@@FRJohnny777 what are the sizes for the ones on the fairings? Couldn’t figure that out. Or like how do u even know which ones cause this website is pretty confusing ngl cause our bike year is not on there
I had to use an older model. Most if not all of the bolt sizes are the same as the only changes for this new model was the actual design of the plastics. I bout a bolt measure gauge that they sell, and I measure and order from there, but their fairing kit or engine kit will work from my experience. It’s best you reach out to them for more direct answers
There is a dedicated brake wire from the xk glow module that taps into the OEM brake wire. Just follow the instructions on the xk glow kit and you’ll be fine 👍
I’m 5’8 and I have to slight tip toe, but I have a short inseam. If I one foot it with one foot on the ground, one on the opposite peg I have no issues.
Me in my 30s around riding for 40 mins starts in wear on my neck and wrists. zx636 2018 has low bars, so maybe a bar converter would fix this problem. if you're looking to get one
I have a 13 zx6r I highly recommend a GPR steering damper word can't explain the upgrade in handling my front valve stem blew at 122 mph had the GPR I SWEAR it save my life best of riding to you
The purple hex bolts are a huge no. They stick out in a bad way, just saying. Where did u get the smoked out flashers though and was it hard to install? Oh yeah this is my second page, check me out at THAT915GUY TO SEE MY UPGRADES IF UD LIKE
I got a m4gp slip on, no integrated tailights yet, but I did replace the diving board with a dmp fender eliminator kit. Somewhere along the way I disabled my horn, so I’ll have to figure that out for future inspection (until then I’m happy with rev bombing someone if I have to) got a puig smoked out windscreen, about to get frame sliders and spools, then I’m going to get a tune, and go smaller sprockets. Idc if my top speed bumps down to 155, that front wheel is going to be a fight to keep down, and I’m gonna love it.
Interesting. I have the same year and model bike, and since I bought it, I have been eyeing all the exact same aftermarket stuff. Coincidence? Or do all great minds just think alike? It's good to see what my bike will look like when I'm done, before I even bought the stuff. So thank you.
Did you do anything about the tuning? Removing the throttle table and timing restrictions that Kawi has in there from the factory? I know that most Euro4 and especially the Euro5 bikes are really picky about exhaust changes and things like that, and it doesn't take much to cause a lean condition...
Wasn’t to concerned about it with it just being a slip on. Never noticed the bike act up or run any different. 4000 miles later still pulling strong. Should it be done, absolutely. Was it a priority, no
@@FRJohnny777 I ask because my buddy has a 2016 and he put on a slipon, forget which one, and he had a really lean flat spot down low where the exhaust valve would normally be doing it's thing...
I too bought a ram mount for my 2019 ZX6R, but the universal fork stem mount didn’t work at all. How did you get yours to work? Badass scheme man. Looks sick as hell.
@@FRJohnny777 I did not realize that your generation ZX6R 2019 and up came with factory hazard lights. Thats why I asked because the previous generation which my 2017 ZX6R is a part of, does not come with factory hazards lights. You did not have to be a sarcastic ass about it. Good luck with your channel buddy. Don't be a prick God don't like ugly.
It’s unfortunate that you feel the need to put me down when you’re under the impression that I was being sarcastic. It’s not my fault that you interpreted my reply in that context but the way you reacted and replied is your fault. I apologize that the reply gave off that impression but that was not the presentation of that message. I will take note of not putting a light hearted wink emoji when it comes to replying to comments.
Love seeing how others mod the same bike I ride, nice scheme brotha. Ride safe ✌🏽
Man I wanna get those headlights you have so bad man, they’re so sick!
No radiator guard, frame slider,axle slider ,engine covers etc?? Why?
Those don’t seem to be top modifications or the first thing I’d buy for this bike 🤷♂️
Beautiful bike
Does it come with rear seat? In india it dont come with e rear seat.
I have the same bike and I’m looking for graphic/decals to put on my bike. Where did you get yours from ?
Got a twin but mine is only performance. lol mine looks terrible.
What a clapped out zx6r 😂 did you put any actual performance mods on this bike?
Just about 50 banshees in it to make sure it doesn’t get outrun by a gsxr
Hermosa ZX6R
This thing is beautiful. Really amazing man.
Bruh please tell me where you got the bolts I can’t find them anywhere
Pro bolt 😃
@@FRJohnny777 just checked em out, oh well I’ll wait till I can afford them😂
You can get aluminum or stainless steel. titanium is expensive lol
@@FRJohnny777 what are the sizes for the ones on the fairings? Couldn’t figure that out. Or like how do u even know which ones cause this website is pretty confusing ngl cause our bike year is not on there
I had to use an older model. Most if not all of the bolt sizes are the same as the only changes for this new model was the actual design of the plastics. I bout a bolt measure gauge that they sell, and I measure and order from there, but their fairing kit or engine kit will work from my experience. It’s best you reach out to them for more direct answers
So the 20hp sticker mods!
Gotta have em!
That looks fucking mint!
Much appreciated!!!
Where did you get that green fuel vent hose from?
eBay.
How did you hook up tst Integrated tail light and xk glow to make them work together? I want to do mine
There is a dedicated brake wire from the xk glow module that taps into the OEM brake wire. Just follow the instructions on the xk glow kit and you’ll be fine 👍
👀Looks Awesome!
Thanks for those videos, I'm thinking of getting this bike.
How tall are you ?
I'm 5'7, will that be a issue ?
I’m 5’8 and I have to slight tip toe, but I have a short inseam. If I one foot it with one foot on the ground, one on the opposite peg I have no issues.
I recommend getting the it, it is so much fun and handles great
Nice mod bro.
What hose did you use for the res delete and master cylinder?
It’s tubing used from a rear brake reservoir kit from HRC racing
where can I find a sticker kit like this? I have the same exact bike as you.
I got this kit custom made from drippin wet. He does all the moto America bikes
@@FRJohnny777 also where can i find colored screws like the ones you have?
Probolt USA
God bless you
Rear brake reservoir delete is stupid imo
Don’t know what you’re missing 🤷♂️
Hi
Hello
You sound like chase on two wheels. Must be a Georgia thing. Sick bike btw
not the first time i've heard this lol. I reckon so.
ZX-6R. Good Bike.
Replacing the stock exhaust is the first thing in my opinion. I did everything else after that.
Tst nexus front signals look way better
Unfortunately I sold this bike before they came out. I’d get those in a heart beat
Change the stock windscreen!
Looks real good. I have the 2018 KRT and love doing little personal touches.
Heck yeah man, the KRT scheme is awesome to add little details to
hello I would like to know the stickers can I buy them or thank you
Cool mods! quick question: how long does it take you on the zx6r until you start to feel back pain (or wrist pain, whatever comes first) ? Thanks!
Me in my 30s around riding for 40 mins starts in wear on my neck and wrists. zx636 2018 has low bars, so maybe a bar converter would fix this problem. if you're looking to get one
I have a 13 zx6r I highly recommend a GPR steering damper word can't explain the upgrade in handling my front valve stem blew at 122 mph had the GPR I SWEAR it save my life best of riding to you
i saw the smoke led blinkers on ebay but i dont know if it fit and work on zx6r or not
The purple hex bolts are a huge no. They stick out in a bad way, just saying. Where did u get the smoked out flashers though and was it hard to install? Oh yeah this is my second page, check me out at THAT915GUY TO SEE MY UPGRADES IF UD LIKE
Got em off eBay. Seemed to be used but it was a hard find for me regardless
Where did you get the carbon up front
Nicc
Dope!! Green chain
You wanted the clean look but look at all those stickers!
To me WSBK replica/graphics are clean. To each their own 👍
Song ???
Hey bud love the bike. Quick question is that a carbon fiber swing arm cover. and if so where could I find it looks awesome 👌.
It’s just a decal I had custom made with the sponsors information 👍
@@FRJohnny777 ok cool,.looks great
Where did you get the purple colored bolt set from? Looks really good
Probolt USA
@FRJohnny can you help with the graphics kit? really would like it or similar for my 2021 636.
Lol my guy did everything to make the bike look sexy but nothing for the safety..a steering stabilizer is a must add accessory for the 636.
Sure, maybe for those who can't ride 😏
@@FRJohnny777 fate is nobody's friend, my friend. Please be safe♥️
Where did you get the tinted blinkers?
ebay sir.
Did you have to get a tuner after the pipe ? I got the 2020. And ordered the hot bodies slip on .
I got a m4gp slip on, no integrated tailights yet, but I did replace the diving board with a dmp fender eliminator kit. Somewhere along the way I disabled my horn, so I’ll have to figure that out for future inspection (until then I’m happy with rev bombing someone if I have to) got a puig smoked out windscreen, about to get frame sliders and spools, then I’m going to get a tune, and go smaller sprockets. Idc if my top speed bumps down to 155, that front wheel is going to be a fight to keep down, and I’m gonna love it.
How did u install pillon left foot pegs , as zx6r is not comming with that ...please guide
Do you mean for the passenger pegs?
@@FRJohnny777 yes , cause here in India we have only right sided passenger foot peg, nothing present at the left side not even slot.
where did you get the coloured fairing bolts? I'm in the UK and cant find these anywhere....
where did you get your purple bolts?
probolt usa
Where did you got the purple bolts?
Pro bolt USA
I went with the integrated TST tail light with the tucked plate which looks better than the table tag plate U have
Just bought this same bike. One question though. What kind of phone mount do you have and how do you have it mounted?
Where did you get the green hose for the reservoir delete kit...or one that come with green hose i cant find it
Interesting. I have the same year and model bike, and since I bought it, I have been eyeing all the exact same aftermarket stuff. Coincidence? Or do all great minds just think alike? It's good to see what my bike will look like when I'm done, before I even bought the stuff. So thank you.
Anything to help a friend lol
i actually like the purple hardware. do those come with a light weight battery? if not get one
Just got this same bike and I see you're in GA! Lets link and ride!
When did u get the carbon fiber swingarm sticker?
I got it with the graphics kit
Do you think you can post the link for that brother?
What do you use for a liscense plate light bro??
Did you do anything about the tuning? Removing the throttle table and timing restrictions that Kawi has in there from the factory? I know that most Euro4 and especially the Euro5 bikes are really picky about exhaust changes and things like that, and it doesn't take much to cause a lean condition...
Wasn’t to concerned about it with it just being a slip on. Never noticed the bike act up or run any different. 4000 miles later still pulling strong. Should it be done, absolutely. Was it a priority, no
@@FRJohnny777 I ask because my buddy has a 2016 and he put on a slipon, forget which one, and he had a really lean flat spot down low where the exhaust valve would normally be doing it's thing...
Main modification of this bike is back cowl seat...
hey brother nice bike, where did you buy the decal set kit ? thanks
Rear break Reservoir Hose ? Where?
Thank you for providing links 👌
My dream motorcycle. 🔥🔥🔥🔥🔥
I too bought a ram mount for my 2019 ZX6R, but the universal fork stem mount didn’t work at all. How did you get yours to work? Badass scheme man. Looks sick as hell.
I literally hammered it down in to the fork hole, they make a metal insert by kawi moto
I have the white stripes on my back wheel your the only bike I’ve seen with them 😎
Eyyyy 👊😎
Where did you get the turn signals or did you use tint wrap? Good looking bike.
eBay
Which fender eliminator kit did you use with the xk glow tail light
The tst industries fender eliminator kit
wassup, where did you get those wheel stickers from?
From spinning stickers
How did you make your turn signal blinkers flash together as hazards? Please let me know and maybe make a video if not done already. Thanks Bud
I pressed the hazard button 😉
@@FRJohnny777 I did not realize that your generation ZX6R 2019 and up came with factory hazard lights. Thats why I asked because the previous generation which my 2017 ZX6R is a part of, does not come with factory hazards lights. You did not have to be a sarcastic ass about it. Good luck with your channel buddy. Don't be a prick God don't like ugly.
It’s unfortunate that you feel the need to put me down when you’re under the impression that I was being sarcastic. It’s not my fault that you interpreted my reply in that context but the way you reacted and replied is your fault. I apologize that the reply gave off that impression but that was not the presentation of that message. I will take note of not putting a light hearted wink emoji when it comes to replying to comments.
สะอาด เรียบร้อยดี อยากฟังเสียง น่ะ
What tires are you having in the bike?
I’m running Pirelli Diablo Rossi II
Yo which bar end mirror you using?
It’s a generic eBay bar end mirror
Holy shiet, I thought I was the only one that think purple suits with the Kawa green! I got purple levers.. Sick bike :D
Just something about it lol
What’s the speed limit of this motorcycle ? It looks so great !!
175
The 2019 zx6r top speed is 163ish I topped it out at road Atlanta. You can see this in my road Atlanta track day video on my channel
Can i ask who the seller was?
Ngmrides.com Northeast Georgia Motorsports
That's sweet bro
Thanks man!
Just gorgeous bike. 😍
looks good!
Thanks man!
Bike looks great. Does it come with a steering damper?
It does not. Onlins makes a damper for it though