UPDATE! My 2.0 Holocrons are NOT broken! Thank you very much to my viewers for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
holding down the black dots will cause the new Holocrons to go into a sync mode since they can be paired with the old ones you have to let go once the audio starts
I love how on the 1.0 sith holocron, you took your fingers off as he started talking, yet on the 2.0’s you held on. You have to let go once they start talking.
Thanks for screwing up with the holocrons; I did the same thing too! 😅 Yours was the first vid I found when I went looking for answers. And thanks to your commenters for setting us strait. To both our credits the v2 instructions tag says to "press and hold two sides" with no mention of letting go when the voice starts, and the v1s don't have this problem. 🤷
I had the same issues when I initially tried mine. I started with a red crystal in the Sith holocron and it would cut off shortly after triggering a message. For whatever reason, this happens when you continuously hold the 2 side buttons to activate. I'd tried releasing my fingers once a prompt started and everything worked as it's supposed to. Hopefully same issue for you and they're not defective!
@@FindingTheForce keeping your fingers on the trigger points puts the holocrons in pairing mode so you can place them on top of each other and unlock different characters, You have to put both holocrons in pairing mode. I thought mine were defective too until I read on how to use them.
@@FindingTheForce You can clearly see you holding your fingers continuously on the two touch points. Just touch them and completely release and it would work as expected. Read the instructions that came with the two holocrons and you will see it is a new feature built into the series 2 when holding the touch points for 5 secs.
So my daughter picked up a Sith Holocron. I had to break it to make it work. First one of the capacitive pads was not on right, the screws were too tight? And didn't let the 'cron work properly when putting in crystals. It works now, but not impressed with the shoddy workmanship. Love the 'cron though, I hope no one has the same issues.
They're not broken! You're not supposed to leave your fingers on the trigger markers! Touch the trigger markers brifely then remove your fingers. This happens with all of them.
@@FindingTheForce It actually should. It's a feature they have that puts them in pairing mode. Then you put them together with another holocron to unlock new characters.
I tried it after watching this, Mace Windu crystal in my sith holocron, it turned purple, you can hear Vador speaking then it goes blue lol not sure if that's supposed to happen..
Please update this video @findingtheforce This is not a defect, it is a feature when using the new series 2 holocrons together (sith/jedi), and you have to hold for 5 secs to activate special feature, it is even outlined in the instructions that came with the holocrons. To operate normally, you must only briefly touch the two pads and release when sound starts. EVERY SINGLE series two will change colors if you keep you fingers on the two touch points. You even did it right on the first sith holocron example
I had the same problem. I found out that the V2 are different than v1. You don't keep holding the activation buttons during the voice. Once you activate the voice, let go.
all V1 crystals work as normal in the V2 holocrons and V2 new crystals/ voices will only work in the V2 Holocrons , putting V2 crystals in V1 holocrons will give you a V1 character
Not defective, story wise with Luke's Green, going to the dark side. Darth Vader's holicron goes blue with his inner turmoil going to the good side. Also when they switch colors, and you stack them on each other they bring on the voices of the ashlen and bogen. Try using old holocrons with new holocrons as well, you'll be surprised
That is pretty awesome obi-dad though I'm disappointed that the new kyber crystals don't have different sounds and colors in the savi's workshop lightsaber I mean a little change in the lightsaber isn't too much to ask is it
FindingTheForce, I am eager to buy a good quality lightsaber and I have confronted with the company called "saber factory". Since a lot of companies can be unreliable I wasn't sure to purchase it; moreover, I know you have dealt with lightsabers for a long time. Therefore, I wanted to ask you that have you ever bought a lightsaber from this company and if you did how was your experience?
Unbelievable Disney still didn't fix the Luke Lightsaber to have the green arrow facing up and red arrow facing down. No gonna lie, this would be a reason for me to not buy it.
UPDATE! My 2.0 Holocrons are NOT broken! Thank you very much to my viewers for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
I had the same problem, no need to be ashamed, if you look at the retail tags that came in the mesh bags they came in. They explain how they work.
Batuu Smuggler 72 on IG can send you anything from the Disney parks from pins to popcorn buckets! Thanks Kevin for the help! 🙏🏻👋🏻
holding down the black dots will cause the new Holocrons to go into a sync mode since they can be paired with the old ones you have to let go once the audio starts
hahaha... I should have messaged you before hand! lol how embarrassing, need to make a follow up video now lol
Thanks for the heads up 🙏🏻 ua-cam.com/video/lSxWbqnJV_U/v-deo.htmlsi=74iQawwrdRaNB9Km
I love how on the 1.0 sith holocron, you took your fingers off as he started talking, yet on the 2.0’s you held on. You have to let go once they start talking.
Thanks for screwing up with the holocrons; I did the same thing too! 😅 Yours was the first vid I found when I went looking for answers. And thanks to your commenters for setting us strait. To both our credits the v2 instructions tag says to "press and hold two sides" with no mention of letting go when the voice starts, and the v1s don't have this problem. 🤷
I had the same issues when I initially tried mine. I started with a red crystal in the Sith holocron and it would cut off shortly after triggering a message. For whatever reason, this happens when you continuously hold the 2 side buttons to activate. I'd tried releasing my fingers once a prompt started and everything worked as it's supposed to. Hopefully same issue for you and they're not defective!
@@FindingTheForce keeping your fingers on the trigger points puts the holocrons in pairing mode so you can place them on top of each other and unlock different characters, You have to put both holocrons in pairing mode. I thought mine were defective too until I read on how to use them.
@@FindingTheForce You can clearly see you holding your fingers continuously on the two touch points. Just touch them and completely release and it would work as expected. Read the instructions that came with the two holocrons and you will see it is a new feature built into the series 2 when holding the touch points for 5 secs.
Thank you very much for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
@@usmcculp Thank you very much for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
Thanks for the heads up 🙏🏻 ua-cam.com/video/lSxWbqnJV_U/v-deo.htmlsi=74iQawwrdRaNB9Km
Fyi there's still the black crystal but also cracked red/blue crystals in the red and blue canisters.
So my daughter picked up a Sith Holocron. I had to break it to make it work. First one of the capacitive pads was not on right, the screws were too tight? And didn't let the 'cron work properly when putting in crystals. It works now, but not impressed with the shoddy workmanship. Love the 'cron though, I hope no one has the same issues.
Dang, way to go Dad for coming through and fixing that for her! 👏🏻🙏🏻
They're not broken! You're not supposed to leave your fingers on the trigger markers! Touch the trigger markers brifely then remove your fingers. This happens with all of them.
Yep, once you activate the voice, let off the sensors
It’s supposed to do that.
But yes, you’re supposed to just activate it with the two fingers and take your fingers off the two sensors
@@FindingTheForce It actually should. It's a feature they have that puts them in pairing mode. Then you put them together with another holocron to unlock new characters.
Thank you very much for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
You should make a video on the force park v2 app its really cool for your lightsaber!
7:43
There is still good in him.
My main problem is I took off the sticker and there's no other good way of knowing which side is the top without it lol
I tried it after watching this, Mace Windu crystal in my sith holocron, it turned purple, you can hear Vador speaking then it goes blue lol not sure if that's supposed to happen..
Oh noooo…. 😱😱
Thanks for the heads up 🙏🏻 ua-cam.com/video/lSxWbqnJV_U/v-deo.htmlsi=74iQawwrdRaNB9Km
10:12 You owe your son an apology….no I’m j/k. I don’t have any new Star Wars merch, just curious. Cheers everyone, May the Force be with you.
I want those wavefinders
9:02 I guess it really isn't easy being green...
😂😂🤣🤣 🐸
Please update this video @findingtheforce This is not a defect, it is a feature when using the new series 2 holocrons together (sith/jedi), and you have to hold for 5 secs to activate special feature, it is even outlined in the instructions that came with the holocrons. To operate normally, you must only briefly touch the two pads and release when sound starts. EVERY SINGLE series two will change colors if you keep you fingers on the two touch points. You even did it right on the first sith holocron example
Interesting, thank you for letting me know. I will be sure to look into this.
Thank you very much for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
Thanks for the heads up 🙏🏻 ua-cam.com/video/lSxWbqnJV_U/v-deo.htmlsi=74iQawwrdRaNB9Km
Yeah I ran into the same problem don't hold it down.
I had the same problem. I found out that the V2 are different than v1. You don't keep holding the activation buttons during the voice. Once you activate the voice, let go.
Thank you very much for pointing out my mistake, how embarrassing! Lol 😂🤦🏼♂️ I will be posting a follow up video very soon.
@@FindingTheForce don’t be embarrassed. I made the same mistake. I actually accidentally came across the solution.
Thanks for the heads up 🙏🏻 ua-cam.com/video/lSxWbqnJV_U/v-deo.htmlsi=74iQawwrdRaNB9Km
We need a review of the disney store darth maul saber plz
Here you go bud, thank you so much for watching ua-cam.com/video/hJEfzaZcj9I/v-deo.htmlsi=HdUq00bY05Q_Qq_e
Still no Orange Kyber Crystals yet???
Does anyone know if a v1 snoke black kyber crystal sounds like sidious in the new v2 holocrons and if they work with wayfinders?
all V1 crystals work as normal in the V2 holocrons and V2 new crystals/ voices will only work in the V2 Holocrons , putting V2 crystals in V1 holocrons will give you a V1 character
@@SirJamesIGamerfuzion Thank you!
I’m glad I don’t need to worry because I have the v1 holocron 😊
Oh, they weren’t broken, lol 😂
The v1 sith without a crystal was Darth Bane not the Emperor
Not defective, story wise with Luke's Green, going to the dark side. Darth Vader's holicron goes blue with his inner turmoil going to the good side.
Also when they switch colors, and you stack them on each other they bring on the voices of the ashlen and bogen.
Try using old holocrons with new holocrons as well, you'll be surprised
I tried to make a lightsaber but it was all reserved
zlex
flores flores
I need the grand Inquisitor
That is pretty awesome obi-dad though I'm disappointed that the new kyber crystals don't have different sounds and colors in the savi's workshop lightsaber I mean a little change in the lightsaber isn't too much to ask is it
Well that’s too bad. 😕
FindingTheForce, I am eager to buy a good quality lightsaber and I have confronted with the company called "saber factory". Since a lot of companies can be unreliable I wasn't sure to purchase it; moreover, I know you have dealt with lightsabers for a long time. Therefore, I wanted to ask you that have you ever bought a lightsaber from this company and if you did how was your experience?
Batuu is an amazing smuggler. 👍👍
Unbelievable Disney still didn't fix the Luke Lightsaber to have the green arrow facing up and red arrow facing down. No gonna lie, this would be a reason for me to not buy it.
Not obi dad kenobi reading imbYOU’d as embed 😭
Looks like the holocrons don't know what they want to be 🤣
Looks like battery needs charging.
I did charge it Paul! Didn’t you see? 😉😂
@FindingTheForce yes I saw you said you charged it. Also I sent you a voice message.