam.com/users/postUgkxE_D_sddGAdiVUKp7PkkmyxO7bRtgqmk5 when the router is located far away. I really enjoy the night vision feature that allows me to see clearly any activity near our house (mostly cars and wild animals). The motion detection is helpful to me as well to monitor what happens on our front.
Wow great explanation!!!👍👍👍 Thank you for being kind sharing information!
From indonesia, thanks bro very helpful
Thank you, Really helped job done!!
thank you for you video that's exactly what I was looking for !
excellent video, very informative, thank you...
Thanks for sharing..it is a big help, very clear.Godbless and more power
www.amazon.co.uk/dp/B071JXCX63
Thank you! Very informative! 😁
good training. Thanks
Thanks I found your video very informative and helpful.
Very informative
thanks
Swann said you can plug an off the shelf RCA cabled speaker into the audio out and it should work. The cable does not seem to fit snug in the audio out port. I have to put pressure on it to make it “connect”. Is there a connector I can buy to make the RCA cable work better?
thx brother ... very nice explain :)
well explicit
Great stuff
Can only one microphone be connected or can several? And if it can be several, how?
There is missmatch in between Audi and video singal, how to solve?
Hi thanks for the info. But what if you need more than one Audio receiver? ie. You need audio in different locations?
The latest Hikvision DVR's are all AoC compatible (Audio over Coax) so every AoC camera installed can have its own audio channel.
I have 6 camera can I install a mic on all of them, is this possible?
do you have a how to on setting up the dvr to remote viewing...thanks
Use Hik-Connect App for remote viewing, no setup required
Oh my God ! you put me to sleep and got me very dizzy the way your showing this .........
please is it possible to connect multiple audio devices to that kind of DVR that has only one(1) audio input or is there a DVR that has multiple audio input?
Do you have to use BNC connector and video leads would it not be better to use phone jack music leads
Yes you can use audio cable with RCA/Phono connectors
@@NetviewCCTV cheers mate
thanks !!!
good day mate just want to ask what to do if i have 4 camera and want to connect microphone on each camera with single audio in port on DVR, thank you in advance
So Friday is there audio and video for them cameras or no as I would like to have both
My friend, I did the same thing and it did not work. I use the same DVR in 8 CH but as a hybrid. I selected the channel type Ip camera, because I connected 4 pieces of IP camera. The external microphone I have just like you connected but I get no sound. I can not click in the setuop AUDI / VIDEO. Do you have any idea?
y split the camera power just run the lead bk to dvr and split it there seems very confusing
What about powering the recorder?
plz use that black camera
anyone knows possible maximum length of a cctv microphone?
Is it possible for 2 microphones? Or just 1 only?
Depends how many "in" ports you have at the back of your nvr or dvr
Why would you want only a one way audio. If someone standing at you door how can you say, can i help you from a smart phone if you're not home?
The camera already have built in mic
So just to confirm. You plug the microphone in plug the microphone in, plug the microphone in as such....? I got it.
can we give the audio output to the tv earphones jack directly from the DVR....please help
No the TV earphonre jack is for TV audio out only.
The audio out can be plugged into the AUX of your stereo amp then you can listen using head phones
I am getting distortion in cctv audio after just few seconds of play back, the audio is perfect for only 2 secs, then there is a gradual increase in distorting sound, how to fix it? does anyone have any idea about this?
Hi guys just bought a cctv dvr kit and want to add a microphone the cables i have only have the standard two two ends and the mic i have has only two ends do i need to get another cable with 3 ends Video Power Audio, new to this so not really sure an answer would be appreciated
www.amazon.com/dp/B071KFDBFT
why not just use 20 metre phono cable ?
Question : I got my phone set up with my DVR I can see my cameras through my phone around the house but when I get work I'm using the job Wi-Fi but I cannot see my cameras ! can you place tell me what part I'm missing ? or is because my DVR got no live stream ???
You can see them in the house because you are on the same network as the DVR. Once outside because you are on a different network you have to forward (open) ports on your router. The ports will be specific to your DVR so google 'your DVR model no' + port forwarding.
iv done exactly what you said but still have no audio? could you help me? thanks
FastPuma you need to find audio out on your DVR then connect to your TV
This video missed one most important part. always remember not all analog DVR XVR Channels are equal unless stated. For most recorder, always allocate most important recording to Channel 1 and channel 2 for highest resolution or even manual RCA audio recording. If your channels are prioritised correctly, then you should go to camera setting for cam 1 or 2 to include audio recording.
I've connected a passive microphone (without power supply) to audio-in port and set video and audio recording but I hear only crackling noise. Does someone know exactly what type of microphone is supported.
A passive mic will not work. You need to power the mic with 12volts dc
you have to have a pre amp. with a condenser mic. or just use an electrec mic.
how can I use a 2 way audio? Why does super live pro software running on my android show a speaker icon and a phone icon on the bottom with a green bars on the talk side. Meaning it's giving you the option to talk as well as listen! What good is it if you're not home yet see someone at your front door on the android. I hooked up a mic. to channel 1 and can hearmyself speak coming from my android, but if I try using my android with the talk icon as I talk into the phone I can hear myself coming from the tv mon. ok good right, no because when i hook an amp,to the output of the NVR i can hear myself but I get feedback, so it wont work! why the hell does super live pro have this option but the Nvr dont. MY question can i put a mic. at my front door connected to the input of the NVR and put an amp from the output to a speaker also at my front door for 2 way using my android 2 way option?? Will it work?? Thanks
how do you call the cable plug into the camera to the DVR ? can I get it at eBay ?
for analogue cameras you need RG59 cable.
can I have audio & video for more than one camera?
yes if your recorder has multiple audio channels. normally they have only 1
You can also run 2 camera audio sources thru 1 channel using an audio splitter
Hi Net view CCTV.What do I need to do view remotely on Android phone at work?I have port forwarded/port triggered everything according to Bunker Hill item 61229 manual.
Hi You need to ask the supplier/manufacturer which app will work with their equipment., Apps for mobile viewing are manufacturer specific.
OK thank you.it is Bunker Hill but they have no customer service.I appreciate your response.
Try an App called Asee, I believe it works with Bunker Hill : play.google.com/store/apps/details?id=com.ASee&hl=en_GB
Other common popular one is vmeye
OK will try those again.thanks!
my cameras don't give a clear picture,how can i adjust them?
+Samuel Sello Kekana , if connecting Analogue cameras via the BNC connectors then try using Ground Loop Isolators to clear up image ghosting, distortion etc due to ground loops or electrical interference on the system. Regards netviewcctv.co.uk
good information
can be RG59 or RG58 cable ?
RG59, or with power is also referred to as 'Shotgun' cable
RG59 has a solid copper centre conductor. RG58 has a stranded copper centre conductor making it more flexible for multiple dvr/matrix racks. Either can be used to transmit audio
hi anyone help me i have a 8 channel dvr with 4 cams channel 4 has a separate mic problem is i can hear audio no problem in real time but on playback there is no sound ?? anyone know wat the issue could be here ??
Managed to fix mine it was a setting I hadn't checked all done now 👌
timcat100 I will check my settings wen I get home
A shame (possibly for some) that you didn't show how to connect using your (20m?) cable with the power supply at the DVR end and delivering the power over your long cable and then connect the power from the long cable to Mic power in and then from the Mic power out to the camera power in. The way you showed the connection at the end of your video you were relying on the camera being within a few feet of the DVR so it would connect to power. Otherwise, thank you for your effort.
Hi reading your post I can relate to that I've done exactly that my system works perfectly during the day but on a night my DVR shuts off and start a few time within 10 mins each time. Do you think I've got a short or some sort of connection problem Thanks if you can help
bro backup audio not working what to do bro
Way to many errrrrrrrrrssss
So just to confirm. You plug the microphone in plug the microphone in, plug the microphone in as such....? I got it.