What size spring did you use to replace the broken one? We discovered this as our problem but are not sure where to start to look for a replacement spring.
Hi Rachel. I actually have a container of salvaged springs and I seem to recall just trying different springs until one was close enough to work. Another option would be to remove the spring and take it with you to a hardware store and look for a replacement spring that is similar. I have also found assorted spring sets in most chain stores (they are usually where the screws and nails are). Let me know if that helps.
Yes, it is most likely the spring. If you are comfortable with a bit of DIY work then you can open it up and carefully replace the spring. I just used a random spring that was close to the original size and cut a bit of the extra length off. I really appreciate the feedback and you taking time to watch my video and post your comment! [Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list]
I tried a bunch of random springs until I found one that is close (it was not meant for this purpose). I think the one I ended up using was from a box of different size springs I got at the hardware store. I just had to cut a bit off to make it the right size.
i have a 2001 woody and it looks different. i need to change its coil as it exploded and now is a crazy tied up coil and need a new one. i cant find what size it is or its system on how to fix it. i have the harbo woody or something like that with the guitar from back in the day
Pull String Toy Repair? It's a slide show. Being a DIY channel and mentioning "Pull String Toy Repair" in the title, it would have honestly been of value to us to see "how" you supposedly fixed the spring. Looks to be a repeated question in the comments. Your answer's to these questions are interestingly vague. Springs are tricky.. Your run of the mill hardware stores most likely won't have delicate specialized springs such as this.. So lets say you did find just the right spring in your magic box of springs.. Showing the replacement process would have made for a truly helpful "DIY Video.." More questions than answers. Perhaps this particular DIY could have a few less gimmicky video effects and be a little more Dialed in. Cheers!
[So sorry for the delay... life kinda got in the way for a bit] Your comment is quite fair. In reality the video came after the repair... and was not originally intended to be a how to repair video until a friend asked me to put something out showing what it looked like. Since I had already returned the toy doll I could not go back to get additional images or video. Interestingly enough I actually found several springs that worked for this very purpose and simply picked one and cut it to size... it was literally just a brief trial and error to get the right fit.
I have a Woody doll clear from 1995. I put fresh batteries in him and he doesnt say anything. My only guess is that the Voice Box needs to be fixed or replaced. Is it easy to replace the voice box in a woody doll of that year?
Do you hear any form of a click or electric response type of sound? My first check on this would be to look at the speaker and speaker wires. That is an easier fix. If a wire is loose you can reattach it. You can test the sound board by using another speaker connected with clips to the sound board where the original speaker connects to see if it will make any sound. Also check to see if when the string is pulled the little piece of metal winds around far enough to complete the connection.
Hi, and thank you. With our Woody the spring doesn't LOOK broken, but maybe it is (and I simply do not know what I'm doing, admittedly???) The issue is that the string isn't retracting. Is that an indicator?
Good question. Does the string retract at all or is it stuck fully extended? If it goes back part way then it is likely the spring being stretched out over time due to use (not uncommon with pull string switches).
Is it possible for this toy to randomly talk on his own without string being pulled nor anyone around him? Get stuck on saying only part of a phrase 'hey howdy hey' when he talks on his own, but is able to go thru all phrases and the full hey howdy hey phrase when string is pulled?
Although I have not tried it there are options to consider (depending upon how handy you are). One of the problems allot of people comment about is that over time the string retraction slows which is due to the internal spring beginning to relax more and more. Aiding in the "relaxing" process by way of stretching could work or even changing the spring to one that is less stiff. How new is the pull string toy? If new, then it may slow on its own over time. I totally get a child wanting things to hit the right details. Hope that helps!
I'm so Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list. Ultimately I had done the same thing; I used a random spring from a bunch of assorted sized springs and cut to the length I needed. I really appreciate the feedback and you taking time to watch my video and post your comment!
The spring I used was from a box of assorted size springs I picked up at a hardware store. I tried a couple until I found one that was close to the original size (you may have to cut it shorter though)
Thanks so much for taking the time to watch my video and post a comment. I really appreciate it. Unfortunately I am not able to show a closer view because that was a fix I did for a friend.
Hi Faith, great question. Most of these are made from parts that can only be recorded on once. But... the part that "talks" is often called an IC Voice Chip, Sound Chip, Voice Module, etc. You can actually find them pre-recorded, recordable 1 time only or even re-recordable. Was your goal to make the same toy say something different or did you want to take the audio chip out to use for a different purpose?
Ok so! I am trying to recreate a toy from an episode of Spongebob called "The Magic Conch Shell" which is basically a Magic Eight Ball but instead of shaking it you pull a pull-string and it says different answers. So far, after a couple of hours of research, I've sorta formulated a base plan as to how I could do this. 1.) 3D print the exterior (since it's just two pieces of plastic seemingly glued together) 2.) I realized the chips in toys are mostly one use only but I figured that the ones in greeting cards aren't and found this: bigdawgsgreetings.com/product/bare-usb-push-200-sec/ 3.) Extract the pull-string mechanism from an old/broken toy 4.) Figure out some way to get the pull-string to work with the sound module. This is more of a dream project considering I'm not too well versed in electronics and engineering, but if you think it could work I'd be more than willing to try.
Excellent idea! I love it. Yes, that is totally doable. The pull string part completes a connection that serves as nothing more than a switch so all you would have to do is change that out for the switch connections on the sound chip (essentially just changing out the chip board). BTW, the chip you found looks perfect; 20 recordings that rotate each time you hit the switch, it has its own power source and speaker. If you try it, then I'd love to hear how it turns out!!!
FYI: I had also recently received a similar question on another video - ua-cam.com/video/NL3MjRS9Qus/v-deo.html. I went back and shared your info on that string too - I referred them to this chat to credit you for the cool find!
We have the same doll for my son and the pull string won’t wind up anymore. Taking him apart nothing looks broken but I have no clue how to get it to wind up.
Does the string not wind up at all or does it still have a little bit of winding effect left? If there is none, then I think it might be that the spring is not attached on one of the ends. See if that might be the case. If not, then see if you can see any kind of change or effect whey trying to pull the string.
Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list. You can replace the spring... I just used a random spring of similar size and cut off any extra so that it would fit. Thanks for taking time to watch my video and post your comment! [Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list]
Great video. I was wondering if there is a way to replace the string itself because my woody doll's string is too short and sometimes it doesn't work due to the string being small.
Thank you so much for the comment. Yes, you actually can replace the string just be careful when opening the box with the mechanism inside so that parts don't pop out. I would think that yo-yo string would be a great replacement option (lightweight but strong).
User tip (in case you weren't already thinking it): I like to take pics or video of things I've not taken apart before so I can reverse the process if something pops out that I was not expecting. If you get to try the fix I'd love to hear how it turned out!
Had not even considered where to try and find yo-yo string... I don't even know if I could find it easily in my area. Maybe a dollar store kind of place to pick up a cheap yo-yo that could be sacrificed for the string. Hmmm... I'm going to pay more attention to see if places have yo-yos.
Is it possible to switch a voice module? I’d like to replace an english woody voice for another one from another kind of woody.. what should i do? Thanks :)
Very doable to change the voice chip. This challenge is getting the replacement chip (I'm not sure where you could get one that is pre-recorded for this use). I have replaced sound chips in other devices using one that I can record on.
Do you repair Woodys as a business? I’m trying to find someone to repair no sound from box when string pulled. Been storing for 15 years with original batteries and one was corroded when I opened the compartment. I cleaned with baking soda, then vinegar but still no sound. I’m not tech enough to troubleshoot
When taking apart the voice box for my daughters woody doll, I see the metal piece that connects the speaker and wires has come disconnected from the speaker. Can I reconnect it with something that will allow it to still work? Or does it need a new speaker?
My daughters Jessie doll is the same setup and I tried to fix it by replacing the speaker but it’s the first time I’ve ever done that so I accidentally pulled the yellow string off and now I don’t know if that’s fixable, I also don’t know how to glue the wires to the speaker, do you have any advice? We would appreciate it so much!
Best way to fix the wires to the speaker is solder especially if there are no posts on the speaker. If you do not have that and the speaker has some posts to connect to then you can wrap the wire around the posts and try hot glue. Is the "yellow string" the main pull string? For the most part if you can pull something off then there should be a way to fix it... as long as nothing broke. Let me know if you needed more info! Thanks for watching!!
My son string is broken. I pull strong and now the cable is out and doesn't come back to his original place I dont know whats is wrong with it! Can some one help me.
Did the string come all of the way out (separated from the toy) or just won't retract all of the way. If there is no pull back at all then there is a good chance the spring inside is broken, like in the video. [So sorry for the delay... life kinda got in the way for a bit]
Hi! . My daughter gave a bath to her Woody, and it stopped working. I found out that the coil broke, but instead of replacing it, y fixed ir with that same shorter coil and it seems to be ok. My remaining problem is the sound. Woody now quacks when i pull the cord. :/. Could anyone help me find out what tondo next, please 🙏?
Hi! I bought some 90s Ren and Stimpy pull string toys. They do sound, but really fast, like an LP when turning the pitch too high. Do you think is it because of dead batteries? I'd like to know before surgery... thank you!
Very cool sounding purchase. Usually I hear these things slow down when the batteries are old. I wonder if the playback is tied to the movement of the string. If you stop the string as it is retracting does the playback stop?
Dialed In DIY had no idea about it! That's right, when pulling the string and then holding it, voice freezes until I let the string go to talk the rest of the quote 👍
Very interesting. Playback speed may be tied into the speed the string retracts. If that is the case, then the more you use the device the more the internal springs will get "broken in" and potentially reach the right sounding speed. Test idea: see if you can control the speed of playback simply by controlling the rate at which the string retracts (hope that makes sense... I'm a bit sleep deprived at the moment).
hi there again! yup, it works holding and slowly releasing the string... it sounds like you can awkwardly control the pitch depending on hoy you let the string be retracted.
I think that is actually good news then. Maybe the internal spring needs to be broken in a bit to get to the regular sound (i.e. perhaps Ren & Stimpy are wound a little tight and just need to relax...). If they all sound the same then I think that increases the odds that this is right.
That is a great question... and I am getting it allot lately. Unfortunately I do not know and I no longer have access to one to check. I used the old spring to gauge size of a replacement using random assortment of springs. It was not the exact same size but it still worked great!
Can you fix our toy Woody?? I tried opening up the pack and I can only get one screw loose. I think someone tried to fix him before (bought him used) and tightened the screws way way too tight.
Hi, I am happy to help in any way that I can. Please note that I do not have a means by which to do physical repairs but am happy to try and help figure out repair options to guide you if that would work for you. My first thought would be to look around the points where the screws are and see if you notice anything that looks like glue might have been added in the past. Next, do the screw heads look in good shape or have they been stripped?
Do you know what specific audio chip they used? I'm not sure if toys use their own custom chips built specifically for them or not. As far as I know all the Disney Store versions use similar chips
OH on top of that, do you know a way that would make the phrases said when the string retracts instead of when it's pulled? I have a voice box from another pull string toy I have that does just that and even has some sort of mechanism in it that makes the string retract slower, somewhat like an old Mattel pull string toy but it's electronic.
Great question. I actually do not know the actual chip used in these but pull a few apart and you will quickly start to notice some similarities. Usually similar size, similar contact points and the voice chip is under a dot which complete prevents hacking the recorded audio.
@@Aeiutube Another good Q! What I have seen on the type that activate on the "pull" is a metal trigger that completes a circuit which starts the audio. On the type that play on retract you can typically stop the audio by holding the string from moving. Old school toys like that had a form of plastic record/disc that spun like a vinyl record or CD. I have not seen any recent toys that work like that. I'd be curious to see what makes those work. Thanks again for posting and watching!
Toy Story 25th Anniversary Movie Accurate Woody Voice Boxes. Voiced by Tom Hanks Are a suitable replacement for Any Woody Doll missing there inner voice. Buy on eBay or Contact @Divinechild_creativerebellion@outlook.com/or on Instagram are now Sale Check Link Below www.ebay.co.uk/itm/363385150058?hash=item549b715a6a:g:7j0AAOSwVQhgU73-
Thank you so much for the comment. I don't have one to do any more work on for videos. The one in this video was one that I fixed for a friend. Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
Do you have something I can private message you on? My voicebox will not retract and I'd like to share images with you and ask for help. There was one loose part, and I'm not sure where to put it, so I'd like some help.
Hello Miles Away. I'd be happy to help in any way that I can. You can send to me via @gmail.com using "talk2DID" (sorry for the cryptic, separated email address... it helps to reduce it getting picked up by spambots).
I apologize... it has been a while since I did that project. I recall trying to duplicate the original set-up which required cutting down the new spring, stretching out an end, and then connecting it back in the doll with a loop or a hook. Not sure if that is helpful at all.
If it won't pull back at all, then it is most likely a broken spring. I just searched through an assortment of springs to find one similar. I cut it to the same length and bent the ends to match the old spring and it worked. To be honest, it was a little bit of trial and error until I got the right fit.
Also, if the pull string retracts some but not all of the way then the spring is likely starting to wear out (it can't coil back as tight). Hope this helps. Let me know if that was not the problem you are having. Oh, and I suggest taking pictures before you take things apart so you can see how they were put together originally. It has saved me many times!!
It will require some solder points if you are replacing the sound chip and keeping the original pull string set-up (I'm assuming the voice box/sound board is the same size). If the replacement board still has the speaker attached, and it works, keep it on there. Then all you have to do is solder the 2 wires coming in from the pull string box in the same places the old one was connected. Let me know if that works... or if you have any other questions. Thanks for watching my video!
That is a bummer! When you say that the wires are broken do you know, based upon watching this video, which wires they are (to speaker, to battery pack, to switch)? That will help me try to answer better.
With the release of Toy Story 4, I went ahead and pulled out my old 2001 Woody Doll. That thing has been beaten to hell, but I'm trying to clean it up a bit. When I was younger, I made the mistake of cutting random things off the doll, (his belt loops, a bit of his jacket...) and the horrific mistake of amputating his pull string. Until now, I had never bothered to actually open him up. I got his gear box out and everything, but there's one thing that confuses me. His pull string doesn't retract. It seems to go in reverse. I have no idea what happened when I cut it, but I'd imagine that would have damaged something. Anything worth mentioning here? I had an old 2001 Woody. Don't remember much about him , but he had a very offputting face compared to the newer ones. I believe this is the one I have, but I'm not too sure, since there were many different woody's that used the same body and face sculpt. I don't remember mine having any accessories. i.ebayimg.com/images/g/luoAAOSw6D9c8SD1/s-l640.jpg
I am assuming you cut off part of the pull string and the rest of what's left seems to work in reverse of what you'd expect. Is that about right? I'm wondering if the bit that was left somehow got wound back the opposite direction.
I have a Toy Story Jessie doll that I am trying to get fixed for my daughter. She's had it for a year and from the moment we got her the present she was not working. When we pull the string, she does not speak or say anything. Would it be possible to have her repaired?
That is such a bummer! There are a couple of things you should be able to check pretty easily if you'd like. First, check that the connections from the battery or battery pack are secure. Second, check the wires to the speaker. For both of these a simple fix of a loose wire is often all that is needed. Other than not speaking does it seem that the pull string seems to work ok?
I used a screwdriver to open up the voice box and had a look through the wires and everything seemed connected. I would pull the string and it also seemed fine. My daughter does have a Woody doll also, so I checked the batteries with both dolls and the Jessie doll still didn't work. I'm stumped as I'm not too knowledgeable with working on electrical things an soldering.
Glad you checked the batteries because I thought about that after I posted my previous reply. Since it appears wires and batteries are good then the next thing I check is the part that works like a switch to start the voice. In Woody, when the string is pulled, eventually the spring rotates enough to cause a metal piece on the spring to touch another metal piece (both have wires connected). This completes the circuit and allows power to flow which starts the voice/sounds. Can you see if those metal pieces are able to touch when the string is pulled?
@@DialedInDIY hi again and thank you for the responses. If you are referring to the metal piece that makes a half turn then makes contact with the other piece of metal then yes it does make contact with the other piece of metal. They are both making contact with each other. If I may ask, what would be the worst case scenario if that does not work? Is it possible that the voice chip could be damaged or defective beyond repair?
@@MannyChia Worst case? Yes, it could be the sound chip was defective from the start. You have checked the easiest options I can think of; batteries, loose wires & switch contact. What I would check next is an alternate speaker (even using one from an old head set); find where the original speaker wires connect and touch contacts for a different speaker to the same 2 points and see if it makes any sound. I would also want to check to see if power was going through the switch and speaker by using a basic multi meter.
I have been using the speakers from old headphones for replacement in toys as well as for other projects. The basic, over ear type are usually pretty close in size (the type that sit on the ear but not necessarily covering the whole ear). I hope that might be helpful. I appreciate you watching my video and posting your question!
Just taking a guess that the problem is a broken string or one that is about to break. My recommendation would be to replace the pull string with one that seems pretty much the same. Keep all of the other parts in place and simply wind a new one in the same direction the old string is wound. Does that make sense?
@@roxstar1004 Oh, got it. Sounds like it is something similar to the repair i did in this video. Is the spring broken but the string is ok? If you have not opened it yet then you likely cannot tell at this point. (Usually if the string won't go back in it is because the spring is broken or very worn out)
I used a salvaged speaker that I believe was from a smaller headphone set - I tried a couple to find the best fit within the available space. Thanks for watching the video and for the question!
Our Woody gets stuck saying "Oh give me a home.." Sometimes I'll remove the batteries a while and then he'll go on through other phrases, then he always gets stuck at that one again :/ Any thoughts?
I actually bought a box of various sized springs from a hardware store and I think that was where I got the one I used (I also have salvaged springs from things I've taken apart but they are similar in size to what I found at the store). Once I had a few options to compare to the original I just went with the one that was closest in size but I had to cut a little bit off of the end first. Does that help at all? Thanks for watching too!!
I wish I had the ability to do that but unfortunately I don't have the resources; I actually get asked this kind of question more often than I would have expected. Sorry. I am happy to give feedback on what you can do to try and fix it yourself if you'd like. Thanks so much for watching and taking the time to comment / ask your question.
I think the one I used was a spring that I got in an assortment of mini-springs from a hardware store. I just had to modify it a little bit to be the right size.
I had the chip device out of one of these that my cousin owned and he gave it to me because it didn't work. I got it working so I modded it so you touch the spring to the metal plate and it played one of six phrases: howdy partner, my name's woody, you're my favorite deputy, yee haw cowboy, there's a snake in my boots. My skills at the time were not great but if I tried it today I could fix it properly.
Very cool... thanks for the comment and for checking out my video. Its great that you got it working again... the first time I took something like this apart I ruined any chances of making it work again. But with time & practice the modding part gets to be pretty fun.
@@isayvaldenor1710 if the spring is tangled I'm guessing it came loose at one of the ends (or broke) and unraveled a bit. You may need to change the spring (I used a generic spring and just cut it down a bit to fit). does it seem like the spring is broken or just came loose?
@@DialedInDIY I guess it is a bit of both. Lol. Do you have an email where I could reach you? Perhaps I might send a short vid or pic of Woody's voice box 😅
This is all fine and dandy, but how do you fix an old school pull string toy (60's) ..... there are no batteries etc. Just some kind of mini record player.
Now there is a solid question and, unfortunately... I don't have a solid answer. I've not had the pleasure of working on one. If you figure it out, I'd love to hear about it!
If the speaker is not messed up then you could re-connect the wires. But, if the speaker is not any good then you can get a replacement speaker and connect it to the wires coming from the sound chip (how the old speaker was connected). I have salvaged and re-used a bunch of types of speakers; try old headphones, broken toys, etc. The biggest challenge is finding one close enough to the same size to fit everything back together. Does that help at all?
I used a spring from a hardware store. I had a box of assorted size springs I picked up and I just tried a couple until I found one that was close to the original size (you may have to cut it shorter though).
Thanks for watching an posting your question. I would be happy to try and provide some suggestions for you to repair it if you are comfortable trying that. Can you describe the problem that you are having?
Is your goal to make just the pull string switch using parts from scratch? If so, then do you have something it needs to fit inside? If I totally missed your idea just let me know... thanks for watching the video and for posting your questions.
Dialed In DIY correct! I wanna build a system like this from zero. So what I need to make one? I can find something to put all the meccanism inside. The second step is the recording chip, how I can make one? Please make a tutorial of how to do that! Is my dream to make one of this!
A bunch of good questions and a great idea. First, the recording chip would take some work to build the chip set BUT you can buy the ready to use chip set that you can use for recording and playback. I have seen them on Amazon, Digikey, and other sites. I will look into some options for putting a project like this together.
Hello, do you have a source for replacement boards? Here’s my testing below.. I’ve tested power to the board, 3.2V, power to the switch 2.5V and correct switch operation. Still no juice to the speaker, even when speaker open circuit. Kaput components or chip.
Sorry, I do not know of a source for replacement sound boards for original chip sets. There are sound chips that can record and replay that can be used if you can get original content. I'm guessing there is no power reaching the outbound leads from the chip to speaker (just in case it was the wires that were faulty).
Often if the string doesn't retract it is because of a broken spring (like the one in this video). If you pull on the string (even though it doesn't retract) will it make the voice work? That might help narrow down the issue a bit.
sorry it didn't turn out so well with Jessie. I sure hope you got the sledge hammer part on video :-) Actually, the hammer to [insert item of choice] idea is allot of fun and great for relieving frustrations. I am actually going to start doing some short vids on based on a similar idea because I had so much fun when I did it with "mice" in the video I posted a few months back. Thanks for watching and for posting your comment!!
i have a peewee Herman and a home alone kevin MCALLISTER PULLSTRING DOLL THEY BOTH HAVE THE SAME PROBLEM THE VOICEBOX YOU PULL STRING AND YOU CANT UNDERSTAND WHAT THERE SAYING ITS GIBBRISH WAY TO FAST WHO CAN FIX THIS FOR ME?
That is wild... sounds like there have been allot of pull string dolls w/that problem (Peter F. below had the same problem with a whole batch of them). Have yours always sounded like they do now? If you control how fast the string retracts (slow down the speed it retracts) does the sound change?
Sounds like you have the "Toy Story Collection" version of Buzz... I have not seen the inside of one of those so the best I can do is make some guesses. Let's take a closer look at the problem before anything is worked on. First, the head is supposed to move when he talks which means it is likely controlled by a chip that operates a small motor. If the voice still works but there is no movement then perhaps the battery is low but not dead (you may have already thought of this but have you tried new batteries?). Second, the springs for the wings... do you push the wings in and they usually lock in place? If yes, then does it still have some spring push back when you try to close the wing ? If yes, then there may be a loose or broken locking part.
Have you had a chance to check the batteries? That is one possible cause of the head being able to move at first but then stop. The wing sounds like it is catching on something inside which would require taking it apart and you may not want to do that unless you are very comfortable with doing that kind of work (because you may find more parts that are tough to put back once it is completely open). Does that make sense?
So the utility belt button triggers battery powered stuff right? Do any of the other buttons still work? My first thought here is a battery problem so I figure that is the easiest thing to check or rule out.
I am in the process of trying out different springs. I’m glad that I found your video. I really appreciate this. Thank you very much!
Thanks so much for taking the time to watch my video and post a comment. I really appreciate it.
I knew I should have paid attention to this video before.
This town ain't big enough for the two of us.
@@darthvader8001 I poisoned the watering hole.
Thanks Gabby Gabby... loved your roll in TS4!
@@DialedInDIY Aww gee you're welcome
Enjoy that working Voice Box. #Childhoodruinedagain
How do you re-spool the string? The string of my cousin's Jessie came undone and I am trying to fix it. Thanks!
I’m looking at your video,
as I find a woody from my shop yesterday,
that didn’t work with sound?
What size spring did you use to replace the broken one? We discovered this as our problem but are not sure where to start to look for a replacement spring.
Hi Rachel. I actually have a container of salvaged springs and I seem to recall just trying different springs until one was close enough to work. Another option would be to remove the spring and take it with you to a hardware store and look for a replacement spring that is similar. I have also found assorted spring sets in most chain stores (they are usually where the screws and nails are). Let me know if that helps.
My Woody’s pull string won’t go back in is there anything you would recommend?
Yes, it is most likely the spring. If you are comfortable with a bit of DIY work then you can open it up and carefully replace the spring. I just used a random spring that was close to the original size and cut a bit of the extra length off. I really appreciate the feedback and you taking time to watch my video and post your comment! [Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list]
Dialed In DIY no worries thank you!
I’m having a similar problem. Everything works except the pull string. Where do you get the replacement spring for this doll? Thanks
I tried a bunch of random springs until I found one that is close (it was not meant for this purpose). I think the one I ended up using was from a box of different size springs I got at the hardware store. I just had to cut a bit off to make it the right size.
i have a 2001 woody and it looks different. i need to change its coil as it exploded and now is a crazy tied up coil and need a new one. i cant find what size it is or its system on how to fix it. i have the harbo woody or something like that with the guitar from back in the day
Is it a spring type of coil or something different? Thanks so much for taking the time to watch my video and post a comment. I really appreciate it.
Pull String Toy Repair? It's a slide show. Being a DIY channel and mentioning "Pull String Toy Repair" in the title, it would have honestly been of value to us to see "how" you supposedly fixed the spring. Looks to be a repeated question in the comments. Your answer's to these questions are interestingly vague. Springs are tricky.. Your run of the mill hardware stores most likely won't have delicate specialized springs such as this.. So lets say you did find just the right spring in your magic box of springs.. Showing the replacement process would have made for a truly helpful "DIY Video.." More questions than answers. Perhaps this particular DIY could have a few less gimmicky video effects and be a little more Dialed in. Cheers!
[So sorry for the delay... life kinda got in the way for a bit] Your comment is quite fair. In reality the video came after the repair... and was not originally intended to be a how to repair video until a friend asked me to put something out showing what it looked like. Since I had already returned the toy doll I could not go back to get additional images or video. Interestingly enough I actually found several springs that worked for this very purpose and simply picked one and cut it to size... it was literally just a brief trial and error to get the right fit.
I have a Woody doll clear from 1995. I put fresh batteries in him and he doesnt say anything. My only guess is that the Voice Box needs to be fixed or replaced. Is it easy to replace the voice box in a woody doll of that year?
Do you hear any form of a click or electric response type of sound? My first check on this would be to look at the speaker and speaker wires. That is an easier fix. If a wire is loose you can reattach it. You can test the sound board by using another speaker connected with clips to the sound board where the original speaker connects to see if it will make any sound. Also check to see if when the string is pulled the little piece of metal winds around far enough to complete the connection.
Hi, and thank you. With our Woody the spring doesn't LOOK broken, but maybe it is (and I simply do not know what I'm doing, admittedly???) The issue is that the string isn't retracting. Is that an indicator?
Good question. Does the string retract at all or is it stuck fully extended? If it goes back part way then it is likely the spring being stretched out over time due to use (not uncommon with pull string switches).
same here if you pull the string it wont retract
Dialed In DIY ours is fully extended and will not retract. How did you repair your spring? Ours looks busted
Is it possible for this toy to randomly talk on his own without string being pulled nor anyone around him? Get stuck on saying only part of a phrase 'hey howdy hey' when he talks on his own, but is able to go thru all phrases and the full hey howdy hey phrase when string is pulled?
Any tips on make a slow retract pull string.?? My son is crazy for small details. String has to finish when the phrase is? Help!
Although I have not tried it there are options to consider (depending upon how handy you are). One of the problems allot of people comment about is that over time the string retraction slows which is due to the internal spring beginning to relax more and more. Aiding in the "relaxing" process by way of stretching could work or even changing the spring to one that is less stiff. How new is the pull string toy? If new, then it may slow on its own over time. I totally get a child wanting things to hit the right details. Hope that helps!
Where did you get the replacement spring?
NICKBICKEL1 I need the same thing. Where did he get it from!?
Chili Dog I took apart something else and used that spring.
I'm so Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list.
Ultimately I had done the same thing; I used a random spring from a bunch of assorted sized springs and cut to the length I needed.
I really appreciate the feedback and you taking time to watch my video and post your comment!
What kind of spring did you use to fix the Woody? I can't find a vendor that has one. Thanks for the assistance.
The spring I used was from a box of assorted size springs I picked up at a hardware store. I tried a couple until I found one that was close to the original size (you may have to cut it shorter though)
Awesome. Thanks.
Glad I could help. I'd love to know how it turns out for you if you find a spring to try.
Could you please show how and where to get the spring/ A closer view would help too. Thanks very much/
Thanks so much for taking the time to watch my video and post a comment. I really appreciate it. Unfortunately I am not able to show a closer view because that was a fix I did for a friend.
Where did you get the spring from?
Would it be possible to remove the audio chip and program it to say different things?
Hi Faith, great question. Most of these are made from parts that can only be recorded on once. But... the part that "talks" is often called an IC Voice Chip, Sound Chip, Voice Module, etc. You can actually find them pre-recorded, recordable 1 time only or even re-recordable. Was your goal to make the same toy say something different or did you want to take the audio chip out to use for a different purpose?
Ok so! I am trying to recreate a toy from an episode of Spongebob called "The Magic Conch Shell" which is basically a Magic Eight Ball but instead of shaking it you pull a pull-string and it says different answers. So far, after a couple of hours of research, I've sorta formulated a base plan as to how I could do this.
1.) 3D print the exterior (since it's just two pieces of plastic seemingly glued together)
2.) I realized the chips in toys are mostly one use only but I figured that the ones in greeting cards aren't and found this: bigdawgsgreetings.com/product/bare-usb-push-200-sec/
3.) Extract the pull-string mechanism from an old/broken toy
4.) Figure out some way to get the pull-string to work with the sound module.
This is more of a dream project considering I'm not too well versed in electronics and engineering, but if you think it could work I'd be more than willing to try.
Excellent idea! I love it. Yes, that is totally doable. The pull string part completes a connection that serves as nothing more than a switch so all you would have to do is change that out for the switch connections on the sound chip (essentially just changing out the chip board). BTW, the chip you found looks perfect; 20 recordings that rotate each time you hit the switch, it has its own power source and speaker. If you try it, then I'd love to hear how it turns out!!!
FYI: I had also recently received a similar question on another video - ua-cam.com/video/NL3MjRS9Qus/v-deo.html. I went back and shared your info on that string too - I referred them to this chat to credit you for the cool find!
Dialed In DIY Thanks for the help!
I still haven’t fix his pull string yet for couple years, I bought him together with Buzz both are from the first Toy Story. I still need help.
We have the same doll for my son and the pull string won’t wind up anymore. Taking him apart nothing looks broken but I have no clue how to get it to wind up.
Does the string not wind up at all or does it still have a little bit of winding effect left? If there is none, then I think it might be that the spring is not attached on one of the ends. See if that might be the case. If not, then see if you can see any kind of change or effect whey trying to pull the string.
I was playing normally and gently and the string snapped. What do I do?
buy a new one.
I was beating a table and my. Voice box broke
Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list. You can replace the spring... I just used a random spring of similar size and cut off any extra so that it would fit. Thanks for taking time to watch my video and post your comment! [Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list]
Great video. I was wondering if there is a way to replace the string itself because my woody doll's string is too short and sometimes it doesn't work due to the string being small.
Thank you so much for the comment. Yes, you actually can replace the string just be careful when opening the box with the mechanism inside so that parts don't pop out. I would think that yo-yo string would be a great replacement option (lightweight but strong).
*@Dialed In DIY* Thanks, I'll have to try it.
User tip (in case you weren't already thinking it): I like to take pics or video of things I've not taken apart before so I can reverse the process if something pops out that I was not expecting. If you get to try the fix I'd love to hear how it turned out!
*@Dialed In DIY* That's actually a good idea, I still haven't done so yet as yo-yo's are rare in my area for some odd reason.
Had not even considered where to try and find yo-yo string... I don't even know if I could find it easily in my area. Maybe a dollar store kind of place to pick up a cheap yo-yo that could be sacrificed for the string. Hmmm... I'm going to pay more attention to see if places have yo-yos.
Is it possible to switch a voice module? I’d like to replace an english woody voice for another one from another kind of woody.. what should i do? Thanks :)
Very doable to change the voice chip. This challenge is getting the replacement chip (I'm not sure where you could get one that is pre-recorded for this use). I have replaced sound chips in other devices using one that I can record on.
Do you repair Woodys as a business? I’m trying to find someone to repair no sound from box when string pulled. Been storing for 15 years with original batteries and one was corroded when I opened the compartment. I cleaned with baking soda, then vinegar but still no sound. I’m not tech enough to troubleshoot
Often times if the actual PCB gets corrosion the damage is irreversible
When taking apart the voice box for my daughters woody doll, I see the metal piece that connects the speaker and wires has come disconnected from the speaker. Can I reconnect it with something that will allow it to still work? Or does it need a new speaker?
You can reconnect the speaker. Soldering iron works best but you can also try to wrap the wire a bit and use hot glue.
My daughters Jessie doll is the same setup and I tried to fix it by replacing the speaker but it’s the first time I’ve ever done that so I accidentally pulled the yellow string off and now I don’t know if that’s fixable, I also don’t know how to glue the wires to the speaker, do you have any advice? We would appreciate it so much!
Best way to fix the wires to the speaker is solder especially if there are no posts on the speaker. If you do not have that and the speaker has some posts to connect to then you can wrap the wire around the posts and try hot glue.
Is the "yellow string" the main pull string? For the most part if you can pull something off then there should be a way to fix it... as long as nothing broke. Let me know if you needed more info! Thanks for watching!!
My son string is broken. I pull strong and now the cable is out and doesn't come back to his original place I dont know whats is wrong with it! Can some one help me.
Did the string come all of the way out (separated from the toy) or just won't retract all of the way. If there is no pull back at all then there is a good chance the spring inside is broken, like in the video. [So sorry for the delay... life kinda got in the way for a bit]
Hi! . My daughter gave a bath to her Woody, and it stopped working. I found out that the coil broke, but instead of replacing it, y fixed ir with that same shorter coil and it seems to be ok. My remaining problem is the sound. Woody now quacks when i pull the cord. :/. Could anyone help me find out what tondo next, please 🙏?
Hi! I bought some 90s Ren and Stimpy pull string toys. They do sound, but really fast, like an LP when turning the pitch too high. Do you think is it because of dead batteries? I'd like to know before surgery... thank you!
Very cool sounding purchase. Usually I hear these things slow down when the batteries are old. I wonder if the playback is tied to the movement of the string. If you stop the string as it is retracting does the playback stop?
Dialed In DIY had no idea about it! That's right, when pulling the string and then holding it, voice freezes until I let the string go to talk the rest of the quote 👍
Very interesting. Playback speed may be tied into the speed the string retracts. If that is the case, then the more you use the device the more the internal springs will get "broken in" and potentially reach the right sounding speed. Test idea: see if you can control the speed of playback simply by controlling the rate at which the string retracts (hope that makes sense... I'm a bit sleep deprived at the moment).
hi there again! yup, it works holding and slowly releasing the string... it sounds like you can awkwardly control the pitch depending on hoy you let the string be retracted.
I think that is actually good news then. Maybe the internal spring needs to be broken in a bit to get to the regular sound (i.e. perhaps Ren & Stimpy are wound a little tight and just need to relax...). If they all sound the same then I think that increases the odds that this is right.
What size spring is in the voice box?
That is a great question... and I am getting it allot lately. Unfortunately I do not know and I no longer have access to one to check. I used the old spring to gauge size of a replacement using random assortment of springs. It was not the exact same size but it still worked great!
Can you fix our toy Woody?? I tried opening up the pack and I can only get one screw loose. I think someone tried to fix him before (bought him used) and tightened the screws way way too tight.
Hi, I am happy to help in any way that I can. Please note that I do not have a means by which to do physical repairs but am happy to try and help figure out repair options to guide you if that would work for you. My first thought would be to look around the points where the screws are and see if you notice anything that looks like glue might have been added in the past. Next, do the screw heads look in good shape or have they been stripped?
What’s a better substitute for a battery
Do you mean different size battery or a battery substitute?
Do you know what specific audio chip they used? I'm not sure if toys use their own custom chips built specifically for them or not. As far as I know all the Disney Store versions use similar chips
OH on top of that, do you know a way that would make the phrases said when the string retracts instead of when it's pulled? I have a voice box from another pull string toy I have that does just that and even has some sort of mechanism in it that makes the string retract slower, somewhat like an old Mattel pull string toy but it's electronic.
Great question. I actually do not know the actual chip used in these but pull a few apart and you will quickly start to notice some similarities. Usually similar size, similar contact points and the voice chip is under a dot which complete prevents hacking the recorded audio.
@@Aeiutube Another good Q! What I have seen on the type that activate on the "pull" is a metal trigger that completes a circuit which starts the audio. On the type that play on retract you can typically stop the audio by holding the string from moving. Old school toys like that had a form of plastic record/disc that spun like a vinyl record or CD. I have not seen any recent toys that work like that. I'd be curious to see what makes those work. Thanks again for posting and watching!
Could you make a video how to fix a woody doll pull string pls i pulled mine and it broke
Toy Story 25th Anniversary Movie Accurate Woody Voice Boxes. Voiced by Tom Hanks
Are a suitable replacement for Any Woody Doll missing there inner voice. Buy on eBay or Contact @Divinechild_creativerebellion@outlook.com/or on Instagram
are now Sale Check Link Below
www.ebay.co.uk/itm/363385150058?hash=item549b715a6a:g:7j0AAOSwVQhgU73-
Thank you so much for the comment. I don't have one to do any more work on for videos. The one in this video was one that I fixed for a friend.
Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
Do you have something I can private message you on? My voicebox will not retract and I'd like to share images with you and ask for help. There was one loose part, and I'm not sure where to put it, so I'd like some help.
Hello Miles Away. I'd be happy to help in any way that I can. You can send to me via @gmail.com using "talk2DID" (sorry for the cryptic, separated email address... it helps to reduce it getting picked up by spambots).
Hi how did you attach the spring to the plastic coil piece as my original had some spring wrapped around a little notch.
I apologize... it has been a while since I did that project. I recall trying to duplicate the original set-up which required cutting down the new spring, stretching out an end, and then connecting it back in the doll with a loop or a hook. Not sure if that is helpful at all.
Thanks that makes a lot of sense!
Best of luck with the repair!
How can I fix the pull string, it won’t draw back and it’s exactly like yours.
If it won't pull back at all, then it is most likely a broken spring. I just searched through an assortment of springs to find one similar. I cut it to the same length and bent the ends to match the old spring and it worked. To be honest, it was a little bit of trial and error until I got the right fit.
Also, if the pull string retracts some but not all of the way then the spring is likely starting to wear out (it can't coil back as tight). Hope this helps. Let me know if that was not the problem you are having. Oh, and I suggest taking pictures before you take things apart so you can see how they were put together originally. It has saved me many times!!
do you know how to switch voice boxes with another woody
It will require some solder points if you are replacing the sound chip and keeping the original pull string set-up (I'm assuming the voice box/sound board is the same size). If the replacement board still has the speaker attached, and it works, keep it on there. Then all you have to do is solder the 2 wires coming in from the pull string box in the same places the old one was connected. Let me know if that works... or if you have any other questions. Thanks for watching my video!
Hi my Woody dolls wire are cut. Because my brother borrowed it and he said the wires are broken what should I use?
That is a bummer! When you say that the wires are broken do you know, based upon watching this video, which wires they are (to speaker, to battery pack, to switch)? That will help me try to answer better.
With the release of Toy Story 4, I went ahead and pulled out my old 2001 Woody Doll. That thing has been beaten to hell, but I'm trying to clean it up a bit. When I was younger, I made the mistake of cutting random things off the doll, (his belt loops, a bit of his jacket...) and the horrific mistake of amputating his pull string. Until now, I had never bothered to actually open him up. I got his gear box out and everything, but there's one thing that confuses me. His pull string doesn't retract. It seems to go in reverse. I have no idea what happened when I cut it, but I'd imagine that would have damaged something. Anything worth mentioning here? I had an old 2001 Woody. Don't remember much about him , but he had a very offputting face compared to the newer ones. I believe this is the one I have, but I'm not too sure, since there were many different woody's that used the same body and face sculpt. I don't remember mine having any accessories. i.ebayimg.com/images/g/luoAAOSw6D9c8SD1/s-l640.jpg
I am assuming you cut off part of the pull string and the rest of what's left seems to work in reverse of what you'd expect. Is that about right? I'm wondering if the bit that was left somehow got wound back the opposite direction.
Is it hasbro?
I have a Toy Story Jessie doll that I am trying to get fixed for my daughter. She's had it for a year and from the moment we got her the present she was not working. When we pull the string, she does not speak or say anything. Would it be possible to have her repaired?
That is such a bummer! There are a couple of things you should be able to check pretty easily if you'd like. First, check that the connections from the battery or battery pack are secure. Second, check the wires to the speaker. For both of these a simple fix of a loose wire is often all that is needed. Other than not speaking does it seem that the pull string seems to work ok?
I used a screwdriver to open up the voice box and had a look through the wires and everything seemed connected. I would pull the string and it also seemed fine. My daughter does have a Woody doll also, so I checked the batteries with both dolls and the Jessie doll still didn't work. I'm stumped as I'm not too knowledgeable with working on electrical things an soldering.
Glad you checked the batteries because I thought about that after I posted my previous reply. Since it appears wires and batteries are good then the next thing I check is the part that works like a switch to start the voice. In Woody, when the string is pulled, eventually the spring rotates enough to cause a metal piece on the spring to touch another metal piece (both have wires connected). This completes the circuit and allows power to flow which starts the voice/sounds. Can you see if those metal pieces are able to touch when the string is pulled?
@@DialedInDIY hi again and thank you for the responses.
If you are referring to the metal piece that makes a half turn then makes contact with the other piece of metal then yes it does make contact with the other piece of metal. They are both making contact with each other.
If I may ask, what would be the worst case scenario if that does not work? Is it possible that the voice chip could be damaged or defective beyond repair?
@@MannyChia Worst case? Yes, it could be the sound chip was defective from the start. You have checked the easiest options I can think of; batteries, loose wires & switch contact. What I would check next is an alternate speaker (even using one from an old head set); find where the original speaker wires connect and touch contacts for a different speaker to the same 2 points and see if it makes any sound. I would also want to check to see if power was going through the switch and speaker by using a basic multi meter.
THANK YOU! SO MUCH!!! MY WOODY CAN TALK NOW😃
You are very welcome. Thanks for watching and taking time to post a comment!!
I need to replace the speaker on the woody, where can i find one?
I have been using the speakers from old headphones for replacement in toys as well as for other projects. The basic, over ear type are usually pretty close in size (the type that sit on the ear but not necessarily covering the whole ear). I hope that might be helpful. I appreciate you watching my video and posting your question!
I would like to know how to repair the string
Just taking a guess that the problem is a broken string or one that is about to break. My recommendation would be to replace the pull string with one that seems pretty much the same. Keep all of the other parts in place and simply wind a new one in the same direction the old string is wound. Does that make sense?
@@DialedInDIY yes but is the pieces that make the sound when you pull doesn't work, the string doesn't go back
@@roxstar1004 Oh, got it. Sounds like it is something similar to the repair i did in this video. Is the spring broken but the string is ok? If you have not opened it yet then you likely cannot tell at this point. (Usually if the string won't go back in it is because the spring is broken or very worn out)
HOW DO YOU FIND A ANOTHER SPRING
Can you hack a talking Halloween skull that the mouth moves as it plays back?
What speaker do you use as a replacement
I used a salvaged speaker that I believe was from a smaller headphone set - I tried a couple to find the best fit within the available space. Thanks for watching the video and for the question!
Our Woody gets stuck saying "Oh give me a home.." Sometimes I'll remove the batteries a while and then he'll go on through other phrases, then he always gets stuck at that one again :/ Any thoughts?
Does it go longer without getting stuck if the batteries are new? If not, then I think there may be a glitch in the sound board / circuits.
Low voltage on the batteries so the IC resets back to it’s starting phrase.
Thank you guys, I had replaced with new batteries but they were store brand, name brand hooked him right up!
@@wendiborden6590 so glad it worked! Great news!!
where did you find an other spring????
I actually bought a box of various sized springs from a hardware store and I think that was where I got the one I used (I also have salvaged springs from things I've taken apart but they are similar in size to what I found at the store). Once I had a few options to compare to the original I just went with the one that was closest in size but I had to cut a little bit off of the end first. Does that help at all? Thanks for watching too!!
could I send one to you to fix and change the heads?
I wish I had the ability to do that but unfortunately I don't have the resources; I actually get asked this kind of question more often than I would have expected. Sorry. I am happy to give feedback on what you can do to try and fix it yourself if you'd like. Thanks so much for watching and taking the time to comment / ask your question.
I could do that if you still need
Mine is from 2009! I've passed it down to my toddler. The sound is very low so i think its time for a new speaker!
@dialed a I wanna build a system like this, can you help me?
Hi, sorry for delay in responding. Happy to help if I can. Tell me more about what you'd like to build.
Can you buy a small system like this, and load custom audio?
How you got a spring i want one😥
I actually found the spring from an assortment box I picked up at a hardware store. I had to cut it shorter to make it fit right.
where can I get a replacement spring?
I think the one I used was a spring that I got in an assortment of mini-springs from a hardware store. I just had to modify it a little bit to be the right size.
i always wondered what's inside of him!
I had the chip device out of one of these that my cousin owned and he gave it to me because it didn't work. I got it working so I modded it so you touch the spring to the metal plate and it played one of six phrases: howdy partner, my name's woody, you're my favorite deputy, yee haw cowboy, there's a snake in my boots. My skills at the time were not great but if I tried it today I could fix it properly.
Very cool... thanks for the comment and for checking out my video. Its great that you got it working again... the first time I took something like this apart I ruined any chances of making it work again. But with time & practice the modding part gets to be pretty fun.
can you help me fixing my Woody's pull-string? :(
I'm sure Benson can help.
hmmm... what appears to be wrong with it?
@@DialedInDIY string is not retracting, when I opened it to check, the spring inside is tangled. 😭
@@isayvaldenor1710 if the spring is tangled I'm guessing it came loose at one of the ends (or broke) and unraveled a bit. You may need to change the spring (I used a generic spring and just cut it down a bit to fit). does it seem like the spring is broken or just came loose?
@@DialedInDIY I guess it is a bit of both. Lol. Do you have an email where I could reach you? Perhaps I might send a short vid or pic of Woody's voice box 😅
This is all fine and dandy, but how do you fix an old school pull string toy (60's) ..... there are no batteries etc.
Just some kind of mini record player.
Now there is a solid question and, unfortunately... I don't have a solid answer. I've not had the pleasure of working on one. If you figure it out, I'd love to hear about it!
Hey help me please replace the speaker of woody it snapped off it is the same toy but i got the revised version
Is the speaker in good enough shape that you can re-attach it? Are the wires still attached to the sound board?
Dialed In DIY the wires are de attached
If the speaker is not messed up then you could re-connect the wires. But, if the speaker is not any good then you can get a replacement speaker and connect it to the wires coming from the sound chip (how the old speaker was connected). I have salvaged and re-used a bunch of types of speakers; try old headphones, broken toys, etc. The biggest challenge is finding one close enough to the same size to fit everything back together. Does that help at all?
Hey I have a broken woody doll and the spring inside it is broken. Where would be the best store to find new springs?
I used a spring from a hardware store. I had a box of assorted size springs I picked up and I just tried a couple until I found one that was close to the original size (you may have to cut it shorter though).
How can you repair mine
Thanks for watching an posting your question. I would be happy to try and provide some suggestions for you to repair it if you are comfortable trying that. Can you describe the problem that you are having?
Hi I wanna build a pull string meccanism from zero.. can you help me? Make a video tutorial pls
Is your goal to make just the pull string switch using parts from scratch? If so, then do you have something it needs to fit inside? If I totally missed your idea just let me know... thanks for watching the video and for posting your questions.
Dialed In DIY correct! I wanna build a system like this from zero. So what I need to make one? I can find something to put all the meccanism inside. The second step is the recording chip, how I can make one? Please make a tutorial of how to do that! Is my dream to make one of this!
A bunch of good questions and a great idea. First, the recording chip would take some work to build the chip set BUT you can buy the ready to use chip set that you can use for recording and playback. I have seen them on Amazon, Digikey, and other sites. I will look into some options for putting a project like this together.
Dialed In DIY You are amazing dude! Make it very durable in the time! I wil waiting your tutorial !
Any news ?
Hello, do you have a source for replacement boards?
Here’s my testing below..
I’ve tested power to the board, 3.2V, power to the switch 2.5V and correct switch operation. Still no juice to the speaker, even when speaker open circuit. Kaput components or chip.
Sorry, I do not know of a source for replacement sound boards for original chip sets. There are sound chips that can record and replay that can be used if you can get original content. I'm guessing there is no power reaching the outbound leads from the chip to speaker (just in case it was the wires that were faulty).
Anyone else look up pull string toy mechanism on UA-cam after watching Toy Story 4?
lol..me.. I'm curious how it works in toy story 4..this is modern mechanism
Have to admit... I even started thinking about it again (I saw it last week). What did you think of the movie?
I was thinking how that thing worked when they took out Woody's voice box
Right now I discovered that I need some tools to repair my 90’s Woody voice box :/
Sorry to hear Woody lost his voice. Hope you are able to fix it. Thanks for watching my video.
what to do when the string does not retract
Often if the string doesn't retract it is because of a broken spring (like the one in this video). If you pull on the string (even though it doesn't retract) will it make the voice work? That might help narrow down the issue a bit.
another thought... does the string retract at all? Just checking to see if it goes part way back in but then stops.
I tried fixing a really old Jessie doll I found on eBay, after like 9 hours is ended with a sledge hammer
sorry it didn't turn out so well with Jessie. I sure hope you got the sledge hammer part on video :-) Actually, the hammer to [insert item of choice] idea is allot of fun and great for relieving frustrations. I am actually going to start doing some short vids on based on a similar idea because I had so much fun when I did it with "mice" in the video I posted a few months back. Thanks for watching and for posting your comment!!
i have a peewee Herman and a home alone kevin MCALLISTER PULLSTRING DOLL THEY BOTH HAVE THE SAME PROBLEM THE VOICEBOX YOU PULL STRING AND YOU CANT UNDERSTAND WHAT THERE SAYING ITS GIBBRISH WAY TO FAST WHO CAN FIX THIS FOR ME?
That is wild... sounds like there have been allot of pull string dolls w/that problem (Peter F. below had the same problem with a whole batch of them). Have yours always sounded like they do now? If you control how fast the string retracts (slow down the speed it retracts) does the sound change?
This is not the 1995 one. The 1995 one uses AAA.
Ikr it looks like the 1995 one because its a bit chubby. That woody is actually the disney store woody
@@javiertorres8287 I took my Thinkway Woodies insides out coz it was a bit fat lol
@@sirpudding1581 same
i need you to fix my buzz lightyear toy
I would be happy to help see if you can fix it yourself if you would like. What is wrong with the toy?
His head stays in one place and the spring in the green wing is broken
Sounds like you have the "Toy Story Collection" version of Buzz... I have not seen the inside of one of those so the best I can do is make some guesses. Let's take a closer look at the problem before anything is worked on.
First, the head is supposed to move when he talks which means it is likely controlled by a chip that operates a small motor. If the voice still works but there is no movement then perhaps the battery is low but not dead (you may have already thought of this but have you tried new batteries?).
Second, the springs for the wings... do you push the wings in and they usually lock in place? If yes, then does it still have some spring push back when you try to close the wing ? If yes, then there may be a loose or broken locking part.
First the wing does not pop out completly and his head stops moving at the pharse ''i sense something look out (fires laser)''
Have you had a chance to check the batteries? That is one possible cause of the head being able to move at first but then stop. The wing sounds like it is catching on something inside which would require taking it apart and you may not want to do that unless you are very comfortable with doing that kind of work (because you may find more parts that are tough to put back once it is completely open). Does that make sense?
😎😎😎😎👍🏻
:-)
One Of My Springs Fell Off and I can't put it on again 😭
Oh no. Was it the pull cord spring (I assume)?
@@DialedInDIY What Happend is My Woody Dolls Pull string Got stuck and a bit of the spring fell
Oh, got it. I'm guessing one end of the spool freed itself and the spring wound out. Sorry to hear that.
Help me with my jessie toy it wont talk
What happens when you try to make it talk? Absolutely nothing, a little bit of sound, or maybe something more?
Where's phonograph?
Do you mean like the old toys that had plastic record-type audio players?
@@DialedInDIY Yes. I know that's a modern toy but it will be great to hear a voice from autentic record player.
@@grafgeorg8588 so true!
This is not what I asked Google. I asked how does it work. Not how to fix it after seeing the insides... SMH
i need some one to fix my baby girl woody doll
Do you know what is wrong with it? Maybe you can fix it yourself.
Dialed In DIY is the wire
Did the pull string come apart or is it the wire to the battery?
Dialed In DIY is where the string comes of apart
Dialed In DIY is where the string comes of apart
Can u repair my buZZ?
Hi toniback... I might be able to help depending on what is wrong with your buzz. :-)
Dialed In DIY I Bought one buZZ with utility belt but when I press the all bottom
It doesn’t work
So the utility belt button triggers battery powered stuff right? Do any of the other buttons still work? My first thought here is a battery problem so I figure that is the easiest thing to check or rule out.
Toy story 4 lies
Not very helpful