It's worth noting that the blue circular height locking ring half way down must be fully rotated and click into the lock position, otherwise it will impede the flush mechanism. Even a couple of millimetres out of full lock will do it. It's not always easy to see that you've done this when working in tight cisterns when you can only turn it with your finger tips.
I do not know how it works exactly but i have noticed that when you push de half button "big" then the rod comes out about 2mm further then when you push te "little" half button.
Can Geberit answer the question posted 11 month ago: "how do the half flush & full flush works? there is only a single contact point but the button have 2 halves". Thank you
@@GeberitGroup The installation is fairly easy but having the flushing control (half/flull) is impossible to unerstand how to make it work properly. Can @gaberitgroup explain steps to check for fault finding ?
@@davidaqu I'm not sure I understand what exactly isn't working. I would recommend contacting customer service in your country. If you let me know where you're from, I can provide a contact.
@@davidaqu I'm afraid we can't help you via the comments. Please let me know which country you are based in and I'll be happy to put you in touch with a service centre.
Bonjour, Problème : dès que je relâche l'un des 2 boutons, l'écoulement s'arrête. Si je maintiens l'un des 2 boutons appuyé, le réservoir se vide complètement. Donc aucune différence entre le bouton 'petite quantité' et celui 'grosse quantité'. Et la quantité d'eau évacuée dépend donc du temps d'appui sur le bouton et non du réglage. Que faut-il faire pour qu'un appui sur un bouton déclenche juste la quantité d'eau prévue par le réglage ? Merci.
Modern and gives confidence. Obviously Hugh quality and modern design. I can not wait to instal something like this
It's worth noting that the blue circular height locking ring half way down must be fully rotated and click into the lock position, otherwise it will impede the flush mechanism. Even a couple of millimetres out of full lock will do it. It's not always easy to see that you've done this when working in tight cisterns when you can only turn it with your finger tips.
thanks
ez igen e hegyi márk ❤❤❤❤
Very good now I can go to VanMarcke in Belgium
how do the half flush & full flush works? there is only a single contact point but the button have 2 halves
I do not know how it works exactly but i have noticed that when you push de half button "big" then the rod comes out about 2mm further then when you push te "little" half button.
Can Geberit answer the question posted 11 month ago: "how do the half flush & full flush works? there is only a single contact point but the button have 2 halves". Thank you
The button has two actuator trigger pushing down the corresponding buttons.
@@GeberitGroup The installation is fairly easy but having the flushing control (half/flull) is impossible to unerstand how to make it work properly. Can @gaberitgroup explain steps to check for fault finding ?
@@davidaqu I'm not sure I understand what exactly isn't working. I would recommend contacting customer service in your country. If you let me know where you're from, I can provide a contact.
@@GeberitGroup Thanks for your reply. The issue is how can i set it the unit to perform a half flush.
@@davidaqu I'm afraid we can't help you via the comments. Please let me know which country you are based in and I'll be happy to put you in touch with a service centre.
Bonjour,
Problème : dès que je relâche l'un des 2 boutons, l'écoulement s'arrête. Si je maintiens l'un des 2 boutons appuyé, le réservoir se vide complètement. Donc aucune différence entre le bouton 'petite quantité' et celui 'grosse quantité'. Et la quantité d'eau évacuée dépend donc du temps d'appui sur le bouton et non du réglage.
Que faut-il faire pour qu'un appui sur un bouton déclenche juste la quantité d'eau prévue par le réglage ?
Merci.
Pareil chez moi. Same here
👍👍👍👍👍👍
Sorry, i can{t understand how it works...
Sorry to hear. What part is not understandable? So we can feedback it to the production team.
Thanks for answer!. I can{t understand how the valve (internal) works... not the instalation, the internal works... Thank you very much
Ah, ok. For the function of the valve we don't have a special video. Sorry
I nees help. Just bought such thing but still water is running in the toilet. Please help!!! I installed it like in the video. Heeelllppp
Preise zeigen
Die Preise nennt der Installateur Deines Vertrauens. :-)