Best timing dude! I follow you because of the Flipper Zero (great content btw) and when i started getting into the Marauder stuff and got stuck with some functions, you uploaded your walkthrough video just the same day. Two days ago i started building my first pwnagotchi and instantly ran into trouble getting the e-ink display to run. Now you upload the guide to my exact problem again. This is great! 😄 Thx!
Best timing ever. I just built mine 3 days ago and just realised as I'm using it headless, waiting for the waweshare to arrive, that I ordered a V3. Remember if you flash the 1.5.5 it won't go into ai mode for whatever reason. A workaround is to flash the previous version and enable bt tethering and have it auto update.
@@cyberspacemanmike 1.5.5fi doesnt work for me, first boot is good, but once it loads into AI mode, it just doesnt do much, sometimes it will just freeze up with status "Ai mode loaded" and other times it will load AI and just not detect any networks..
@@Alriskeke If you interrupt the initial startup it can corrupt the keys. Sometimes the initial startup will take 20mins or more in my experience. In general it takes a long time to boot.
@@cyberspacemanmike i tried leaving it for a full hour. Reflashed 5 times. Rpi0w, waveshare 3 & A2 quality sdcard. Squatches guide in conjunction with flashing 1.5.3 and letting it auto update now works perfectly.
Thank you so much! I was able to finally make my own little guy this week! I'm a noob and use a mac, but I couldn't have done it out without your video!
Thanks for posting this video I wanted a pwnagotchi so bad and I have no raspberry pi experience at all but after watching your video, gave me enough confidence to think that I could put together one of these. I got my raspberry pi and my waveshare 2.13 inch screen as-well as a sd card and within a half hour I had my lil pwnagotchi up and running thanks to your video. Thanks so much man you saved me over 200$ 💻 🎉 🔥
Could you tell me please when you first plugged it in the computer did you see any lights or you had to wait for that 30 min and after that you saw it?
thank you for your help, It took me awhile to get working as i have to manually copy the 6 files over, ps I have a V3 screen (as you probably guessed). Just wanted to say thanks. Keep up the good work.
At around 11:30: I'm updating my config.toml to match, but when I restart nothing happens. In the FTP, it doesn't show the id_rsa.pub, id_rsa, or fingerprint files. Wondering if that's related to my issue. I tried following another guide as well with no luck. Wondering if my display was DOA and I'm grasping at straws?
The bash files can be found in the guerilla step guide. Your v4 will work but keeps blinking then change the name in the config file from whaveshare 4 to 3. Let me know if it works for you!
hey, umm my pwnagotchi will not pop up in the device manager. I’ve tried everything from redownloading the pwnagotchi image and re etching it to downloading multiple things. It will not show up in port com.
I haven't used the new Waveshare HAT+ Display on a Pwnagotchi, but it works great on my Bjorn using V4 settings. However, it is definitely an upgrade because the screen has noticeably higher contrast, and another even more important feature. It lacks the 8-pin connector, and because of the topography of the board, you can make the HAT+ Display and a Pi Zero 2 W incredibly thin. To take full advantage of this, you must remove the plastic from your headers, although this isn't the easiest task. I think I'm just going to use extra long hammer headers, remove them from the plastic so that I can insert them from the rear and not have to use a vise as I would otherwise. I will likely still need to solder them in place, probably from the top, and I will need a female connector or something to keep them aligned. Hopefully this goes well.
this probably has already been suggested, but for changing display mode into dark/light you don't have to modify the scripts in the system files. Use "ui.invert = [true/false]" (one of them without the brackets) in your config.toml instead
I'm have trouble getting my pwnagotchi to ssh in while I've got internet sharing active. I can connect through ssh when it's not active, but then I can't run the script to update the v3 drivers. I get a message when I activate internet sharing that the ip is changing and that other devices might lose connection, and I didn't see that here in the video. If anyone can help it would be greatly appreciated.
@@mr_fusion85 sounds good! Keep me in the loop! I'm going to tinker with mine some more tonight. That's the only step I'm missing to get my screen to work.
And once you get to step 5 in the xycl0se tutorial the bin file will work. Step 2.3 is CRUCIAL and so is making sure that the ip of your pwnagotchi is correct after sharing your network.
Hey Sasquach Not sure if you were aware but you can detect Pwnagotchi's in action with Marauder by using the Pwn sniff. Also what is your Pwnmail address? Keep up the great work man !! (EDIT) Oh hey also there is a very nice battery bar indicator plugin that you can use the with PiSugar 2
Any idea if this process works for the V4 variant? Those seem to be the only ones available on Amazon and already ordered it. Any info would be appreciated. Thanks.
@@ScottyP5947 not for me. Got all the way until the end when loading all the libraries and such from GitHub and it just wouldn’t pull the last few of them. I’m not a programmer or computer science person so I don’t really know why. In looking through the libraries or directories it was trying to download it said “Waveshare v3” a lot so I don’t know if that had something to do with it. Like maybe I need to be pulling different ones since it’s the v4. Been trying to find the v3 screen since and no luck. Bought 4 of them, all v4.
Hi dude! want to thankyou about the video but I ask if you can help us with something: I saw some people and I have problems once we paste the bash code to make the V3 screen work... can you check this issue? Cheers!
Tried to build one. Bought recommended parts. I get no power to my display, and I don’t know if it is because the power board is not properly connected, the Pi isn’t working, or the display isn’t working. Too many variables. I am finding things a pain to use and figure out.
In windows power shell (cli) I tried at 12:38 pasting the raw file in power shell and I’m getting a “cp: cannot stat waveshare3.py: no such file or directory” after I changed it in the (config.toml) file in FZ….so idk 🤷
Hey So when I go to filezilla and the quickconnect it says Error: Auethentication Failed and Error: Critical Error: could not connect to server any help with this would be greatly thankful for
Struggling a little after following the video step by step my Pwnagotchi is not showing up when I connect to the pc. I have tried a few different cables and other Sd cards but nothing?
Thanks for the video, What is the brown band around the end it doesn't show on the device i bought on Amazon. So Im a little lost you go from powershell into Linux?
multiple formats to the sd and two screens later, i still cant get this to work. everything is working under the hood, ssh operational, but screen does nothing so far.
Having trouble finding the device in device manager. I don't see anything pop up in those areas nor others...Anyone else run into this or know how to fix this so i can do the driver update?
at 8:12 in my ethernet properties in the sharing tab, i dont have the option to select a home networking connection, only the 2 check boxes. how do i fix this? the pwnagotchi has the right drivers and is an ethernet gadget, same setup as you. same problem occurs on wifi. whe i try to SSh in it says request refused but i can still ping it.
I've started marking the ports on the pi zero. I can never remember which is power. Might be a good case mod. A power symbol on the correct side. I just use a little sticker right now.
@@aaronmilliman7685 @estevanrios7948 Any issues running the script are usually down to your Pi not having internet access or having DNS issues, so be sure to check the part of the video that covers Internet Sharing and / or DNS fixes (changing /etc/resolv.conf) ... @TalkingSasquach Glad the script is helping folks. :)
@@user-jt1wl3tw1dyeah but he replied with no manners 😂 People think they can just get stuff for free and be all bosses about.😅 Some people dedicate expensive time to put out nice things for everyone and people like that guy just asking like he deserves it. So yeah 😂 his mom 😅
Sadly didn´t work for me =( somehow i don´t get the screen running. And i bought the Waveshare 2.13 Inch e-Paper Display HAT V4 i don´t know what i am doing wrong here...
With the Waveshare V4 you need to find the image 1.5.5 FIX. This should be the only modification that needs to be made to the config. ui.display.enabled = true ui.display.type = "waveshare_3" ui.display.color = "black" ui.fps = 1 and everything should start up just fine, and work exactly the same. It won't let me post the actual URL here so i'll try and obfuscate it. githubDOTcom/wpa-2/pwnagotchi/releases
@jcreazy you got the v4 to work for you? That's awesome! I ordered a second waveshare after being unable to get the v4 working. I figured I'll downgrade and order the v3 since that seems to work better but found out it was a second v4 once it arrived in the mail so I said screw it and ordered it fully built online. The shop also had a bad usb cable for sale that saves all passwords to any device its connected to so I purchased that also. Now I have a complete pwnagotchi and enough materials to build 2 more if I ever get it figured out. If you don't have a printer and need a case for yours I could send you the link to the shop I bought mine at. They have cases for sale there as well.
Question I have a anbernic RG35XX H it’s a emulator capable up to psp it has two sd card slots I was thinking if I flashed the bios script files and all that jazz can I run this Pwnagotchi program on my device? 😅 how cool would that be huh 🤔
Just built mine thanks to ur help along the way also got Web ui working Just trying to get it to work over Bluetooth now changed ip and bt mac but nothing Any more videos with more handy plugins and new faces would be very helpful Thanks !
Can you share the links to where we can find the raspberry pi zero w, the battery system, and the box you created or bought to put the pwnagotchi in, please 🙏🏼
Hello, thanks for the video ! How do you check the battery level? I tried to set up the UPS HAT (C) plugin, but it shows me --%, and I couldn't find other ways to get the battery percentage.
It took me a lot of time to it make work (like 3 days XD), i didn't had image so i thought my screen was broken since i had ssh connection but couldn't get image. finally i realize (Didn't notice earlier XD my bad...) that the shared connection was the issue (couldn't pass from git pull cmd), try it a couple of times more and viola! worked like a charm (using waveshare v3 and pisugar 3).. thanks bro! amazing work there!
im having a issue running the bash script to get the v3 screen to work and no luck . how did you get past the git pull cmd mine keeps giving me a error
I've been trying for days, I followed everything here step by step and it all worked supposedly but my display still does nothing.... I wonder if I have a dud or something?
@@aaronmilliman7685 lucky I was just browsing. I forgot I commented elsewhere I found the fix, at least for me, it's really stupid - if you copy and pasted the json settings from the Internet into notepad some of the characters are improperly encoded so just type the json manually. It's a specific character, but I forget which one.
I've waited 30 min for pwnagotchi to pop up in device manager, to no avail. I've even hooked it up straight into a monitor and ran it off of a battery but it's stuck at "Update UTMP about System Runlevel changes." Could anyone help me out?
Could you help me to figure out what's wrong with my raspberry? Basically I've done everything just as you showed in your video but I don't see the green light on my raspberry while the first time turning on. When I was installing different os (such as kali for example) I could see the light and everything was I okay I guess, but here nothing happens when I connect it to my laptop through the USB, no new devices, no lights, nothing and idk how to solve it
Hey trying to follow the FTP portion of this guid. I’ve tried a few times making sure everything is just as it should be When I am in nano and try to save, when I press enter I just get the usb disconnect connect sound as a sort of denial sound and nothing progresses. It won’t let me save sshd_config file after the changes. Now I recognize it’s probably related to the read only permission, but I though the whole Sudo su thing and sudo before nano /ect/….. was supposed to give you write privlages Any idea why it won’t let me save the file? Ps I’m on W10 in power shell, the gotchi works and fires up all be it stuck in AI mode (but that’s another topic) and I started the unit via the jayoffellonys version. And used the wizard ect as per your most recent video. Not sure if that has anything to do with it.
Hey Sasquach will a pi sugar 3 work with this setup and what are the srew size sorry for the dumb questions im new at this any way love your content man keep up the amazing work
Are these backwards compatible? I just flashed mine to a much newer build and now my screen is spotted and not working, using a newer build with V3 when mine is Rev 2.1.
do you think you could make a video teaching us about putting plug in in it? like a battery percentage or things like that I really loved this video and I'm thankful for it!! would love to see more of it
I have a pwnagotchi i made a long time ago and it seems its got some image burn because i left it unpowered with a displayed screen on it for a long time, is there any way to fix this that you know of or am i going to have to tear apart my old printed case print a new one and get a new screen? Thanks lol
Also, would you by chance post the stl file for the case? I am not good at designing stuff like that yet for my printers. Would be great if you could post that on like thingiverse or something, Thank youuuuuuuuu
@@TalkingSasquach Thats hilarious thats the same one i used previously thought it was a diff one but didnt realise it had the thicker one that can fit the battery
Best timing dude! I follow you because of the Flipper Zero (great content btw) and when i started getting into the Marauder stuff and got stuck with some functions, you uploaded your walkthrough video just the same day. Two days ago i started building my first pwnagotchi and instantly ran into trouble getting the e-ink display to run. Now you upload the guide to my exact problem again. This is great! 😄 Thx!
Best timing ever. I just built mine 3 days ago and just realised as I'm using it headless, waiting for the waweshare to arrive, that I ordered a V3.
Remember if you flash the 1.5.5 it won't go into ai mode for whatever reason. A
workaround is to flash the previous version and enable bt tethering and have it auto update.
I recommend using 1.5.5FIX.
@@cyberspacemanmike 1.5.5fi doesnt work for me, first boot is good, but once it loads into AI mode, it just doesnt do much, sometimes it will just freeze up with status "Ai mode loaded" and other times it will load AI and just not detect any networks..
@@Alriskeke If you interrupt the initial startup it can corrupt the keys. Sometimes the initial startup will take 20mins or more in my experience. In general it takes a long time to boot.
@@cyberspacemanmike i tried leaving it for a full hour. Reflashed 5 times. Rpi0w, waveshare 3 & A2 quality sdcard.
Squatches guide in conjunction with flashing 1.5.3 and letting it auto update now works perfectly.
@@Alriskeke Hm IDK then, never heard of that happening. When did you buy the Pi? Glad it's working at least!
Lifesaver! Thank you for this! Was really struggling to find a clear resource for getting the V3 Waveshare screens to work. And here you are!
Spasibo tovarisch!
Thank you so much! I was able to finally make my own little guy this week!
I'm a noob and use a mac, but I couldn't have done it out without your video!
deer 2 was here aswell :P
Great vid Sasquacht (as usual) i cant wait on buying all materials 4 it
Have fun!
Thanks for posting this video I wanted a pwnagotchi so bad and I have no raspberry pi experience at all but after watching your video, gave me enough confidence to think that I could put together one of these. I got my raspberry pi and my waveshare 2.13 inch screen as-well as a sd card and within a half hour I had my lil pwnagotchi up and running thanks to your video. Thanks so much man you saved me over 200$ 💻 🎉 🔥
Hello, I bought a Raspberry Pi 2w but I couldn't find the right reference for the battery that works with it.
Could you tell me please when you first plugged it in the computer did you see any lights or you had to wait for that 30 min and after that you saw it?
Great guide! Thank you. Please do a video on plug-ins for the gotchi!
My v3 has been running since February. Really fun gadget.
great video, super easy to follow. really glad you made it for the v3 :D
thank you for your help, It took me awhile to get working as i have to manually copy the 6 files over, ps I have a V3 screen (as you probably guessed). Just wanted to say thanks. Keep up the good work.
If you are having trouble ftp'ing into your pwnagotchi you need to delete the "#" symbol in front of "permitrootlogin yes", it will fix the problem.
THANK YOU!!!
@@ppAmenqq Happy I could help!
THANK YOU!!!! I've spent a better part of a day trying to figure out why FZ won't connect to the pwnagotchi. FML
you're captain america dude!!!
Pwnagotchi AND Goosebumps? A true man of culture 👏
Thanks dude! you made this super easy :D
At around 11:30: I'm updating my config.toml to match, but when I restart nothing happens. In the FTP, it doesn't show the id_rsa.pub, id_rsa, or fingerprint files. Wondering if that's related to my issue. I tried following another guide as well with no luck. Wondering if my display was DOA and I'm grasping at straws?
Out of curiosity what 3d print did you use for the case?
Tysm 🙏
Great explanations, with that I was finally able to get it working
Thank you! I've been looking for a good tutorial
Glad I could help!
New favorite creator 🤝🏽
Thank you so much! I appreciate you!
More vids please !! Awesome project dude.
Thank you so much for your help!! got mine working with the V4 screen :D
How did you get it working? Did you change anything from the instructions here? I can't get my screen to work for the life of me.
@@ChrisDeger i did the same steps but changed al the py files with the right one from the bash link for the v4.
The bash files can be found in the guerilla step guide. Your v4 will work but keeps blinking then change the name in the config file from whaveshare 4 to 3. Let me know if it works for you!
@@MonPokiNL sorry so just so i understand you switched the config file to be the same as pwnagotchi/ui/hw/waveshare213inb_v4.py
file?
I ended up getting it working by using this video ua-cam.com/video/xY6cJHUl36I/v-deo.html
Excellent video!! I'm going to set one up in the next 3 weeks.
hey, umm my pwnagotchi will not pop up in the device manager. I’ve tried everything from redownloading the pwnagotchi image and re etching it to downloading multiple things. It will not show up in port com.
maybe your micro usb cable doesn't support data transfer
You’re always right on time
Glad I could help!
I haven't used the new Waveshare HAT+ Display on a Pwnagotchi, but it works great on my Bjorn using V4 settings. However, it is definitely an upgrade because the screen has noticeably higher contrast, and another even more important feature. It lacks the 8-pin connector, and because of the topography of the board, you can make the HAT+ Display and a Pi Zero 2 W incredibly thin. To take full advantage of this, you must remove the plastic from your headers, although this isn't the easiest task. I think I'm just going to use extra long hammer headers, remove them from the plastic so that I can insert them from the rear and not have to use a vise as I would otherwise. I will likely still need to solder them in place, probably from the top, and I will need a female connector or something to keep them aligned. Hopefully this goes well.
I’ve got everything done but when trying to run that bash script, I’m receiving unable to access git. Could not resolve host.
Usually means you don't have internet connection sharing working or you missed editing the DNS file
Nice straight forward vid. Would like to see the battery life display and the addition of a rtc
How did you get the IP address matching the gateway to stick? I cannot get this to work in Win 11, it kicks an error every time.
Sudo nano /etc/dhcpcd.conf
Set static ip?
Im live in Brazil ,the project are awesome.
Might have been answered already, but can you provide a link to the STL for the case you used, please!
Great tutorial men!
He there I have a waveshare V4 and was wondering if there was a bash script available to update the drivers to V4???
Same. My screen won't turn on
Hey can i ask where did you get the stl file for ur case? Can share the link?
Best tutorial so far thanks!!!!
Awesome video side note I have the v4 screen I just changed the name in the do fig file and ran the same bash script and go to go.
will this work with a v 4 screen?
I've tested it and yes it does, do it exactly the same, and use waveshare_3. dont try to use waveshare_4
this probably has already been suggested, but for changing display mode into dark/light you don't have to modify the scripts in the system files.
Use
"ui.invert = [true/false]" (one of them without the brackets)
in your config.toml instead
I'm have trouble getting my pwnagotchi to ssh in while I've got internet sharing active. I can connect through ssh when it's not active, but then I can't run the script to update the v3 drivers. I get a message when I activate internet sharing that the ip is changing and that other devices might lose connection, and I didn't see that here in the video. If anyone can help it would be greatly appreciated.
I am having the same issue
@TalkingSasquach do you know how to get around this?
@@tyskizee I'm going to retry the setup this weekend using Linux. Might be easier. I'll let you know if it's successful.
@@mr_fusion85 sounds good! Keep me in the loop! I'm going to tinker with mine some more tonight. That's the only step I'm missing to get my screen to work.
And once you get to step 5 in the xycl0se tutorial the bin file will work. Step 2.3 is CRUCIAL and so is making sure that the ip of your pwnagotchi is correct after sharing your network.
Love your videos!
Hey Sasquach Not sure if you were aware but you can detect Pwnagotchi's in action with Marauder by using the Pwn sniff. Also what is your Pwnmail address? Keep up the great work man !! (EDIT) Oh hey also there is a very nice battery bar indicator plugin that you can use the with PiSugar 2
amazing video i hope your doing well!!
Thanks! You too!
This thing looks so cool
the display didnt turn on :(
@@Peakyplumber faulty display?
Try hammer!
Womp womp(im sorry its my intrusive thoughs)
@@juliusdamanauskas662 ???
@@wilx2703 womp womp-is the definition of too bad too sad.
Lol, I struggled with this for way too long. Turns out I had fat fingered a couple things in the config.toml. Thank you for this video!
Awesome vid i want one !
Any idea if this process works for the V4 variant? Those seem to be the only ones available on Amazon and already ordered it. Any info would be appreciated. Thanks.
Did the v4 work?
@@ScottyP5947 not for me. Got all the way until the end when loading all the libraries and such from GitHub and it just wouldn’t pull the last few of them. I’m not a programmer or computer science person so I don’t really know why. In looking through the libraries or directories it was trying to download it said “Waveshare v3” a lot so I don’t know if that had something to do with it. Like maybe I need to be pulling different ones since it’s the v4. Been trying to find the v3 screen since and no luck. Bought 4 of them, all v4.
yes just name it waveshare_v3
Hi dude! want to thankyou about the video but I ask if you can help us with something: I saw some people and I have problems once we paste the bash code to make the V3 screen work... can you check this issue? Cheers!
Tried to build one. Bought recommended parts. I get no power to my display, and I don’t know if it is because the power board is not properly connected, the Pi isn’t working, or the display isn’t working. Too many variables. I am finding things a pain to use and figure out.
In windows power shell (cli) I tried at 12:38 pasting the raw file in power shell and I’m getting a “cp: cannot stat waveshare3.py: no such file or directory” after I changed it in the (config.toml) file in FZ….so idk 🤷
Having the same issue
Hello mate and Talking Sasquach, yeah I need to know where to buy this stuff online with good delivery pleas !!!
Great vid as always! Love the shirt. Damn now i have a man crush.
brother to brother i need some help
Hey So when I go to filezilla and the quickconnect it says Error: Auethentication Failed and Error: Critical Error: could not connect to server any help with this would be greatly thankful for
Struggling a little after following the video step by step my Pwnagotchi is not showing up when I connect to the pc. I have tried a few different cables and other Sd cards but nothing?
Has anyone else had any issue getting the gotchi to show up in device manager?
@@beeredupAt that stage now, did you fix it?
no still struggling to get it to show up as an RNDIS device I have added drivers etc and still no joy :(
@@aaronmilliman7685
New subscriber Squatch. What is the device to the left on your desktop? The thing underneath the white flipper zero?
Thanks for the video, What is the brown band around the end it doesn't show on the device i bought on Amazon. So Im a little lost you go from powershell into Linux?
can you make a tutorial on how to add plugins to the Pwnagotchi?
Failing to troubleshoot this in step 5 of guerilla. " Failed to connect to localhost port 1080: Connection refused" when trying to git pull.
TS said we must have missed internet sharing which I did (Ubuntu user). Did you find a fix yet?
@@aaronmilliman7685 Ignored it and flashed 1.5.5 fix instead. Still running into problems, just different ones.
I for some reason get bsod with any driver i try caused kernel something error any idea on how to fix that ?
multiple formats to the sd and two screens later, i still cant get this to work. everything is working under the hood, ssh operational, but screen does nothing so far.
Figured it out after about a month of tinkering lol
@@user-yw4tg7hz2dHow?
Getting Cannot resolve host name when trying to preform git pull 😢
Any idea what can i do about that?
Same here, have you found an option?
Amazon list seems broken, can you list items in description?
I updated it! www.amazon.com/hz/wishlist/ls/1JEQYXPTJKM82?ref_=wl_share
@@TalkingSasquach Thanks for updating it quickly 🤟🏼
Having trouble finding the device in device manager. I don't see anything pop up in those areas nor others...Anyone else run into this or know how to fix this so i can do the driver update?
Yep this is where I'm stuck too no pop ups
@PLAYINSKILSSRT I fixed this but honestly man I don't remember what I did im sorry D:
At that stage now, did you fix it?
@@PLAYINSKILSSRTAt that stage now, did you fix it?
@@aaronmilliman7685 I think I just opened them all and kept watching for one to pop up it took a while
Hey got a question I have a few cords an been waiting but nothing pops up or light don’t come on so that mean it’s not data transfer cable
at 8:12 in my ethernet properties in the sharing tab, i dont have the option to select a home networking connection, only the 2 check boxes. how do i fix this? the pwnagotchi has the right drivers and is an ethernet gadget, same setup as you. same problem occurs on wifi. whe i try to SSh in it says request refused but i can still ping it.
I've started marking the ports on the pi zero. I can never remember which is power. Might be a good case mod. A power symbol on the correct side. I just use a little sticker right now.
That's a great idea!
I’m having a issue running the batch script file to update the drivers for the v3 screen it just won’t take. Any tips will help thanks
Same here, did you find a fix?
@@aaronmilliman7685 @estevanrios7948 Any issues running the script are usually down to your Pi not having internet access or having DNS issues, so be sure to check the part of the video that covers Internet Sharing and / or DNS fixes (changing /etc/resolv.conf) ...
@TalkingSasquach Glad the script is helping folks. :)
Where is a link to the case?
Your mom
whatd you end up doung
@@Determinator21 that was not funny at all
@@user-jt1wl3tw1d not a joke
@@user-jt1wl3tw1dyeah but he replied with no manners 😂
People think they can just get stuff for free and be all bosses about.😅
Some people dedicate expensive time to put out nice things for everyone and people like that guy just asking like he deserves it.
So yeah 😂 his mom 😅
Amazon producr link is not working. Can someone help?
Hi, i am trying to connect to the server using file zilla and for some reason root as a username doest work... is there any way i can fix this
Sadly didn´t work for me =( somehow i don´t get the screen running. And i bought the Waveshare 2.13 Inch e-Paper Display HAT V4 i don´t know what i am doing wrong here...
With the Waveshare V4 you need to find the image 1.5.5 FIX. This should be the only modification that needs to be made to the config.
ui.display.enabled = true
ui.display.type = "waveshare_3"
ui.display.color = "black"
ui.fps = 1
and everything should start up just fine, and work exactly the same. It won't let me post the actual URL here so i'll try and obfuscate it.
githubDOTcom/wpa-2/pwnagotchi/releases
@@JasonsComputerCreations can't find it 😢
Does this also apply to the Waveshare V4? Im tryin my best to keep up with this tutorial but im worried its not gonna work after all of this?
The waveshare 4 works
@jcreazy you got the v4 to work for you? That's awesome! I ordered a second waveshare after being unable to get the v4 working. I figured I'll downgrade and order the v3 since that seems to work better but found out it was a second v4 once it arrived in the mail so I said screw it and ordered it fully built online. The shop also had a bad usb cable for sale that saves all passwords to any device its connected to so I purchased that also. Now I have a complete pwnagotchi and enough materials to build 2 more if I ever get it figured out. If you don't have a printer and need a case for yours I could send you the link to the shop I bought mine at. They have cases for sale there as well.
@@donvee1419 yes confirmed that the waveshare 4 works with the correct firmware. Which firmware are you using?
Question I have a anbernic RG35XX H it’s a emulator capable up to psp it has two sd card slots I was thinking if I flashed the bios script files and all that jazz can I run this Pwnagotchi program on my device? 😅 how cool would that be huh 🤔
8:44 in my Case there appears the Message Connection timed Out
But why ?
Just built mine thanks to ur help along the way also got Web ui working
Just trying to get it to work over Bluetooth now changed ip and bt mac but nothing
Any more videos with more handy plugins and new faces would be very helpful
Thanks !
Can you share the links to where we can find the raspberry pi zero w, the battery system, and the box you created or bought to put the pwnagotchi in, please 🙏🏼
Can you make a video with the Waveshare V4 please?
Sorry for the necro, but will this work with the Pi Zero W 2? Are there other solutions for running this on a Zero W 2?
This works just fine with Zero 2, you just need to use the 64bit version of the OS image instead of 32bit
Hello, thanks for the video ! How do you check the battery level? I tried to set up the UPS HAT (C) plugin, but it shows me --%, and I couldn't find other ways to get the battery percentage.
Link for Amazon list of products used is broken.
FileZilla ok to be using? Wasn't there a whole malware issue a while back?
It took me a lot of time to it make work (like 3 days XD), i didn't had image so i thought my screen was broken since i had ssh connection but couldn't get image. finally i realize (Didn't notice earlier XD my bad...) that the shared connection was the issue (couldn't pass from git pull cmd), try it a couple of times more and viola! worked like a charm (using waveshare v3 and pisugar 3).. thanks bro! amazing work there!
im having a issue running the bash script to get the v3 screen to work and no luck . how did you get past the git pull cmd mine keeps giving me a error
same issue here
Same issue here, tried with my w7 computer, will try at home with the w10
@@estevanrios7948 Same here, did you find a fix?
@@HamsterChef1 Same here, did you find a fix?
Great video!! Where did you buy the case?
He 3d printed it lol look behind him
Yup! www.thingiverse.com/thing:3920904
I've been trying for days, I followed everything here step by step and it all worked supposedly but my display still does nothing.... I wonder if I have a dud or something?
@TalkingSasquah isn't finding these messages.... we need you man.
@@aaronmilliman7685 lucky I was just browsing. I forgot I commented elsewhere I found the fix, at least for me, it's really stupid - if you copy and pasted the json settings from the Internet into notepad some of the characters are improperly encoded so just type the json manually. It's a specific character, but I forget which one.
any update?
Hello All, is there a way to add a GPS module and an enhanced WiFi antenna to greatly expand your pwning capabilities!?
I've waited 30 min for pwnagotchi to pop up in device manager, to no avail. I've even hooked it up straight into a monitor and ran it off of a battery but it's stuck at "Update UTMP about System Runlevel changes." Could anyone help me out?
Could you help me to figure out what's wrong with my raspberry? Basically I've done everything just as you showed in your video but I don't see the green light on my raspberry while the first time turning on. When I was installing different os (such as kali for example) I could see the light and everything was I okay I guess, but here nothing happens when I connect it to my laptop through the USB, no new devices, no lights, nothing and idk how to solve it
Thank you!
Can I use Rspi Zero 2 W for this project? I read a lot of unsuccessful attempts with Z2W model.
Hey trying to follow the FTP portion of this guid. I’ve tried a few times making sure everything is just as it should be
When I am in nano and try to save, when I press enter I just get the usb disconnect connect sound as a sort of denial sound and nothing progresses. It won’t let me save sshd_config file after the changes. Now I recognize it’s probably related to the read only permission, but I though the whole Sudo su thing and sudo before nano /ect/….. was supposed to give you write privlages
Any idea why it won’t let me save the file?
Ps I’m on W10 in power shell, the gotchi works and fires up all be it stuck in AI mode (but that’s another topic) and I started the unit via the jayoffellonys version. And used the wizard ect as per your most recent video. Not sure if that has anything to do with it.
Nice video bro!
Do you know, does this work with the V4 screen too?
Hi...
Does the Pisugar battery work with Raspberry Pi 2w? Thank you so much.
Anywhere you can just buy one?
i see them on etsy all the time some go for more than a flipper
Hey Sasquach will a pi sugar 3 work with this setup and what are the srew size sorry for the dumb questions im new at this any way love your content man keep up the amazing work
Did you have to sudo pip3 install numpy --upgrade To get AI to work or will it work fine using your tutorial??
what plugin is that running that's showing Mem CPU and Temp?
that is a magnificent beard sir . godspeed to you
Are these backwards compatible? I just flashed mine to a much newer build and now my screen is spotted and not working, using a newer build with V3 when mine is Rev 2.1.
do you think you could make a video teaching us about putting plug in in it? like a battery percentage or things like that I really loved this video and I'm thankful for it!! would love to see more of it
the bash script not working for me
Can't you rewrite the resolv.conf either?
I have a pwnagotchi i made a long time ago and it seems its got some image burn because i left it unpowered with a displayed screen on it for a long time, is there any way to fix this that you know of or am i going to have to tear apart my old printed case print a new one and get a new screen? Thanks lol
Also, would you by chance post the stl file for the case? I am not good at designing stuff like that yet for my printers. Would be great if you could post that on like thingiverse or something, Thank youuuuuuuuu
www.thingiverse.com/thing:3920904 here are a bunch of configurations to get you going!
@@TalkingSasquach Thats hilarious thats the same one i used previously thought it was a diff one but didnt realise it had the thicker one that can fit the battery
@@TalkingSasquach hey which in the that list did u use? just so i got the right one lol