Está muy bueno, el único problema es que, el caudal de agua que sube al tanque es menor al que baja. Por ende en 5 min el tanque se descarga. Fin del movimiento..
@@LIFEGADGET puede cimprar un dinamo de bicicletas y una bomba de agua para que el agua haga trabajar al dinamo y el dinamo a la bomba y ya seria una coordinación del agua al dinamo y del dinamo a la bomba del agua
you slightly open the jar cap to enter the air.... this is a reason why the jar almost already half before the suction of water begin... but without entering air from cap the water can't flow outside the container.... because of the limited pressure can take from small hose
In order for certain new technology to be expressed, or to be released, there has to be a willingness to receive it. And this requires both the change in the collective consciousness but it also requires that there are certain scientists who are willing to question what most scientists are currently not questioning, including materialism. Now, just as a concrete example here, you have the whole concept of free energy. This can be explained actually in terms of what is currently known by quantum physics. You have observations made by quantum physicists in bubble chambers, that you can have a state where there are no particles, suddenly one particle appears, divides itself into several particles, they collide again and then disappear. There have been some scientists who have been willing to speculate that, beyond what can be observed even at the subatomic level, there must be some kind of energy field, some call it a quantum field, some call it a ground state, whatever they call it, but it has basically been proven by quantum physics, that there is some state beyond the physical material realm. And in that state there is energy. And that energy can then enter the material realm and become physical matter. If you take this and put it together with a big bang, you can see that, is it actually logical that all of the matter and all of the energy that is now in this huge universe was compressed into something called a singularity? Whatever that may be. Is this really logical? Obviously, all of the matchup could not fit in there. But could the energy actually fit into a single point? Is it not just as logical to say that there was an event where energy from a different realm entered the material frequency spectrum. And this means that all of the matter that you see in the world today is actually created from energy. This was proven by Einstein. And that energy must have come from somewhere, and what has now been proven for those who are willing to see it by quantum physics, is that that energy came from another realm. It entered the material world, the physical realm from another realm. Well, is that not free energy? Is it not thereby proven that the entire world is created by free energy? So does that not mean it is also possible that technology could be created, that would be able to, so to speak, channel the energy from a different realm into the material realm, where it could then be used to perform physical work or at least create electricity that could power machines that perform physical work. This is perfectly in line with what has already been discovered. See, what you have right now is, you have a state of technology, which is a reflection of the collective consciousness and the collective consciousness does not really fully accept the existence of another realm. That is why as we have said humankind has become a closed circle, a closed system subject to the second law of thermodynamics. That is why the technology you have today, the energy sources you have today, you think that the only way to provide energy is to either burn some kind of fuel, or split the atom, and free the energy that is already in the material realm. But this is simply a certain mindset that is based on an incomplete understanding of how the world works. As I said, quantum physics has already proven that the world is created by energy from another realm, and therefore, there is naturally much more energy in that realm and it is a matter of raising our view of the world, our understanding of the world, raising the collective consciousness until we can grasp what that other realm is like, and therefore be able to receive the technology that can make use of the energy that is there. It may be not so constructive to talk about free energy, but it is free in a sense that there is no cost, there is nothing that needs to be burned or consumed in the material realm in order to harness this energy and therefore, we might call it a different name and many different names could be suggested.
We has did this project in our school we got first prize we are so happy to do this project😊 our scl name is spring board techno school narasaraopet guntur district
Neat little experiment for a water wheel. But what I would like to see is this model running for 1 hour, which I doubt it could. The water suction will not work endlessly
@@yudelko wonder what size as a variable would actually play out as. Could potentially set up multiples on a single reservoir using energy from 3 to start 5, leaving 2 as low cost power generation. How viable who knows.
This looks cool. Where did you place the pump and powersource to pump up the water to the tank? The pump sucks in some air, you should keep higher water level in the lower tank.
@@Englishlearningisfun No it's not. If you don't trust me, build it on your own. Without a pump air would be pulled in from the outlet and all water will run down the rising pipe.
for anyone wondering if this really works, yes the water turbine works, BUT the water coming up through the pipe and back to the tank DOES NOT, ok maybe for a few seconds, but it wouldn't be able to flow like that consistently as that would make it like a perpetual motion machine, but that is impossible as it would violate the second law of thermodynamics.
I have an idea, what if you make it 2 different water output to a 2 wheel, and each one wheel moving 1 motor, so get total 2 motor, 1 motor give electricity to lamp, and another motor give electricity to a pump
That's perfect! A weird process of building, yet helpful after you get used to the idea of knowing every tool set and being able to apply it for it's intended use! Can't wait, some I would have to refuse because of the difficulty level and having spent to much time there! So this will help and get rid of trouble for either future part searching or having more complex parts within the system! Should be fun and interesting! Who would ever think of 1000$ plastic generators that are not plastic? The way the world has people thinking somtimes! We can miss out on amazing idea's of what can bring people affordable living! With that being said, no regrets on former builds! They all serve thier purpose! ❤
I give you the like because you didn't say "energy forever", the system lost water and the water can't return in the bottle as fast for keep this working.The rotation of the motor maybe not enough for a stable power without other components. I think you can upgrade the system for a better result.
@@LIFEGADGET Thx for reply. I can suggest ,for the moment two ideas: use a battery to stock energy, don't forget something like a diode to block the return to the motor, and put something for protect the lost of water, it's important.
Cheers for this, I have been researching "easiest way to generate electricity" for a while now, and I think this has helped. Ever heard of - Diyadison Penhloe Blaster - (search on google ) ? It is a smashing one off guide for generating your own electricity without the headache. Ive heard some decent things about it and my mate got great results with it.
Where did you get the motor? And what type is it? And the other yellow part, where do you get that? And the wires? Can you put a list of materials and where u get them?? Thanks!
Thank u for the project. I really want to make it. I have a question. What us the The yellow thing you used with the motor.? I couldnt find it in the shops.... Please reply sir
@@LIFEGADGET Sir, what is that circle thing which you have placed in pvc board something like magnet and the red wheel in which you have put the chopsticks is that wooden or it is also pvc board??
I love you videos sir....and I've tried all ur projects....and ive thought to make this one now...i just have 1 small question, which thread is that? A normal one?
Bro i need your help plz reply It is a generator or a motor because motor can't produce electrical energy If it is generator then how much watts and volts it is ?
It should be the same amount of water going out(u put 3 drinking straws) and going in (u put 1 drinking straw) in-short 25% flow in and 75% flow out so it will ran out of water a couple of a minute and it will stop, , anyway it a nice and very informative video, good job sir👍
Great creations for home decoration. The audience must be thinking, there must be energy to raise the water to the top, the booster pump is not shown here. It seems that Archimides' Law does not apply to this circulation.
Material List : PVC board Chop stick and bottle cap to make the wheel you can use other sticks. Plastic pipe to hold the tank. Plastic tank. 6v Motor Thread LED Light 3v
The video is right. Nothing wrong in that. But viewers please do not think that this gives energy forever. In this setup, the amount of water going up will be less than water flow out. Then this will die out in time. Remind that, if this work infinitely, that will be the violation of second law of thermodynamics. That will not happen.
This video explain not compleeted Should be separate during electic generator for electricity by gravity force this part is accept but another once it is impossible for suck the water ground state to the tank because aniti gravity force not enough for divide it. So please clarify before release any video... Thank
@@kimberlyvaldezmayor9393 simplest example for that density he is talking I'd give you is the ocean it looks so blue bcoz of large amount now go and hold some water from that ocean in your hand or a bucket it would not be blue bcoz of less amount
Hey , are the bearings necessary can't I just make the hole bigger than the stick holding it and rest the motor will do ( rotate it ) ... And can I use anything else in places of those bottle caps that's not looking nice , nd what did u use to pull water in upward direction ( mini dc motor )? ... Please answer as soon as possible . Thanks !
If bearings are there. Movement of wheel will be enhanced. Use of bottle tops will be much better, as it has required mass, and also it can carry small amount of water which can make it much heavier than any other thing. To pull the water up, no motor is used. It is happening on the principle of suction, when water starts droping It sucks the groud water ..... Simple
The outgoing water level is high than incoming water by suction, so eventually, it will get stopped within a few more seconds? or Please reupload full video at least run it upto 15 mins. Or Any physics teachers are watching this? Can you explain it is possible or not?
That's one point, there's more water dropping than getting to the top. The fact that in real life it will be much bigger, some external circumstances will be much significantly, the sun in some minutes will evaporated a big part of the water
Hey there, I m Taiyaba and I m a student and I m making the Device you've made and I have a question please tell me how exactly this works like how the energy converts.. Please tell me...
Is impossible to carry out big volume of water back to top. Thats y some model use generator to suck water back to top. And it done at noon where solar generate the motor to be suck up. However the system can only function with huge amount of water and only for short period since pressure will be equalize
Ok yall are confusing me....can I make this for my science project will it work i dont have to keep this device working for hours just some min. So will the whole process work or not?? Plz reply
The energy actually came from the human. He initially filled the elevated tank with water - potential energy. Once it runs, the tank is getting empty if you noticed. Negligible water is going up to replenish it. Then the man has to fill that tank again. It's not continuous without human intervention from time to time.
@@MrKockabilly The only reason that's accurate is because it's not enclosed. If it were sealed, the water would not be able to evaporate. As long as there are no air leaks in the system, the power source would be gravity (in the form of suction).
In my project of water wheel (I've done same like this) the process of water suction is not working and I don't know why. Something which I've changed are the jar (I've taken jar with more length and less breadth) and the straw (I've attached longer side of the straw with the jar and shorter side of the straw facing down). Are there problem with these two that's why the process of water suction is not working in my project ?
Okay Thank you..... And 1 last thing... Which yellow colour thing have you attached to the motor....? Nd can i use any thread for the step after that???
5:00 So much loss of water from base tank, and you can clearly see that the upper tank Input pipe has very low water input capacity, so if it does in reality then also it will not last long the power output. Or power may come in short intervals. Or stop for permanence after a run.
Bro water is not going to tank which is in the up. Pls tell what to do should we put a water pump or what to do . It's important only 1 day left for exhibition
Система имеет право на жизнь, но видео - обман. Полагаю, что закачка воды в бак в данном случае реализована либо скрытым насосом, либо скрытой от зрителя емкостью с водой (сообщающийся сосуд). Попытка повторить прибор показала, что после того как из короткого носика выходит порция воды, создаваемое разрежение в танке через этот же носик всасывает порцию воздуха. Потому такой ровный поток - обман. Однако если танк будет идеально герметичный, а на носик будет одет длинный шланг, конец которого будет НИЖЕ заборной емкости и при условии нахождения конца шланга в воде, то да, заборный шланг будет качать воду в танк. Но это обычный перепад высот, обычный ниспадающий поток, который проще реализовать на реке запрудой.
@@kanjo-Etienne if you can understand what's worm gear!?all kind of engineers they using their background,but most of them they got only one background in engineering,Gera engine is make more power putting it together with other engines and bigger wheel can make great speed to power;!
Free energy does exist 1st law of thermo dynamics energy cannot be created nor destroyed so maybe you're reffering to a energy converter because it converts mechanical energy from the flow of water to electrical energy by spinning the hydrowheel which spins the motor (idk what type) then converting mechanical energy to electrical energy.
ua-cam.com/video/crgvbv-cm4A/v-deo.html The sun also produces FREE ENERGY , EARTH REVOLVES AROUND THE SUN = FREE ENERGY !!! (1st law of THERMO DYNAMICS was proven to be slightly wrong actually --- matter can be destroyed)
No don,t make. There are some problems to solve wait for our next video. We need to change the plastic water tank and some other stuffs to solve the problem.
It doesn't matter, because if we make it on a large scale we will obviously take care of these things before and this small project is only for demonstration
Good point but it's the concept that's the interesting part. Obviously you can make a bigger drip pan to catch the spillage and also a climate controlled area might work. I've thought about this same concept but with a hill and man made swell and downhill stream like how they do with off the grid water pressure
@LIFE GADGET I'll bet to you 100% this water force can't make even 0.2 voltage... Take Multimeter and measure in motor terminal and show us.. then we'll believe... 💯% fake... Unsubscribing you .. don't think viewers are fool ok..
This is by far the most legitimate one I have seen.
Thank you ...... please share this video...
Esto me sorprendió son los mejores creadores de proyectos. su canal youtube es el mejor de todos FELICIDADES Y GRACIAS
GUAU
Muchas gracias. Suscríbete y comparte este video ...
I THOUGHT OF MAKING A ENERGY GENERATOR BUT THIS MODEL IS A MIRACLE FOR MY SCHOOL PROJECT
Today our 1 lakh subscriber has been completed sir because of you. ❤️
That's really great..... Best of luck
Very Unique and Nice Idea Bro...Keep it Up👍👍👍
Thank you so much 😀
I made this project after watching your video. Thank you for this video😊
Most welcome 😊
Hoo bro mujhe aapse baat karna hai kaise kare?
Is it working????
Is it working????
Está muy bueno, el único problema es que, el caudal de agua que sube al tanque es menor al que baja. Por ende en 5 min el tanque se descarga. Fin del movimiento..
Sí, tiene usted razón . Estamos trabajando en ello......
@@LIFEGADGET puede cimprar un dinamo de bicicletas y una bomba de agua para que el agua haga trabajar al dinamo y el dinamo a la bomba y ya seria una coordinación del agua al dinamo y del dinamo a la bomba del agua
Realmente aprecio tu idea. Gracias hombre
Can u plz tell us what materials are used to make this? It is very important for me
In description
That project was real and that was a very useful project for everyone
Is the air suction automatic?
hi. i also have this project. but mine was not working :(
you slightly open the jar cap to enter the air.... this is a reason why the jar almost already half before the suction of water begin... but without entering air from cap the water can't flow outside the container.... because of the limited pressure can take from small hose
Does this really work
@@yagyasingh765 No
In order for certain new technology to be expressed, or to be released, there has to be a willingness to receive it. And this requires both the change in the collective consciousness but it also requires that there are certain scientists who are willing to question what most scientists are currently not questioning, including materialism. Now, just as a concrete example here, you have the whole concept of free energy. This can be explained actually in terms of what is currently known by quantum physics. You have observations made by quantum physicists in bubble chambers, that you can have a state where there are no particles, suddenly one particle appears, divides itself into several particles, they collide again and then disappear. There have been some scientists who have been willing to speculate that, beyond what can be observed even at the subatomic level, there must be some kind of energy field, some call it a quantum field, some call it a ground state, whatever they call it, but it has basically been proven by quantum physics, that there is some state beyond the physical material realm. And in that state there is energy. And that energy can then enter the material realm and become physical matter. If you take this and put it together with a big bang, you can see that, is it actually logical that all of the matter and all of the energy that is now in this huge universe was compressed into something called a singularity? Whatever that may be. Is this really logical? Obviously, all of the matchup could not fit in there. But could the energy actually fit into a single point? Is it not just as logical to say that there was an event where energy from a different realm entered the material frequency spectrum. And this means that all of the matter that you see in the world today is actually created from energy. This was proven by Einstein. And that energy must have come from somewhere, and what has now been proven for those who are willing to see it by quantum physics, is that that energy came from another realm. It entered the material world, the physical realm from another realm. Well, is that not free energy? Is it not thereby proven that the entire world is created by free energy? So does that not mean it is also possible that technology could be created, that would be able to, so to speak, channel the energy from a different realm into the material realm, where it could then be used to perform physical work or at least create electricity that could power machines that perform physical work. This is perfectly in line with what has already been discovered. See, what you have right now is, you have a state of technology, which is a reflection of the collective consciousness and the collective consciousness does not really fully accept the existence of another realm. That is why as we have said humankind has become a closed circle, a closed system subject to the second law of thermodynamics. That is why the technology you have today, the energy sources you have today, you think that the only way to provide energy is to either burn some kind of fuel, or split the atom, and free the energy that is already in the material realm. But this is simply a certain mindset that is based on an incomplete understanding of how the world works. As I said, quantum physics has already proven that the world is created by energy from another realm, and therefore, there is naturally much more energy in that realm and it is a matter of raising our view of the world, our understanding of the world, raising the collective consciousness until we can grasp what that other realm is like, and therefore be able to receive the technology that can make use of the energy that is there. It may be not so constructive to talk about free energy, but it is free in a sense that there is no cost, there is nothing that needs to be burned or consumed in the material realm in order to harness this energy and therefore, we might call it a different name and many different names could be suggested.
Thank you..
Honey, this is pure hydraulics.
Woowwwwwww
Am
Bro humiliated the channel ☠️💀
We has did this project in our school we got first prize we are so happy to do this project😊 our scl name is spring board techno school narasaraopet guntur district
I can now sleep with light through out the night, thanks it work
thanks you.. please subscribe my channel.
How?! ... It doesn't work with me
how??
@@satishchinna09 can you pay me to tell you how I did mile?
@@truly821 no scammer f you i know youre working with the people who make this for money and you will just scam us f you
Neat little experiment for a water wheel.
But what I would like to see is this model running for 1 hour, which I doubt it could. The water suction will not work endlessly
supplying the water suction with solar panel ,electric motor and some system that can avoid water to evaporate
@@yudelko wonder what size as a variable would actually play out as. Could potentially set up multiples on a single reservoir using energy from 3 to start 5, leaving 2 as low cost power generation.
How viable who knows.
@@yudelko why don't you use solar energy directly to get electricity istead
This looks cool. Where did you place the pump and powersource to pump up the water to the tank?
The pump sucks in some air, you should keep higher water level in the lower tank.
Water is going up with air pressure not any pump
@@Englishlearningisfun No it's not. If you don't trust me, build it on your own. Without a pump air would be pulled in from the outlet and all water will run down the rising pipe.
I will try
@@michaegi4717 does that 12v motor really generate energy?
@@tejassharma8639 Maybe, but for sure by far less than the energy needed to pump up the water.
for anyone wondering if this really works, yes the water turbine works, BUT the water coming up through the pipe and back to the tank DOES NOT, ok maybe for a few seconds, but it wouldn't be able to flow like that consistently as that would make it like a perpetual motion machine, but that is impossible as it would violate the second law of thermodynamics.
Yes it's not free energy but it works to some extent
Law are there to be broken...at least partially
I didn't get your point perfectly😅... Can you please explain.
what should i explain sweetheart
I have an idea, what if you make it 2 different water output to a 2 wheel, and each one wheel moving 1 motor, so get total 2 motor, 1 motor give electricity to lamp, and another motor give electricity to a pump
that's really great......
That's perfect! A weird process of building, yet helpful after you get used to the idea of knowing every tool set and being able to apply it for it's intended use! Can't wait, some I would have to refuse because of the difficulty level and having spent to much time there! So this will help and get rid of trouble for either future part searching or having more complex parts within the system! Should be fun and interesting! Who would ever think of 1000$ plastic generators that are not plastic? The way the world has people thinking somtimes! We can miss out on amazing idea's of what can bring people affordable living! With that being said, no regrets on former builds! They all serve thier purpose! ❤
I give you the like because you didn't say "energy forever", the system lost water and the water can't return in the bottle as fast for keep this working.The rotation of the motor maybe not enough for a stable power without other components. I think you can upgrade the system for a better result.
we are working on it...... If you have any idea to improvise this project please share with us.. :)
@@LIFEGADGET Thx for reply. I can suggest ,for the moment two ideas: use a battery to stock energy, don't forget something like a diode to block the return to the motor, and put something for protect the lost of water, it's important.
@@Serafin98 You are great.. really appreciate that. We will try to improvise :)
Cheers for this, I have been researching "easiest way to generate electricity" for a while now, and I think this has helped. Ever heard of - Diyadison Penhloe Blaster - (search on google ) ? It is a smashing one off guide for generating your own electricity without the headache. Ive heard some decent things about it and my mate got great results with it.
ua-cam.com/video/K49QOM_B8dA/v-deo.html combined with this it might work?
Legends are here for their summer vocations project 😂
same where can i find the 12 volt motor?
Same
No ,we are here for science exhibition....for bunking the classes and to roam in numaish with our classmates 😂
@@MOTIVATIONGURUJI23same bro
Vacation ❌ Vocation ✅ 😂😂
I will definitely use this for my Physical Science project! Thanks!
Go for it!
same
Is this work property
Where did you get the motor? And what type is it? And the other yellow part, where do you get that? And the wires? Can you put a list of materials and where u get them?? Thanks!
it is 50 rupees in mumbai
Howzz the transparent pipe pumping water from surface to upper tank? Are you using any pump to pump the water?
DOES NOT WORK!!! BLOODY CHEATER!!!
Thank u for the project. I really want to make it. I have a question. What us the The yellow thing you used with the motor.? I couldnt find it in the shops.... Please reply sir
Which one?
@@LIFEGADGET Sir, what is that circle thing which you have placed in pvc board something like magnet and the red wheel in which you have put the chopsticks is that wooden or it is also pvc board??
I love you videos sir....and I've tried all ur projects....and ive thought to make this one now...i just have 1 small question, which thread is that? A normal one?
which has good grip.
What is used in between the wheel
Bro i need your help plz reply
It is a generator or a motor because motor can't produce electrical energy
If it is generator then how much watts and volts it is ?
This is no 1 project ever I got 1 rank on my school in science fair
Really appreciate that... Try to improvise the project.+
plese tell me that what you had used on the motor that yellow one
plese reply
Mam not motor that's is dinomo and yellow colour substance is Pulley
It should be the same amount of water going out(u put 3 drinking straws) and going in (u put 1 drinking straw) in-short 25% flow in and 75% flow out so it will ran out of water a couple of a minute and it will stop, , anyway it a nice and very informative video, good job sir👍
Thank you very much sir.
Sir I want to produce electricity through tunnels... Guide me
а какже вакум?
Great creations for home decoration. The audience must be thinking, there must be energy to raise the water to the top, the booster pump is not shown here. It seems that Archimides' Law does not apply to this circulation.
Only you with your comment understand about energy conservation
Sir what material you are using for the base that is red color and where can I found it please tell me as 1 have to submit it 4 days after
It’s most likely foam board.
What kind of solution did you use, because water just literaly sunctioned air from the dripper so it is hard to reflow the water up to the container?
This project of solution is FREE ELECTRICITY FROM WATER
Please can you tell me what is that red thing you used I think it's not s cardboard bcz it is not safe with water * what was that red thing? *
Current flows when speed of motor is more than it's synchronous speed.
what does it mean
Material List :
PVC board
Chop stick and bottle cap to make the wheel you can use other sticks.
Plastic pipe to hold the tank.
Plastic tank.
6v Motor
Thread
LED Light 3v
ok
ap is ka material kya kya hai bhej do ap
Where I can find this material online?
Thanks for telling the metarials ✌️
Thanks bhaiya ❤❤
how long does it last though? hope to see a time lapse for these thing
You actually add a timer and another engine kicking while the first one rest.
The video is right. Nothing wrong in that. But viewers please do not think that this gives energy forever.
In this setup, the amount of water going up will be less than water flow out. Then this will die out in time.
Remind that, if this work infinitely, that will be the violation of second law of thermodynamics. That will not happen.
What is second low of termosdinamic? That law can't be changed, over run?
@@borivojetravica569 that says entropy of universe always increasing
Output n input never equal, so it doesn’t work
Arif, same thing I said.
This video explain not compleeted
Should be separate during electic generator for electricity by gravity force this part is accept but another once it is impossible for suck the water ground state to the tank because aniti gravity force not enough for divide it.
So please clarify before release any video...
Thank
A miracle!
The water at the base is blue. The rising water is colorless!
Miracle, it could be "wine" ? ...
Miracle... the maker is aladin
@@CREATIONTUBE may I know the explaination about the density of water in this matter? Thank you
@@kimberlyvaldezmayor9393 simplest example for that density he is talking I'd give you is the ocean it looks so blue bcoz of large amount now go and hold some water from that ocean in your hand or a bucket it would not be blue bcoz of less amount
Can't the cartwheel spin without the magnets you used in 1:46 minutes?What are their names?Could you please reply soon
Its Bearing u can get it on wastage shops for like 10 20 ₹
Where do I find that 6v motor you used? | BTW very cool creation
its 12v and u can find them anywhere, i recommend online stores
sup
Hey , are the bearings necessary can't I just make the hole bigger than the stick holding it and rest the motor will do ( rotate it ) ... And can I use anything else in places of those bottle caps that's not looking nice , nd what did u use to pull water in upward direction ( mini dc motor )? ... Please answer as soon as possible .
Thanks !
If bearings are there. Movement of wheel will be enhanced.
Use of bottle tops will be much better, as it has required mass, and also it can carry small amount of water which can make it much heavier than any other thing.
To pull the water up, no motor is used. It is happening on the principle of suction, when water starts droping
It sucks the groud water .....
Simple
What is that yellow thing that u put it on the motor pls I have project
i've trying to make it. but why the water is stuck in the bottle?
they didn't stream down? please explain it.
Don't put the suction pipe in water when starting time. It needs breathing .. so only the water strucked in the bottle
Use a glass bottle or steel bottle.
That's cray exprement. Wow I like this.
Nice work but how is going to the water up there ?
Kelum. Dont ask him. Let him enjoy his discovery
@Martin Bittner maybe you "re correct .not free energy device..
Its is becoz of air 😏😏
@Martin Bittner try this - ua-cam.com/video/5HBnK6vjErk/v-deo.html
@Martin Bittner 05:07 the LED Light.
The outgoing water level is high than incoming water by suction, so eventually, it will get stopped within a few more seconds? or Please reupload full video at least run it upto 15 mins. Or Any physics teachers are watching this? Can you explain it is possible or not?
That's one point, there's more water dropping than getting to the top. The fact that in real life it will be much bigger, some external circumstances will be much significantly, the sun in some minutes will evaporated a big part of the water
No according to the law of conservation of energy its inpossible
It,s not possible
Totally wasted of time
According to the Pythagoras cup principles this is possible
Is the red colored thing wood ???
Which is used to make
Pls repky fast for i hv yo make project
PVC board.
@@LIFEGADGET thankyou for idea
We even won 2nd prize in exhibition
Please you can tell me how the water is coming up in the pot without any energy?
air suction
JAYANTA KUMAR BASAK it's called magic✨🧙🏼♀️🧛🏼♂️
Thanks
Focus on the tank the water is slowly going down before its fully refill from lower water
It's called HOAX
I have a doubt that
due. to rotating of that wheel does electicity runs ??
Yes
What is the name of the object in 1:44
is totally infinite?, or at some point it slows down? thanks, good video.
no it will stop... we are working on it
@@LIFEGADGET oh, thanks!
@@LIFEGADGET You need to use a pipe un the outcoming water hose, so it 'burps' the incoming air.
Bro this is soo epic I will make this for my school exhibition but it's made up of quite expensive materials 😅😅
Yes like PVC board
I don't have this...
What is the yellow thing that you attached to the 6v motor
2:04 what are those circles
???
ball bearings
Beering
Hey there, I m Taiyaba and I m a student and I m making the Device you've made and I have a question please tell me how exactly this works like how the energy converts.. Please tell me...
Sir can u plz tell me where can we get the motor which u used near the turbine to generate electricity as locally it's not available........
🎉yes
Is impossible to carry out big volume of water back to top. Thats y some model use generator to suck water back to top. And it done at noon where solar generate the motor to be suck up. However the system can only function with huge amount of water and only for short period since pressure will be equalize
shut up nerd
Ok yall are confusing me....can I make this for my science project will it work i dont have to keep this device working for hours just some min. So will the whole process work or not??
Plz reply
The most important thing in this project is to hide the water pump 🤫
😁😁😁
The energy actually came from the human. He initially filled the elevated tank with water - potential energy. Once it runs, the tank is getting empty if you noticed. Negligible water is going up to replenish it. Then the man has to fill that tank again. It's not continuous without human intervention from time to time.
😅😄😂😂😂😂😂
@@MrKockabilly The only reason that's accurate is because it's not enclosed. If it were sealed, the water would not be able to evaporate. As long as there are no air leaks in the system, the power source would be gravity (in the form of suction).
In my project of water wheel (I've done same like this) the process of water suction is not working and I don't know why. Something which I've changed are the jar (I've taken jar with more length and less breadth) and the straw (I've attached longer side of the straw with the jar and shorter side of the straw facing down). Are there problem with these two that's why the process of water suction is not working in my project ?
What kind of Jar did you use? Did you make proper air tight?
Use a battery hidden inside like he did. Then everything will work...
Yeah bro..
You're right water suction system does not work..
Hi sir, i love your videos... Just a small help needed... What screw like thing u have used in the video for the wheel?
penium.
Okay Thank you..... And 1 last thing... Which yellow colour thing have you attached to the motor....? Nd can i use any thread for the step after that???
it can be anything but the thread wants to fit in it
Sir pls can u mention the materials required this project is for science exhibition in college pls sir
dumbass check the description
And also he is not shown the hidden connection of secondary pipe line. I mean the inlet pipe...
Yes
I think it's fake
Can I use 9v motor will it generate electricity
Can you tell me that which device you used for converting hydro into electrical energy❤
A small generator motor dude,it converts mechanical energy to electrical power
Good job ! What are the names of the song ? They are so beautiful.
search rhamzan days youtube channel
@@LIFEGADGET name pls?
Sir what we say the round thing to set chopsticks in it
I have try this in science exhibition and I got 3rd price
really happy for you brother........ 🙂
Which model got 1st prize ???
Can you please tell me what materials you used by name I have to buy but I doesn't know their names 😢😢😢😢
How to doing its pls explain details iam trying everyday didn't get pls tell me bro
PVC board Kahan se Mila kaun si shop per milta hai
Can we use simple rotar machine of Rs10
Please reply
Three elements of success of free energy "Crazy music", "Termoglue", and "Wheels"
Which water do you use
Is that thermacol or cardboard piece which you have used under the pipe ( that red thing ) ?? I want to make this so ..
PVC
Thank you so much this is a great idea💡
5:00 So much loss of water from base tank, and you can clearly see that the upper tank Input pipe has very low water input capacity, so if it does in reality then also it will not last long the power output. Or power may come in short intervals. Or stop for permanence after a run.
Bro water is not going to tank which is in the up. Pls tell what to do should we put a water pump or what to do . It's important only 1 day left for exhibition
Система имеет право на жизнь, но видео - обман. Полагаю, что закачка воды в бак в данном случае реализована либо скрытым насосом, либо скрытой от зрителя емкостью с водой (сообщающийся сосуд). Попытка повторить прибор показала, что после того как из короткого носика выходит порция воды, создаваемое разрежение в танке через этот же носик всасывает порцию воздуха. Потому такой ровный поток - обман. Однако если танк будет идеально герметичный, а на носик будет одет длинный шланг, конец которого будет НИЖЕ заборной емкости и при условии нахождения конца шланга в воде, то да, заборный шланг будет качать воду в танк. Но это обычный перепад высот, обычный ниспадающий поток, который проще реализовать на реке запрудой.
Can I use it as a science project ? Plz reply and wonderful work ...😊
No dear, you can’t. This is fake. Just think being cool and you will know that water can’t be sucked up.
Don’t care about that guy, it works
Please tell me that how did u connect the light to the windmill. It is really important for me. Day after tomorrow is my science exhibition
0:01 That's awesome now put worm gear engine and water pump instead to power straight on it will power other bigger engines;!even all your village;!
Thank you.
What? Even a village? Kindly explain what you mean by worm gear engine
@@kanjo-Etienne if you can understand what's worm gear!?all kind of engineers they using their background,but most of them they got only one background in engineering,Gera engine is make more power putting it together with other engines and bigger wheel can make great speed to power;!
Which material is used for making wheel and pinion
opp vidoebhai kam ayaa school me kam aaya bro op !!! bhai thx !
Free energy does exist 1st law of thermo dynamics energy cannot be created nor destroyed so maybe you're reffering to a energy converter because it converts mechanical energy from the flow of water to electrical energy by spinning the hydrowheel which spins the motor (idk what type) then converting mechanical energy to electrical energy.
Wow sir I am surprised.....
Plz read 2 law
ua-cam.com/video/BZZrDace_h0/v-deo.html
ua-cam.com/video/crgvbv-cm4A/v-deo.html
The sun also produces FREE ENERGY , EARTH REVOLVES AROUND THE SUN = FREE ENERGY !!!
(1st law of THERMO DYNAMICS was proven to be slightly wrong actually --- matter can be destroyed)
But no device can operate over 100% so in the end your output is less than your input and therefore you can’t just make extra energy out of nothing
Plz be honest ..
It will work or not properly.I want to make it for school project
No don,t make. There are some problems to solve wait for our next video. We need to change the plastic water tank and some other stuffs to solve the problem.
Reply toh kro
It will work or not
@@fashiontrendz8422 it will work. but let me solve the problem first.
It's Not working the well not go out
It's fake there is a mini fuel pump inside
I want to ask that.....
Why you didn't show the rest of the part like house and the connections?
More spillage of water + evaporation, in the long run,the tank, will "run out" of water and the system failed.
It doesn't matter, because if we make it on a large scale we will obviously take care of these things before and this small project is only for demonstration
Just appreciate the thing.. It's a model and it works... And obviously issues will arrive and will also be taken care of if needed,
Good point but it's the concept that's the interesting part. Obviously you can make a bigger drip pan to catch the spillage and also a climate controlled area might work. I've thought about this same concept but with a hill and man made swell and downhill stream like how they do with off the grid water pressure
Never we can get free energy . Dont forget LAFWAZY
I made same this system 12 years ago but not working ( cavitation phenomenon)
@@fadi-es6cf I am confused. Why can't we get free energy? This guy's work is proof, continuous motion, continuous energy
Why The water level in tank is not constant......
Well try ...but it's worthless
@LIFE GADGET I'll bet to you 100% this water force can't make even 0.2 voltage... Take Multimeter and measure in motor terminal and show us.. then we'll believe... 💯% fake... Unsubscribing you .. don't think viewers are fool ok..
Sir esme motor kitne watt ki lgana hai mai to Sikh gya bnane ko per motor kitne watt ka lagega
Sir please bta do please sir
That is revolutionary!
Bro can tell me what will be the approximate expenses for this project?
1000
PVC board per vo gol round sa hai ya kya hai iska name
the out is must bigger than the in ?
How the water will going up
I too did same.. but suction not happening..
2:00 what is the name of this glue u used in this video pls tell sir
Sir can you please provide the written details of working and construction of this model please 🙏
Lol I am Joking Hahaa
Hey...I did the project just as shown it's still nt working....help please😅
I also tried. It's not working
What are the material required for making this please send me quickly
👌 super brother 💙 ❤ 🙌 🙏 💪 👏 💙 ❤ 🙌 🙏 💪 👏 💙
How the lights glown .you didn't showed how to connect light
Simply connect the light to motor terminal.
Plz tell the names of all the things needed for this model
Sir where u got the red color circular attached for wheel. Pls reply. Robotics project. Can buy these things from amazon ahh sir.
Its a pvc board.... easy to cut and shape.