This looks like a really nice project I can use this all over and will try it out first, thanks for your effort. If this works for me I will definitely be buying a licence.
I update my ESP automation project daily but occurs many errors in code. After seeing your video my work is wrost ☺️ it really good. I will try it now then tell you how it works 😃
Make sure that the esp flash download tool setting is correct exactly like the picture here: egycad.com/cadio/docs/firmware/esp8266-firmware/ and after installing the firmware, reset the esp, after 15 seconds, leds will blinking, and the esp wifi network will start.
sir i have a question who will esp8266 know the real time status of Switch whether its ON/OFF which sensor is used to analysis the real time status please do guide us
hi, after configuration device not showing in cadio app can u tell me what's the problem and sometimes com port also not showing while downloading the firmware in esp32
Thank you! Glad you liked it! Yes you can use ESP32, you will need to install CADIO firmware on the esp32 with the steps showen in this video: ua-cam.com/video/RvKj8Id5e08/v-deo.html Then, everything is the same, the only difference is that in the info file step, the ESP32 GPIOs will be displayed instead of the ESP8266 GPIOs.
The biggest drawback is its valid only for some 500 hrs which makes it unrealistic to upload firmware every 500 hrs. Please release your commercials somewhere on your website.
After doing everything, press the rst button on the board and the blue light will come on and then disappear. There are no red or blue flashing lights. I've done it many times and it's still not the same.
It looks fantastic bro. Is there any API to work with nodered? If yes, it is perfect. Again like Shelly devices they do have both Cloud and local MQTT support too.
This is nice. I love this, for a moment I was lost because I have a similar breadboard but mine the power and ground lines don’t run across the entire breadboard. The line goes from one side and stops at the middle then continues on the next pin to the end. I was struggling to understand how power is supplied to the board since I don’t see any wires crossing / taking power from the left side to the right 😅. Then I noticed the breadboard lines they run across the entire breadboard. Not divided in half, meaning power goes through the entire breadboard. I need me this kind of breadboard
Have tested this and love the project it works like a dream thanks for your effort. Is there more features coming out? as I would really like to also control the garage doors that requires a press button that gives a 1s pulse
For controling devices with two directions motor like garage or curtains, there is a device type called SHUTTER, you can define two GPIOs for two relays for motor directions, and two GPIOs for two pushbuttons, I will make a video about it soon, Check this like for more details: egycad.com/cadio/docs/devices-types/shutter/
Good presentation of an interesting platform. Wish you luck! I use Wemos D1 with Tasmota but would think of moving here, especially with the 433 integration. First problem, must be usable with Alexa, but cannot see the skill on the Spanish Amazon site. Any solution here?
Do I need to connect ESP and Phone to same WiFi network for this project to work? Actually, I need to control remote lights/appliances through ESP using home WiFi network and by phone app using mobile internet from a very far location.
Hello, i have done all the process according to your video but at the last moment after savings the configuration, the unit is not scanning network @4:33 minute.
May be there is a problem in the GPIOs you are using. Some GPIOs make the boot fail if they pulled low or high, please check this link for more information: randomnerdtutorials.com/esp8266-pinout-reference-gpios/ Also feel free to send me a screenshot of your info file setting and your circuit via email to review it and find the problem: cadio@egycad.com
@@cadioHomeAutomation gpio 13 for 433MHZ, wifi led gpio 16, Cloud gpio 2, Ir transmit gipo 3, ir receive gpio 1, 433mhz recive led = 12, 5 relays gpio = 27,26, 25,33,32 and manual switch gpio = 19,18, 5, 17, 4, 22 respectively Dht sensor on gpio = 21, Ir tx = 23 ir rx = 22 Led on ESP32 freezes at ON state but its dimm
Also wifi led starts blinking but i am not able to connect esp32 from my mobile while all the sensors and relays are connected, but if i removed the esp32 from my pcb then i am able to configure wifi credentials
Sorry sir, I want to ask. 1. what is the maximum number of relays that can be controlled by cadio? 2. Is there any guide in confirming for ESP with multiple relays? is there a daily weekly schedule menu? 3. Can Cadio be accessed via PC? Thank You
You can connect the switch first wire to the GPIO and the second wire to gnd (and make sure that switch wiring is set to pullup in the info file). You can check the link, it will help you selecting the GOIOs: randomnerdtutorials.com/esp8266-pinout-reference-gpios/
You need a wifi network to control your units. We mean by offline that if your wifi network internet connection lost, you will be able to control the unit locally if the unit and the smartphone are connected to the same wifi network.
What if my wifi not working properly and i want to configure it with another wifi available but at the same time i an not available near my hardware setup, assume my device is in another city from me....
Currently, you need to be in the unit local network range to be able to configure it. Thank you for submitting this suggestion, it will be taken into consideration during the discussion of future developments.
What will happen to my premium plan if the unit /esp is dead. ie the board is damaged , is unit I'd saved on my email or its a specific I'd for esp board ,so if damaged ,it means the premium purchase is gone forever.Please clear this little bit of confusion 😄
Realy it,s not a good option cadio modify this and allow permanent licence for consumer Gmail I'd,s that,s a best option when ESP is damage consumer purchase a new board and install same
@@sachinsoni3792 the module in the video: a.aliexpress.com/_mtqyufa Good alternative: a.aliexpress.com/_m0jmDic Another alternative but with bad range: a.aliexpress.com/_mNtv2wY
You're welcome! Actually, we are planning to keep the the permanent licenses system for the units, we believe this will lead a better user experience in the long run.
@@ethanming7096 this is the cause of the problem, try using a different network or a different VPN service, may be some issues in the connection causing that the servers don't trust it!
@@subramanyags5263 GPIO is the ESP pin. Kindly check this link for the ESP pins GPIO number: ESP8266: randomnerdtutorials.com/esp8266-pinout-reference-gpios/ ESP32: randomnerdtutorials.com/esp32-pinout-reference-gpios/
You can add up to 21 device on every single unit. By default, the unit has a trial license, it gives the unit full functionality for 500 operating hours, and it can be renewed for an unlimited number of times by eraseing and re-installing the firmware. And you can purchase the permanent license from license management page, the permanent License gives the unit a permanent permission to use CADIO system resources. For more information about CADIO you can visit CADIO developers docs: egycad.com/cadio/docs/discover-cadio/
@@cadioHomeAutomation how much is the permanent license And what is the procedure Please is there anything to do to activate local control or it comes by default once the device is configured
@@smartteg7381 the permanent license current price is $8 for the unit, it's a one time purchase and valid permanently, you can purchase the permanent license from license management page, in the video at 09:00
@@smartteg7381 once the unit is configured, the local control will be activated, and if the unit and the smartphone are on the same network, the wifi icon beside the unit name will be activated and you can control it locally. If you have a network with no internet connection at all, you should select a unique unit position on the network from configuration page instead of auto positioning, and it will run smoothly.
Haven't tried that, but generally you need to flash the esp with the firmware binary file with the correct setting, any method should works! Unfortunately my smartphone doesn't support this feature, I will try it when available and I will share the results.
This looks like a really nice project I can use this all over and will try it out first, thanks for your effort. If this works for me I will definitely be buying a licence.
❤ your app looks amazing 😍 very lovely
Thank you 😊, Glad you liked it!
I update my ESP automation project daily but occurs many errors in code. After seeing your video my work is wrost ☺️ it really good. I will try it now then tell you how it works 😃
I'm sure you will like it! 😍 Waiting for your feedback! ☺️☺️
@@cadioHomeAutomation I'm doing it right now but in the Wi-Fi section ESP cadio will not appear.
What should I do for it
Make sure that the esp flash download tool setting is correct exactly like the picture here:
egycad.com/cadio/docs/firmware/esp8266-firmware/
and after installing the firmware, reset the esp, after 15 seconds, leds will blinking, and the esp wifi network will start.
@@cadioHomeAutomation8:20
Amazing app very easy to configure waiting for more features for buying full version 😊
Excellent work, love the Egyptian app
Love from Egypt
Will you add widgets to the app in the future ISA?
Thank you! Glad you liked it!
Yes we are planning to add some widgets in the v3 ISA.
Cadio plz reply my message😢
sir i have a question who will esp8266 know the real time status of Switch whether its ON/OFF which sensor is used to analysis the real time status please do guide us
٨٨خخخ٧اعنظظن٦٨٨٠😊😊😂
Switch is connected in parallel
the switch is not connected to ac mains supply, it just shorts gpio pins with gnd.
The switch is connected input pin of esp and the other leg is either pulled up or pulled down which is detected by esp "high or low"
It is paid app. But it gave me a lot of ideas for my own app functionality. 😅😂❤
Hello, can I use this app to set an alarm for a motor driver that will be used for automatic window blinds?
Adding a Bluetooth feature would be great
Please make a detail video on connecting 2 or more esp32 to send signals to each other
Me too want this feature
google espnow.
I appreciate your efforts, it was an amusing tutorial 😊👍👍👍
Glad you liked it!
Alexa after sign in use cadio compte : Impossible de lier les comptes. Votre application Alexa a besoin d'une mise à jour.
Excellent work sir.glad to meet you sir.
How can I perches esp8266 modul tell me
ayuda no puedo vincular CADIO con Amazon Alexa
Great Home Automation. But licence is so expensive beause single unit based licence. Account base licence is better.
Yes Gmail account based is better when cadio provide will buy
I cannot get the software inteface to an arduino board to work. Nothing is sent from the ESP8266. Has anyone else succeded?
It work perfect but when the esp8266 turn off and you turn it on again all the data on esp8266 is clash what need to do for that
flash tool is not running
Hello, i use a wemos d1 r2 wifi wit esp8266 but it constantly fails and says com fail. What do i have to do?
Does this application not need to write code
Great software! Can it using data sensor such as temperature sensor to tell what temperature in my room?
how can I reprogram it?
Awesome App & controls 👍. Are you the developer of the app?
hi, after configuration device not showing in cadio app can u tell me what's the problem and sometimes com port also not showing while downloading the firmware in esp32
CUANDO BAJAS EL ARCHIVO ZIP NO APARECE EL BINARIO DENTRO DE LA CARPETA.....POR QUE?
Excellent presentation. Clear voice. Go ahead sir with innovative videos. Can I use Esp 32?. If so any modifications?
Thank you! Glad you liked it!
Yes you can use ESP32, you will need to install CADIO firmware on the esp32 with the steps showen in this video:
ua-cam.com/video/RvKj8Id5e08/v-deo.html
Then, everything is the same, the only difference is that in the info file step, the ESP32 GPIOs will be displayed instead of the ESP8266 GPIOs.
Cadio doesn't work over internet in jammu
Can you please share how to connect 8 channel relay
Hi i need to cadio firmware of 2Mb flash size for esp01 module. I don't found it in your website!!
Great work
what about offline mode? can i control my device locally?
Can you increase the number of devices to be added(as of now21) to more during the next update
The biggest drawback is its valid only for some 500 hrs which makes it unrealistic to upload firmware every 500 hrs. Please release your commercials somewhere on your website.
when I erase the board, I got a problem it said , Com Fail
some one help please
After doing everything, press the rst button on the board and the blue light will come on and then disappear. There are no red or blue flashing lights. I've done it many times and it's still not the same.
When looking for cardio wifi in the wifi list, I can't find it.
It looks fantastic bro. Is there any API to work with nodered? If yes, it is perfect. Again like Shelly devices they do have both Cloud and local MQTT support too.
Unfortunately not supported!
But local control is supported, you can control your devices over local network if there is no internet connection.
the sensor DHT updates data so slowly
It doesn't store last stage of devices
Como conectaste los 5v es que veo que no tienes oñxonectadala placa al la cpu
Can the Cadio application be installed on a PC?
How to erase the firmware and reinstall it...and thank yoouu sooo much... I've build it and very happy of your services
Glad you liked it!
To erase and re-installing the firmware, kindly follow this video:
ua-cam.com/video/kMnF9vqDa1k/v-deo.html
Can we use fan controller as well? How?
Please add Bluetooth for ESP32
Is there a dark mode for the app interface?
This is another level 😮❤
Can it recieves data from sensors like tds,pH
is it possible to control your set up even if you are not on the same network?
Of course, you can control over internet using CADIO cloud!
can I use this in my biometric fingerprint scanner project?
Is it possible to have a Servo motor in Cadio?
This is nice. I love this, for a moment I was lost because I have a similar breadboard but mine the power and ground lines don’t run across the entire breadboard. The line goes from one side and stops at the middle then continues on the next pin to the end. I was struggling to understand how power is supplied to the board since I don’t see any wires crossing / taking power from the left side to the right 😅. Then I noticed the breadboard lines they run across the entire breadboard. Not divided in half, meaning power goes through the entire breadboard. I need me this kind of breadboard
Have tested this and love the project it works like a dream thanks for your effort. Is there more features coming out? as I would really like to also control the garage doors that requires a press button that gives a 1s pulse
For controling devices with two directions motor like garage or curtains, there is a device type called SHUTTER, you can define two GPIOs for two relays for motor directions, and two GPIOs for two pushbuttons, I will make a video about it soon,
Check this like for more details:
egycad.com/cadio/docs/devices-types/shutter/
@@cadioHomeAutomation please send me how do you use it for garage door opener
Amazing
Can used water tank level with oled ?
How to add sonar sensor in cadio, it has 2 input output pins
Not supported yet
Good presentation of an interesting platform. Wish you luck!
I use Wemos D1 with Tasmota but would think of moving here, especially with the 433 integration. First problem, must be usable with Alexa, but cannot see the skill on the Spanish Amazon site. Any solution here?
It will be added soon!
Super sir
Whats the name for the dc apapter
Do I need to connect ESP and Phone to same WiFi network for this project to work?
Actually, I need to control remote lights/appliances through ESP using home WiFi network and by phone app using mobile internet from a very far location.
No need to be on the same network! You can connect via internet over cloud from anywhere
Can i check volt
If my nodemcu is broken or flashed defoult firmware how can i get my payd lisens?
egycad.com/cadio/docs/pricing/
Dear sir
Plese provide Esp01 Cadio firmware 2 MB ..
Hello, i have done all the process according to your video but at the last moment after savings the configuration, the unit is not scanning network @4:33 minute.
May be there is a problem in the GPIOs you are using.
Some GPIOs make the boot fail if they pulled low or high, please check this link for more information:
randomnerdtutorials.com/esp8266-pinout-reference-gpios/
Also feel free to send me a screenshot of your info file setting and your circuit via email to review it and find the problem:
cadio@egycad.com
And please explain what is the relation between GPIO and switch that you mentioned in your video (on/off, GPIO-4 , SWITCH-12) @4:03 minutes
@@Amankumar-uy2tm the relation is the switch which is connected to GPIO12 can be used to control the relay which is connected to GPIO4
new firmware has some error wifi gets reset and after that i am unable to connect to ESP32 for configuring Wifi Credentials F197B
What is the indicators LEDs status? And the GPIOs you are using?
@@cadioHomeAutomation gpio 13 for 433MHZ, wifi led gpio 16, Cloud gpio 2, Ir transmit gipo 3, ir receive gpio 1, 433mhz recive led = 12, 5 relays gpio = 27,26, 25,33,32 and manual switch gpio = 19,18, 5, 17, 4, 22 respectively Dht sensor on gpio = 21, Ir tx = 23 ir rx = 22
Led on ESP32 freezes at ON state but its dimm
Also wifi led starts blinking but i am not able to connect esp32 from my mobile while all the sensors and relays are connected, but if i removed the esp32 from my pcb then i am able to configure wifi credentials
D1=possitive (led)
Negative=??(led)
WOW. Amazing apps. I Love it.👍
Can i add sensor DS18B20?
Is it could work with WEMOS D1 Mini module?
Glad you liked it! 😍
Yse, CADIO works on any esp8266 with 4MB or 2MB flash size.
Sorry sir, I want to ask.
1. what is the maximum number of relays that can be controlled by cadio?
2. Is there any guide in confirming for ESP with multiple relays? is there a daily weekly schedule menu?
3. Can Cadio be accessed via PC? Thank You
16 max relays
Just add gpio number it's easy
No pc access
Is voice generated by AI?
Can u please help of wiring...which pins i have to use for 3lights and 1 fan with regular switch
Check the table in this link and select the GPIOs which have a green OK for the usage purpose.
randomnerdtutorials.com/esp8266-pinout-reference-gpios/
Please help me how you wired switches because a switch has two wire socket.. i want to use 4 switches and 4 relays...love from Bangladesh ❤
You can connect the switch first wire to the GPIO and the second wire to gnd (and make sure that switch wiring is set to pullup in the info file).
You can check the link, it will help you selecting the GOIOs:
randomnerdtutorials.com/esp8266-pinout-reference-gpios/
Can this support GPIO port extended(through I2C) devices like PCF8574 and MCP23017?
Unfortunately not supported yet!
It will be added in version 3.
Thanks, but you are not telling offline! ,So I want to connect with Mac address without WiFi,can it done!
You need a wifi network to control your units.
We mean by offline that if your wifi network internet connection lost, you will be able to control the unit locally if the unit and the smartphone are connected to the same wifi network.
Can we use 8 channel relay and 8 manual switch in esp82666
No, there is no enough GPIOs, in this case you need an esp32
how to use pin D3 (GPIO0) on esp 8266 pls
By default it is selected for the config button, but you can normally change it from the info file page
What if my wifi not working properly and i want to configure it with another wifi available but at the same time i an not available near my hardware setup, assume my device is in another city from me....
Currently, you need to be in the unit local network range to be able to configure it.
Thank you for submitting this suggestion, it will be taken into consideration during the discussion of future developments.
@@cadioHomeAutomation Ok thanks
Amazing project Sir, Do the esp 32 for more GPIO please, cause i have 8 lamps to control
Cadio is not found on Amazon alexa app..in indain site
Please make sure language is English
so standard smart home, but not AI then...
What will happen to my premium plan if the unit /esp is dead. ie the board is damaged , is unit I'd saved on my email or its a specific I'd for esp board ,so if damaged ,it means the premium purchase is gone forever.Please clear this little bit of confusion 😄
Unfortunately, the permanent license is fully associated with the unit, it can't be transferred to another unit
@@cadioHomeAutomation ok but think of it ,it's not a good option
Realy it,s not a good option cadio modify this and allow permanent licence for consumer Gmail I'd,s that,s a best option when ESP is damage consumer purchase a new board and install same
Give permanent licence for I'd,s incase my ESP is dead or not work
Is there have any fan control system? So that we can adjust the fan speed also?
I will make a video about ac dimmers soon!
@@cadioHomeAutomation Thanks man
Cadio is not showing in Alexa
Why
Please make sure language is English
Can I connect multiple devices and Nodmcu to this app?
Yes of course, you can add unlimited number of units (ESPs).
by using this can i control devices from anywhere in the world by using internet ?
Yes, exactly!
How to wire connect in which pin
Circuit diagram in the description
My device nodemcu not showing wifi
What is the indicators LEDs status?
@@cadioHomeAutomation nothing, i search any video about Cadio on UA-cam have same problem
@@muhamadqih are you using gpio15?
which RF receiver you used here?
Can you share it's link please
SRX882
@@cadioHomeAutomation unable to find that module.
Any alternative?
@@sachinsoni3792 the module in the video:
a.aliexpress.com/_mtqyufa
Good alternative:
a.aliexpress.com/_m0jmDic
Another alternative but with bad range:
a.aliexpress.com/_mNtv2wY
Wowww
How can I buy a premium account? what's the prices?
The permanent license is per unit, not the account.
egycad.com/cadio/docs/pricing/
Is it completely free? Any limits?
This can be use over the internet or only wifi ? If i am not at home i can send command fromt he cadio app to the esp8266 ?
Over internet
@@cadioHomeAutomation The price plan is one time or per month ?
One time purchase and valid permanently (per unit)
egycad.com/cadio/docs/pricing/
Cannot find details on pricing for the permanent licence. Can you please share the details?
You can find the price in your currency in the app "unit license management page" the current price in usd is $7.99
@@cadioHomeAutomation Thats really good. Is it for lifetime or particular time frame?
@@madhukeshnp for lifetime, the unit permanent license is a one time purchase, and valid forever!
@@cadioHomeAutomation Thats really good. Thank you for the quick response. Are there any pricing planned in the near future?
You're welcome!
Actually, we are planning to keep the the permanent licenses system for the units, we believe this will lead a better user experience in the long run.
Hello
can you control the door stepper motor
Unfortunately not supported yet
@@cadioHomeAutomation
thanks
Great work
How to add ac fan dimming?
ua-cam.com/video/HcYCt668MMo/v-deo.html
I just tried to install it, but it say trial license expired with no way to renew, despite I am a new user 😢
OK don't worry I will help, Are you using any VPN? Is google service available in your country?
@@cadioHomeAutomation yes I'm using VPN, Google is not available in my country. But I have a VPN running directly on router
@@ethanming7096 this is the cause of the problem, try using a different network or a different VPN service, may be some issues in the connection causing that the servers don't trust it!
@@cadioHomeAutomation I've got it working now thanks! By the way can I use servo motors with Cadio?
@@ethanming7096 congrats 🎉, happy to hear that 😍😍
is your subscription is as per device
Per unit, for more details:
egycad.com/cadio/docs/pricing/
i can't sign up account
I also have the same problem but when I forget my password and reset my password the problem is then sought out.
How to control single led without relay sir?
Just connected it between the GPIO and GND.
@@cadioHomeAutomation sir gpio means
GPIO =POSITIVE OR NEGATIVE
@@subramanyags5263 GPIO is the ESP pin.
Kindly check this link for the ESP pins GPIO number:
ESP8266:
randomnerdtutorials.com/esp8266-pinout-reference-gpios/
ESP32:
randomnerdtutorials.com/esp32-pinout-reference-gpios/
How to control motors
For curtains motors you can use shutter device type, I will make a video about it soon
Nice project but how many device can you have on 1 esp32
Is there any paid plan
Please let as know all the restrictions
You can add up to 21 device on every single unit.
By default, the unit has a trial license, it gives the unit full functionality for 500 operating hours, and it can be renewed for an unlimited number of times by eraseing and re-installing the firmware.
And you can purchase the permanent license from license management page, the permanent License gives the unit a permanent permission to use CADIO system resources.
For more information about CADIO you can visit CADIO developers docs:
egycad.com/cadio/docs/discover-cadio/
@@cadioHomeAutomation how much is the permanent license
And what is the procedure
Please is there anything to do to activate local control or it comes by default once the device is configured
@@smartteg7381 the permanent license current price is $8 for the unit, it's a one time purchase and valid permanently, you can purchase the permanent license from license management page, in the video at 09:00
@@smartteg7381 once the unit is configured, the local control will be activated, and if the unit and the smartphone are on the same network, the wifi icon beside the unit name will be activated and you can control it locally.
If you have a network with no internet connection at all, you should select a unique unit position on the network from configuration page instead of auto positioning, and it will run smoothly.
@@cadioHomeAutomation this what we've been waiting for please do a video on how to pay for the plan
Makers will love this cloud
Purtroppo anche se non lo dice nel video, Cadio è a pagamento, non free.
CADIO license system was explained at 09:00
@@cadioHomeAutomation Si, è vero, scusa. Mio errore perché conosco poco l'inglese.👍
Hi sir , can i flash esp8266 using android?
Haven't tried that, but generally you need to flash the esp with the firmware binary file with the correct setting, any method should works!
Unfortunately my smartphone doesn't support this feature, I will try it when available and I will share the results.