Plumber Installs a waste pipe and seals the joint with soudal cement repair express.

Поділитися
Вставка
  • Опубліковано 29 січ 2025

КОМЕНТАРІ • 7

  • @mikejames4271
    @mikejames4271 День тому +4

    Fiver for 2 pipe snugs. You don't need any jollop. They work brilliantly, especially if you core the correct size hole.

  • @duncanashley5907
    @duncanashley5907 День тому +2

    If you drilled the correct size hole, you’d only need a small clear silicone seal around the pipe

  • @gtarist1
    @gtarist1 День тому +2

    Hi Allen, good work. I watched your combi boiler UA-cam ,clips informative thanks 👍 Here I am paying it back with a useful tip for you ,(for drilling through walls)
    Step 1. From inside drill through on hammer with a long SDS masonry bit, switch off hammer for approx last 10mm, then when drilled through, go outside and locate a hole + confirm that it's exactly where you want your pipe to come through. Step 2. drill about 20mm from outside with hole cutter. Step 3. Drill from inside. This method's first step helps to confirm that you have drilled in exactly the right place for alignment with drain etc outside (helping to prevent costly mistakes or accidents!). 3rd step should help to prevent brick face bursting, leaves a very tidy job for customer, you may want to try it and make a video? Stay safe 👍❤

  • @micmac69
    @micmac69 День тому +3

    Why do people drill from the inside knowing there going to blow that brick🤔

  • @LynGriffiths70
    @LynGriffiths70 2 дні тому +1

    I like it but probably a tenner just to cement around a pipe rather than just mix a bit of compo from the bag that's inevitably half open on the van from the last job.

  • @robthesamplist
    @robthesamplist 2 дні тому +1

    Im sure its great stuff but does it dry a bit darker? They should have different shades that would be a nice touch but make it dearer no doubt.

    • @tonyadams380
      @tonyadams380 День тому

      They do 2 or 3 different colours