Hello Sir I am makin a robot with six motors connected to wheels so i thought of connecting a ps4 controller to the esp32 to which then can be used to control the motors but i dont know how to connect 6 motors to the esp32 module can you please help me?
Sir I made the whole robot in the exact way as you mentioned in the video and have checked all the wire connections several times to make sure that I haven't made any mistakes. But after connecting the battery and uploading the code the robot is not working. Is there any way I can come in contact with you?
Hello Sir! i have made the car its ready but i am having difficulty is seeing the code from the video. I wrote a few lines visible but I can't see the rest of it. so could you please provide me the code? it would be really helpful for other creators too. I will be waiting for your reply. Thank You!😊
sir sorry for disturbing but my car is not working. I used 9V battery to run it but the light very dim and when i click on upload in the code it shows only uploading and nothing else. please help me out!
Hi, amazing work, can we make this 4 in 1 car and then add robotic arm on it using the help of your other video of robotic arm? is it possible or is it complicated and requires some extra learning?
@@parth1621 that itself is a complicated project . Adding it to this project is way complicated . You can try that on your own by combining 2 projects if possible 👍🏻👏🏻
Hello Sir, I made the whole robot, obstacle avoiding and object following mode are working properly, but line following mode is not working at all, the car keeps moving forward when I put it on the ground even if there is no black line!! PLZ HELP
@@Lenjosh I mean may be the connections you made is not correct . Please double check . Also use rechargeable battery only if not using already . It will avoid power related issues 👍🏻👏🏻
sir sorry for disturbing but my car is not working. I used 9V battery to run it but the light very dim and when i click on upload in the code it shows only uploading and nothing else. please help me out!
I am making the same line following robot and i have attached a third IR sensor at the top and i want my car to start to move only when the 3rd IR sensor is triggered so How would change the code?
Can I combine the robot in this video with your "Surveillance Car using ESP32 Cam module" robot? Meaning when the robot does not run automatically like in this video, I am able to control it with ESP32 Cam. How should I change the code? Thank you.
Right now it can only do one thing at a time. You will have to modify code to do all the things simultaneously. It will need testing as well . Give it a try yourself 👍🏻👏🏻
I have given all the connections according to the circuit diagram.But after connecting the batteries, the motor is not rotating.But when i connect it to the laptop, the sonar sensor is working but the motor is still not rotating. I have checked all the motors. The motors are fine.What can i do about it?
Please use rechargeable battery . Also check for any loose connections. It’s a big project so take your time and don’t rush . Check the video again for any missing step 👍🏻👏🏻
@@zarinanjumhossain8650 how much voltage ? You should use only 7-12 V battery . Use good rechargeable battery like LiOn cells or LiPo battery which I used 👍🏻👏🏻
Can we make without changing code for every mode i want that it work in line follower with obstical avoider and object follower without changing code .can we do with switch of other things please reply
I want that I upload all code at once and use different modes by turning on and off switch because I want to make a custom robot which has line follower with obstical avoider and object follower mode
I have 1 more doubt you make a 10 channel transmitter and receiver in receiver you use and step down module does it is important to use or if it is important so can we use LM2596 DC-DC Buck Converter Step Down Module because I will use 12v 2amp battery
Pls also make 6 channel and 8 channel and 10 channel brushed esc which can control from your homemade transmitter and receiver I want like I can control 6 or 8 or 10 brushed motor separately all in different directions I have idea can we make by Arduino nano 3 l298n motor driver and connect to homemade transmitter and receiver so we can control 6 brushed motor esc or for 8 channel 2 Arduino nano 4 motor driver so make 1 setup and use another Arduino and connect 1 motor driver so it become for 8 channel or for 10 channel we connect 1 more motor driver to 2 setup i search in Google but I have doubt so I ask please reply and make a video fast please
Bro I am having an arduino nano which is in defect while uploading the code it shows avr dude is not respondind. Some youtubers say to burn the bootloader but when i burn the boot loader it shows error as invalid signature. Please help me with a video . please. I am making a project called joystick controlled car from your channel
Hi can you make an autonomous car, that works in two modes wireless phone control and also line following, the car must be able to climb stairs while carrying small load
Hi, I followed the same steps and code and it's working but only 1 mode is working at a time, how do i make sure all the 4 modes are working simultaneously?
@@hashincludeelectronics please guide me 😔 If possible please provide me just line follower with obstacle avoidance please... I'm working on the project. Need to submit on 10th August. Please
Please make this my humble request too you Sir please make fire fighting robot including esp32 cam so that ie can see the potage please make sir make it like that we can control it by manual as well as automatically please help me sir Sir but don't use the Arduino uno r3 WiFi please use Arduino uno r3 only please Sir as mannual remote I have this one 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non-Locking). Please also use this one 😊
Hello Sir I am makin a robot with six motors connected to wheels so i thought of connecting a ps4 controller to the esp32 to which then can be used to control the motors but i dont know how to connect 6 motors to the esp32 module can you please help me?
You can make it easily . Check my video of ps4 controller car for reference 👍🏻👏🏻
can I do this using 2wd?
@@Lenjosh yes you can try . But you might need to change the speed and duration in code if required 👍🏻👏🏻
@@hashincludeelectronics sorry I am a beginner but how do you know the speed and duration you will code?
@@hashincludeelectronics yo
How big is the wooden plate for the car chassis?
You can use any suitable shape 👍🏻👏🏻
can we reuse our arduino uno that has been programmed?
@@Lenjosh yes you can 👍🏻👏🏻
can we use lithium batteries without using the battery in the video
Please use any rechargeable battery 👍🏻👏🏻
@@hashincludeelectronics can we use the orginal arduino chassi
without using the wooden one
Thanks you so much ❤️❤️❤️
Welcome 🙏
Thanks for the video 😊🎉
@@suraj_hirade welcome 🙏
Sir I made the whole robot in the exact way as you mentioned in the video and have checked all the wire connections several times to make sure that I haven't made any mistakes. But after connecting the battery and uploading the code the robot is not working. Is there any way I can come in contact with you?
Please check for any loose connections. Also use rechargeable battery to avoid power issues 👍🏻👏🏻
What are the pins for the servo sir....
Those are mentioned in video and also in circuit diagram 👍🏻👏🏻
Hello Sir! i have made the car its ready but i am having difficulty is seeing the code from the video. I wrote a few lines visible but I can't see the rest of it. so could you please provide me the code? it would be really helpful for other creators too. I will be waiting for your reply.
Thank You!😊
Code and diagram link is provided in the description of the video 👍🏻👏🏻
@hashincludeelectronics okay thank you
sir sorry for disturbing but my car is not working. I used 9V battery to run it but the light very dim and when i click on upload in the code it shows only uploading and nothing else. please help me out!
Hi, amazing work, can we make this 4 in 1 car and then add robotic arm on it using the help of your other video of robotic arm? is it possible or is it complicated and requires some extra learning?
It’s possible . However it is very complicated project 👍🏻👏🏻
How to change this as white line following
You will have to interchange the LOW and HIGH values in code. 👏🏻👍🏻
If I use a 4wd do I still need to adjust the duration and speed?
It should work as it is . However if needed then you can adjust accordingly 👍🏻👏🏻
is it okay if a cases like I don't have a m to m jumper wire I only have m to f so I cut it and connect to the other jumper wire to make a m to m
Yes that’s fine 👍🏻👏🏻
how can i add remote control in thi plz reply
For now we cannot add remote control to it . But I am planning to make a project using esp32 where we can use some app to control it 👍🏻👏🏻
@@hashincludeelectronics gesture control bhi nahi hoga??
@@parth1621 that itself is a complicated project . Adding it to this project is way complicated . You can try that on your own by combining 2 projects if possible 👍🏻👏🏻
how you start the robot after you connect it with batter .....is there any switch on button?
There is no switch . Once you power on , the robot will start . To not start the robot , you can remove 5v and gnd from Arduino 👍🏻👏🏻
how can i adjust so that it can start using switch?
@@DingDong-rc1ox just connect switch to power supply 👍🏻👏🏻
Sir can i use lithium ion battery
Instead of rechargeable battery
@@GaganGowda-o8q yes 👍🏻👏🏻
Hello Sir, I made the whole robot, obstacle avoiding and object following mode are working properly, but line following mode is not working at all, the car keeps moving forward when I put it on the ground even if there is no black line!! PLZ HELP
Please calibrate the bottom IR sensors properly👍🏻👏🏻
Sir also can we use L293D motor driver instead of L298N motor driver ?
Please use L298N driver only 👍🏻👏🏻
Hello sir how are you switching between the modes
We need to change setting in code and then reupload the code 👍🏻👏🏻
when I connect the yellow wire at the l298n that has wire connected in the battery, why when I connect it the light gets weaker and l298n gets hot
@@Lenjosh please make connections as per circuit diagram and as shown in video 👍🏻👏🏻
@hashincludeelectronics what do you mean?
@@Lenjosh I mean may be the connections you made is not correct . Please double check . Also use rechargeable battery only if not using already . It will avoid power related issues 👍🏻👏🏻
@@hashincludeelectronicsthe connections are correct and I'm using rechargeable battery
Can we use any battery
@@Informational8ai yes use only rechargeable battery 👍🏻👏🏻
can i change between modes through Bluetooth
Currently it’s not possible 👍🏻👏🏻
@@hashincludeelectronics is the servo motor continous?
@ nope . It’s 0-180 degree 👍🏻👏🏻
@@hashincludeelectronics is there is way to control this modes in one code?
@ right now it’s not possible 👍🏻👏🏻
how would i know how many duration and speed i will change in my robot using 2wd
It depends upon how the robot works 👍🏻👏🏻
Code for only abstucle avoidance + line follwer . Please 🙏
Please check the video for this step 👍🏻👏🏻
Ok thank you. I have subscribed @@hashincludeelectronics
can I use this code for two motor wheeler car with one front rotating wheel? (If I keep everything same as in video but use two motor wheels)
Yes you can . However you will have to adjust the speed and delay in code accordingly if needed 👍🏻👏🏻
Yes it's actually a 2 channel motor driver. Two motors are paralleled together for each channel
can we use our arduino that has been programmed?
@@Lenjosh yup 👍🏻👏🏻
sir sorry for disturbing but my car is not working. I used 9V battery to run it but the light very dim and when i click on upload in the code it shows only uploading and nothing else. please help me out!
Please use rechargeable battery only to avoid power related issues 👍🏻👏🏻
@@hashincludeelectronics okay thank you
@@hashincludeelectronics But sir what about the code? It doesn't upload
@@K-popTrending check the video for the code upload steps and follow it properly . 👍🏻👏🏻
I am making the same line following robot and i have attached a third IR sensor at the top and i want my car to start to move only when the 3rd IR sensor is triggered so How would change the code?
You can add a code to check the output of this IR sensor , and add if condition on its low/high value. 👍🏻👏🏻
What is a short circuit?
can i make it but with 2wd?
Give it a try . You might have to change the speed and duration in the code if required 👏🏻👍🏻
why the uno and sensors doesn't light up when I try to on it, I followed all the connections
Please check the video for any missing step 👍🏻👏🏻
Can we use rechargeable 3.7v lithium ion battery for the project. Please tell asap
@@ArchanaPal-eh9bg yes you can but please use 2 cells 👍🏻👏🏻
@@hashincludeelectronics okay thank you
Hello bro ,, can i use powerbank instead of battery
I tried this last year ,, and now again ,, but i failed every time ,, i use 2 to 3 thousands money ,, all wasted
What i do brother 😢
No . Please use rechargeable battery only 👍🏻👏🏻
7-12 V 👍🏻👏🏻
why the light will fade in the l298n if i turn it on and becomes so hot
May be there is short circuit . Or the motor is not in good condition . 👍🏻👏🏻
@hashincludeelectronics what do you mean a short circuit? and the motor is brand new
How to make all modes in one only
Wondering 🤔 ❤❤❤❤❤😮😮
@@AmitVerma-r8t 👍🏻👏🏻
Can I combine the robot in this video with your "Surveillance Car using ESP32 Cam module" robot? Meaning when the robot does not run automatically like in this video, I am able to control it with ESP32 Cam. How should I change the code? Thank you.
This is very complex project . Unfortunately don’t have time to make that one 👍🏻👏🏻
Sir, do you have simulation for this, it will help me a lot in my project, pls reply sir,
Unfortunately I don’t have that 👍🏻👏🏻
Pls reply how can we make a robot that can do all these things at a time pls also make video for it
Right now it can only do one thing at a time. You will have to modify code to do all the things simultaneously. It will need testing as well . Give it a try yourself 👍🏻👏🏻
I have given all the connections according to the circuit diagram.But after connecting the batteries, the motor is not rotating.But when i connect it to the laptop, the sonar sensor is working but the motor is still not rotating. I have checked all the motors. The motors are fine.What can i do about it?
Please use rechargeable battery . Also check for any loose connections. It’s a big project so take your time and don’t rush . Check the video again for any missing step 👍🏻👏🏻
But when i used rechargeable batrery, there was a spark and the casing got damaged
@@zarinanjumhossain8650 how much voltage ? You should use only 7-12 V battery . Use good rechargeable battery like LiOn cells or LiPo battery which I used 👍🏻👏🏻
Can we make without changing code for every mode i want that it work in line follower with obstical avoider and object follower without changing code .can we do with switch of other things please reply
Do You want to upload entire code once and then want to change modes based on switch ?
Yes
I want that I upload all code at once and use different modes by turning on and off switch because I want to make a custom robot which has line follower with obstical avoider and object follower mode
I have 1 more doubt you make a 10 channel transmitter and receiver in receiver you use and step down module does it is important to use or if it is important so can we use LM2596 DC-DC Buck Converter Step Down Module because I will use 12v 2amp battery
Pls also make 6 channel and 8 channel and 10 channel brushed esc which can control from your homemade transmitter and receiver I want like I can control 6 or 8 or 10 brushed motor separately all in different directions I have idea can we make by Arduino nano 3 l298n motor driver and connect to homemade transmitter and receiver so we can control 6 brushed motor esc or for 8 channel 2 Arduino nano 4 motor driver so make 1 setup and use another Arduino and connect 1 motor driver so it become for 8 channel or for 10 channel we connect 1 more motor driver to 2 setup i search in Google but I have doubt so I ask please reply and make a video fast please
I cannot find mac address tried adding vector but still code is not working in hand gesture car esp 32
Let’s have a chat under that video 👍🏻👏🏻
Please make a arduino Uno robot
1. Bluetooth remote control
2. Line following + object avoiding
3. Object avoiding
Will try that 👍🏻👏🏻
❤❤❤❤❤
Bro I am having an arduino nano which is in defect while uploading the code it shows avr dude is not respondind. Some youtubers say to burn the bootloader but when i burn the boot loader it shows error as invalid signature.
Please help me with a video . please. I am making a project called joystick controlled car from your channel
Ok . Try to select old bootloader option while uploading the code . 👍🏻👏🏻
Bro it too also done but not uploading
@@FilbertJason May be your board is faulty . Try another nano 👍🏻👏🏻
Ok bro Thanks
Hi why my arduino port not showing in the arduino ide
Please follow the steps in video 👍🏻👏🏻
Hello sir please help me in esp 32 hand gesture car
We can have chat under the comment section of that video 👍🏻👏🏻
How will it work in sunlight? It does not work in sunlight, the motor is always running.
@VivekYadav-v1r9w this is very basic robot which uses IR sensors and has impact in sunlight 👍🏻👏🏻
How to install the NewPing. In mobel.
Unfortunately I don’t know how we can do it in mobile 👍🏻👏🏻
Ok I am installed in pc. Thanks you.
@@AnuKolivad nice 👍🏻
Good idear🥰
Thank you so much 👏🏻👍🏻
👌👌
👍🏻👏🏻
Bro how to change code modes bro please that's the only doubt i have and remaining all prefect bro
Please reply mee
WAITING 😊
@@lokeshreddy552 you need to change it in code and upload the code again . Please check the video for this step 👍🏻👏🏻
Thank you so much ❤
All set to blast today in the college🥳
@@lokeshreddy552 hi, did it work? like do we have to upload the code 4 times in arduino for 4 diff modes?
connections are correct but the Arduino uno don't lights up and it's new
Please check the connections again . There may be small mistake when you are connecting components 👍🏻👏🏻
Hi, Can you make the same 4 in 1 robot including Bluetooth control function , but using esp32 board instead of Arduino.
Yes I am going to try it 👍🏻👏🏻
Hi can you make an autonomous car, that works in two modes wireless phone control and also line following, the car must be able to climb stairs while carrying small load
Will try 👍🏻👏🏻
Bro i used 1200mah 3.7v lithium battery 2 but it is not working bro plese rply
Please check the video slowly and carefully for any missing step 👍🏻👏🏻
How can ı reach you ?
You can send me an email . Please check the channel page 👍🏻👏🏻
I have uploded your code but it is showing that the programmer is not responding
What exact error are you getting ? Try selecting old bootloader 👏🏻👍🏻
how about 2 wheels
You can use 2 wheels however you will have to make changes in code and adjust speed and delays accordingly 👍🏻👏🏻
@@hashincludeelectronics How can I change it? Can you help me?
Hi, I followed the same steps and code and it's working but only 1 mode is working at a time, how do i make sure all the 4 modes are working simultaneously?
We need to test it 👍🏻👏🏻
@@hashincludeelectronics sir i only want obstacles avoiding+ line following code can you help me please
IS IT CODE WORKING OR NOT BRO
PLEASE REPLY ME FAST BRO
It works perfectly. Try it first 👏🏻👍🏻
Thank you its working 🎉 thank you so much bro
Really amazing 🤩 broo once again thanks bro
We have done it today and it's working
@@lokeshreddy552 nice job 👍🏻
I just want to add two things only.
Line follower + obstacle avoidance.
Which code should I upload please tell me it's urgent.
The code is same . You just need to change one setting in code . Please check the video👍🏻👏🏻
@@hashincludeelectronics please guide me 😔
If possible please provide me just line follower with obstacle avoidance please... I'm working on the project. Need to submit on 10th August. Please
@@niteshnitx check the demo section please .
@@hashincludeelectronics actually I'm using just bottom IR sensors only that's why I'm getting confused. 😔
Please make this my humble request too you
Sir please make fire fighting robot including esp32 cam so that ie can see the potage please make sir make it like that we can control it by manual as well as automatically please help me sir
Sir but don't use the Arduino uno r3 WiFi please use Arduino uno r3 only please
Sir as mannual remote I have this one 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non-Locking). Please also use this one 😊
Ok I will try👍🏻👏🏻
No work, bad
What issue are you facing ?