Es importante no sólo compartir cuando todo sale estupendamente, prueba y error y así hasta que salen las cosas como quieres. Muchas gracias por vuestra perseverancia y por compartirlo.🫂🇪🇦😍@@kimandniallsarts
I use contact paper from the dollar store. I think it’s a lot cheaper than the circuit transfer paper. Thank you for a very nice video. And just ignore the haters they’re stupid.
Any negative comments will be removed and blocked please remind yourselves to be kind. All comments contribute to our channel algorithms don't choose over negative or positive comments so I will remove to keep this channel positive vibes only
Hi everyone thankyou for your comments and advice we are not claiming to be experts teaching we are learning and experimenting ourselves sharing our experience. Everyone is a beginner at some stage most UA-camrs only show was works so we wanted to show what didn't work for us. We are going to re visit silicone mold making again for Halloween 🎃
I like your method.. especially mistakes making and becoming better every step.. Hatsoff to the teacher like you.. you have got another subscriber and the consistent student from India ❤..by the way love you work❤.. Does that holographic effect remain on the mould or it goes off after second use.. your student will wait for your answer...❤❤
@@kimandniallsarts no problem some people use torches or heat guns to pop bubbles ,but i would not suggest that with a mold as you could melt it. you could use a hairdryer i guess
@@kimandniallsarts spray with alcohol before pouring to help reduce bubbles, when unmolding, lift part of the mold away from the piece and spray liberally, then you can smoosh it around for an easy release. Careful sometimes the piece will pop out really fast lol
Really dislike the obnoxious music. The editing is choppy and confusing, but appreciated the inserted text to explain what was supposed to be going on..
Aw sorry to hear the music annoyed you we are newbies to UA-cam and appreciate you liked the subtitles and the feedback we did struggle to edit this video lol
Admire your persistence, I was rooting for you, great job.😊
@@Georgienne6767 aw thankyou we are learning but wanting to share our experience with everyone so we can help 🙂
Es importante no sólo compartir cuando todo sale estupendamente, prueba y error y así hasta que salen las cosas como quieres. Muchas gracias por vuestra perseverancia y por compartirlo.🫂🇪🇦😍@@kimandniallsarts
@@kimandniallsarts as am I. I have had no success with making a soft white bloom.
Great editing, this could have been tedious but it wasn't.
Good episode. Thanks.
Thankyou it's a working process I think we might need a stronger silicone. This is very soft and tears easily.
Need a deep pour resin to ensure no air bubbles, at least a 48 hr cure. 😊 Great effort in making those molds! Wow, that was a lot of work!
Aw thankyou I think someone else has said try the deep pour so thankyou for your advice this is why we share we are learning too x
Love the use of the table cloth, such a great idea and beautiful outcome. Thank you for sharing x
Thankyou 😊
I dig the music as well as the video ❤
Thankyou 🥰
That was smart to do the cloth. I was going to mention it but I didn’t know what it was called. Looks awesome
Aw thankyou it's just a holographic table cloth from temu 😅
I like this video
@@sanketpanchal077 thankyou we don't hide when things go wrong because we learn that way 😆
Great video, fabulous ideas
@@annmarie8414 thankyou 🥰
Awesome Video 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
Thankyou so much
Amazing video I have to try this
Thankyou let us know how you get on 🥰
@@kimandniallsarts please let me know when your molds are available
@@imyoleaHi thankyou for asking but they're not for sale unfortunately we are just making our own for personal use.
I use contact paper from the dollar store. I think it’s a lot cheaper than the circuit transfer paper. Thank you for a very nice video. And just ignore the haters they’re stupid.
Any negative comments will be removed and blocked please remind yourselves to be kind. All comments contribute to our channel algorithms don't choose over negative or positive comments so I will remove to keep this channel positive vibes only
Nice video. Don’t worry about comments from people who feel the need to inject negativity for no apparent reason.
Thankyou so much 🫣
Hi everyone thankyou for your comments and advice we are not claiming to be experts teaching we are learning and experimenting ourselves sharing our experience. Everyone is a beginner at some stage most UA-camrs only show was works so we wanted to show what didn't work for us.
We are going to re visit silicone mold making again for Halloween 🎃
Hi everyone a new wedding heart video is in the making its over an hour long im trying cut it down if i can make it shorter i will 😂
I like your method.. especially mistakes making and becoming better every step..
Hatsoff to the teacher like you..
you have got another subscriber and the consistent student from India ❤..by the way love you work❤..
Does that holographic effect remain on the mould or it goes off after second use..
your student will wait for your answer...❤❤
Thankyou so much for your kind words
Since I wouldn't want to have to clean up the most important facet I would have stuck it down on one of the facets in the back.
I think people use hot glue we have bought some now we tried transfer tape but it wasn't enough in its own to stop the leak.
You do know that the bubbles come to the top then pop them when you stir it you create more
Im probably not supposed to react this way but I'm glad people are finding this process as frustrating as we did you can see our struggles lol
Hey people are selling holographic silicone molds I believe it's permanent once it's made
Thankyou for your kind words we are happy to learn with others and share experiences 🥰
simple vacuum pump would have helped draw out your air bubbles you can buy them cheap
Thankyou we are only into this for two years don't have all the gadgets yet unfortunately.
@@kimandniallsarts no problem some people use torches or heat guns to pop bubbles ,but i would not suggest that with a mold as you could melt it. you could use a hairdryer i guess
Ohhhh, the struggle 😢
I nearly gave up lol I'm glad we didn't the holographic worked atleast lol
Where's September & October, sapphire & opal
We will be making them all we are doing them each month 🙂
Spray your mold with 90%alcohol to un mold items or unmold the mold itself lol
Thankyou all advice is appreciated 👍🏻 we haven't tried any release sprays apart from soap and water 💦
@@kimandniallsarts spray with alcohol before pouring to help reduce bubbles, when unmolding, lift part of the mold away from the piece and spray liberally, then you can smoosh it around for an easy release. Careful sometimes the piece will pop out really fast lol
😮😮😮😮
Hi please check out our community posts we have been given a 10% off Discount code for Epoxy resin & Micapowders
Sorry all I learned was how to waist products 😮
@@paulkelly7585 it's called learning and experimenting everyone is a beginner and we don't waste products as you can re use the silicone and epoxy
Way too many bubbles..
@@misskay4165 I know those pesky bubbles are annoying aren't they I've been told to try deep pour next time.
Really dislike the obnoxious music. The editing is choppy and confusing, but appreciated the inserted text to explain what was supposed to be going on..
Aw sorry to hear the music annoyed you we are newbies to UA-cam and appreciate you liked the subtitles and the feedback we did struggle to edit this video lol
Too confusing
Your confused? how we felt it was our first time doing this lol
Hi we now have a discount code for lets resin products code KIMANDNIALL for 10% off 🎉❤ they sell silicone rubber liquid 🥰