5:31 For those that want to do this but don't know how, you can, but you'll need a few things. -Wire -Wire stripper (you can use nail clippers. Just press on it gently, DONT CUT IT, then pull) - 2 pin JST Male and Female connectors with the right crimp terminals (measure the size and pitch of the JST from the kit) (the pitch is length between one contact center and the next) -crimping tool (you can use small long nose pliers; this will be a little tough but it'll do the job) -Soldering Wire/Lead -Soldering Iron steps: 1. strip both ends of the wires (just a small bit, let's say half a grain of jasmine rice. Why jasmine rice, you ask? idk in which part of the world you are but if you end up having basmati rice... well shit, just go 1/3 of that. I just made this unnecessarily long but fuck it), one end for the crimp terminals and the other for soldering to the male JST 2. Using one end of the stripped wire, crimp by using the crimping tool (or the long nose pliers) 3. Insert the crimp terminals into the female JST 4. Solder the other end of the wires to the male JST *(MAKE SURE OF THE PLACEMENT OF THE WIRES IF POSITIVE OR NEGATIVE BEFORE SOLDERING)* Easy lazy step (no JST required): Fuck everything and just cut in the middle of the wire of the kit. Strip both ends and extend it using the wire you have and solder it together
Why are things like this so hard to find at a good price? One would think that plastic toy makers would be all over this hole in the market. Oh well...what do I know? I'm just one of thousands who would buy many of these.
@@DX16 Something like this would be ridiculously cheap and easy to manufacture, even moreso without the LEDs. There isn't any complex manufacturing or engineering that goes into making a few flat plastic plates with a little sci-fi detail and some connection holes and pegs.
stuff is crazy. Action bases are like ¥500 in Japan, where I would easily buy one for almost every kit… Here they are like $10-$12. I’ve been considering ordering some off of Temu because it’s just that bad…
If you want something far cheaper but also essentially more bare-bones, apparently Daiso does sell modular hanger display sets for pretty cheap. Its rather small and can only fit normal HGs on its own, but it can join up with more of other ones on the X and Y axis, not so much the Z Axis though.
I have quite a few of these. Highly recommend. As far as I've tried, you can't connect more than two sets of lights together. So they'll be powered in pairs. As for stacking them, it's not possible out of the box, but I did upturn a pair to put on top of another pair, making a double height hangar. It fits PG.
A background choice might be a black sheet with pinholes or white LEDs. Give it that space station vibe. Maybe put some clear plastic in the holes to make it look like it's windows.
An easy way to do something like this with any base structure is to just use fairy lights. You can get them as battery-powered or USB, or sometimes both, and could even get them with different colors (red and yellow for warning lights and whatnot). Then just drill a few small holes into the structure and push the lights in through the back. Voila, lighted base.
Ah another nice vid to watch. Just built mg heavy arms (normal ver no extra accessories) was an amazing kit! Heavyams is one of my fav is not, my fav gundam I’ve see bc of all the artillery. Keep up the great work!
Given how these bases sell out so fast, clearly there's a market for it. I'm surprised Bandai hasn't taken the hint and made an Action Base Hanger with LEDs built in.
Oof... just snagged apparently the last one off of AmiAmi (uncolored)... Really want at least two like you have, but *shrug... you get what you can get... I'll hunt on my other usual shops and, if necessary, Buyee... Thanks for the review and heads up; awesome as always!
I wish I had the knowledge and money to make Gundam model displays and accessories to sell. I would make a kit of one of the ships per each series for gundam to be displayed in.
I bought a couple on your recommendation and am not as happy with it as you are. Leds are super bright with no diffusion so it is simply not pleasant to look at. And how are you supposed to power a bunch of these anyway.
Hey @mechagaikotsu, just wondering what your shelves/cubby holder things are that hold your godhand nippers and paints along the edge of your desk? Thanks
Hi mecha i know hg unicorn is absolute trash but can you make a really quick review on it? Wallet is kinda empty right now and i want to get something that looks somewhat decent on my shelf
Hey, didn't hear it in the video, and it probably doesn't matter for the painted version, but is this PS or ABS? Want to know if I'd be stuck using the pens or if a flow-tip would be safe.
@@DX16 I forgot but I think the whole thing is like over a thousand bucks. That said, it is sent in the form of 12 large kits that you recieve over the course of a year that you pay a smaller price for each box.
@@veerbadrekia fair point. But I saw that he did have one from a size comparison in a video from awhile back. Plus I wanna hear Mecha’s take on it too because I’m curious to see if he thinks of it as highly as I do
These are always out of stock because they are so cheap... compare to say the ones offered by Fext Hobby. Their Fext System linkable display sets for Macross and Transformers are like 46 EUR / 50 USD each.
I mostly agree, but I'm sure you can do something cool with equipment like Striker packs, Core Gundam armors, or the FA Unicorn's/Perfectability's weapons with a hanger display.
I dont use hangar display or even action stand, but stack my kits vanilla standing but arranged chest-to-chest/shoulder to shoulder due to limited space. And you will be too, if you buy at least one kit per week, and have more than 500 gunplas, and hundreds more of non gunpla mechs kit.
I usually do dynamic poses, but I don't agree. For example, a diorama in a maintence bay looks incredible, plus some kits just look better standing stoicly. Although, I do tend to prefer adding my own leds to kits and dios
5:31
For those that want to do this but don't know how, you can, but you'll need a few things.
-Wire
-Wire stripper (you can use nail clippers. Just press on it gently, DONT CUT IT, then pull)
- 2 pin JST Male and Female connectors with the right crimp terminals (measure the size and pitch of the JST from the kit) (the pitch is length between one contact center and the next)
-crimping tool (you can use small long nose pliers; this will be a little tough but it'll do the job)
-Soldering Wire/Lead
-Soldering Iron
steps:
1. strip both ends of the wires (just a small bit, let's say half a grain of jasmine rice. Why jasmine rice, you ask? idk in which part of the world you are but if you end up having basmati rice... well shit, just go 1/3 of that. I just made this unnecessarily long but fuck it), one end for the crimp terminals and the other for soldering to the male JST
2. Using one end of the stripped wire, crimp by using the crimping tool (or the long nose pliers)
3. Insert the crimp terminals into the female JST
4. Solder the other end of the wires to the male JST *(MAKE SURE OF THE PLACEMENT OF THE WIRES IF POSITIVE OR NEGATIVE BEFORE SOLDERING)*
Easy lazy step (no JST required):
Fuck everything and just cut in the middle of the wire of the kit. Strip both ends and extend it using the wire you have and solder it together
You could even go with ol (un)reliable twisty twist.
Why are things like this so hard to find at a good price? One would think that plastic toy makers would be all over this hole in the market. Oh well...what do I know? I'm just one of thousands who would buy many of these.
Lol, you think plastic toy makers look up to Gunpla ? They just do cheap things that are sold ten times the price.
And that kind of demand is the reason for the prices...
@@DX16 Something like this would be ridiculously cheap and easy to manufacture, even moreso without the LEDs. There isn't any complex manufacturing or engineering that goes into making a few flat plastic plates with a little sci-fi detail and some connection holes and pegs.
@@fattiger6957 Yes, but it would still be sold 50€ each. Because people would still buy them.
stuff is crazy. Action bases are like ¥500 in Japan, where I would easily buy one for almost every kit… Here they are like $10-$12. I’ve been considering ordering some off of Temu because it’s just that bad…
This is gonna look perfect with the coming 30MM Armored Core kits.
I’m so excited for those
If you want something far cheaper but also essentially more bare-bones, apparently Daiso does sell modular hanger display sets for pretty cheap.
Its rather small and can only fit normal HGs on its own, but it can join up with more of other ones on the X and Y axis, not so much the Z Axis though.
I have quite a few of these. Highly recommend.
As far as I've tried, you can't connect more than two sets of lights together. So they'll be powered in pairs.
As for stacking them, it's not possible out of the box, but I did upturn a pair to put on top of another pair, making a double height hangar.
It fits PG.
Turning them upside down is a great idea! Definitely going to grab a couple more
@@MechaGaikotsu you'll never have enough. I need more!
I think adding decals will really bring them to life. Some hazard stripes and big numbers.
I bought two of these and they are so nice, they look great. I got mine on HLJ, they were in stock so I had no issue getting them
mecha edging us with that NTReview
i hope they got a rgb options, i want the lights to blinking\fading Red like a warning incoming.
A background choice might be a black sheet with pinholes or white LEDs. Give it that space station vibe. Maybe put some clear plastic in the holes to make it look like it's windows.
An easy way to do something like this with any base structure is to just use fairy lights. You can get them as battery-powered or USB, or sometimes both, and could even get them with different colors (red and yellow for warning lights and whatnot). Then just drill a few small holes into the structure and push the lights in through the back. Voila, lighted base.
I dont want to admit it but damn, Narrative is beautiful
🤩 Absolutely stunning display, I need that LED base! 🚀
Ah another nice vid to watch.
Just built mg heavy arms (normal ver no extra accessories) was an amazing kit! Heavyams is one of my fav is not, my fav gundam I’ve see bc of all the artillery. Keep up the great work!
Imagine doing the IGEL equipment pack XD
Just a question if because im thinking of getting water slides where should I buy them
Super simple fix. Build both left format, place them next to each other, then rotate right one 90* to the right.
Bros just teasing us at this point.
I might pick these up for my Gundums and mechs.
I recently found a display stand at Daiso, and it's only like $2usd
You might be able to hold the clips on with the little black tape bits.
Could you take a look at the Exodia model kit if you haven’t already
I just ordered one off Buyee. Came to around $35 AUD before shipping.
There’s some up on HLJ if anyone is interested
Not anymore lol
@@blight1885 That's what dozens of people will do to any stock
Given how these bases sell out so fast, clearly there's a market for it. I'm surprised Bandai hasn't taken the hint and made an Action Base Hanger with LEDs built in.
@xxnike0629xx have you already hoarded BOXES of those bases/hangars?
@kevingarcia6746 that xxnike0629xx guy is actually a troll in Gunpla community
@kevingarcia6746 he has already banned in several Gunpla sites for example
@kevingarcia6746 some Gunpla UA-camrs such as rrobbert184 and Zaku Aurelius already banned him
@kevingarcia6746 for more info, you can ask the members of Gundam board in GameFAQs
Oof... just snagged apparently the last one off of AmiAmi (uncolored)... Really want at least two like you have, but *shrug... you get what you can get... I'll hunt on my other usual shops and, if necessary, Buyee... Thanks for the review and heads up; awesome as always!
There is panel lines on the cheek lines, but none on the rest of the kit
I wish I had the knowledge and money to make Gundam model displays and accessories to sell. I would make a kit of one of the ships per each series for gundam to be displayed in.
NARRATIVE IN THE HANGAAAAAR
Would this work for a perfect grade
Still waiting for you to review the MG Psycho Zaku Ver. Ka...
I am once again asking when, if ever, will you make your IBO gumdam frame custom
He’s made it, he just hasn’t done a showcase. He posted it on Instagram when the Berserk mangaka died
Gosh.... that Narrative Gundam is so beautiful... Better looking then the Unicorn ever could. So much more detailled...
still prefer the unicorn
@@xxDxxism I can understand why. The Unicorns tells us of pristine white prestige.
Not a fan of thee incomplete look. If they would make a complete armor version, I might get that
The design is literally less detail. I respect you're opinion on preference but the reasoning is stupid and just wrong
I can't get behind it lol. Love it conceptually as a middle point between Nu and Unicorn but my god is it butt ugly lol.
Chain bases and hangers are so damn cool
Can't find this anywhere. Buyee isn't for Saudi Arabia as far as I know.
I bought a couple on your recommendation and am not as happy with it as you are. Leds are super bright with no diffusion so it is simply not pleasant to look at. And how are you supposed to power a bunch of these anyway.
Hey @mechagaikotsu, just wondering what your shelves/cubby holder things are that hold your godhand nippers and paints along the edge of your desk? Thanks
Ordered it because your vid. Thank you!
How did you get such low noise low light video?
Please put in the Narrative video how to do an ab crunch
Just got myself a new God hand to help build My Narrative when it arrives
I think it is the same brand that makes the wireless led parts for Plamo.
Do you plan on getting other moshowtoys progenitor effect?
I’d love to see the rg Hi Nu or rg Sazabi in this hangar
I think Gundamit still has some in stock. I got two and love them
I just checked this costs so much more in my country. Around 38USD. Looks good though!
Are the holes in the walls 3 mm ?
Could you review the Amazing Strike Freedom, i think it looks great but i don’t wanna buy it and be disappointed
Can you pls review a gunpla related product called oyumaru? I think it's for replicating parts at home
Which one is the outro gundam?
Cant find it
Hi mecha i know hg unicorn is absolute trash but can you make a really quick review on it? Wallet is kinda empty right now and i want to get something that looks somewhat decent on my shelf
Honestly, I'd advise you to save some money to have the RG Unicorn.
Question are you going to review the demi Garrison
link doesn't work, when searching no results :c
Whats the first kit in the video?
speaking of cheap there are also those 100 Yen mecha hangar display sold at Daiso.
I think I need like 10 of these
This is only making me more impatient for the NT Gundam to arrive
Hope it doesn't stay backordered for long
Looks cool, but just checked my local prices. Everywhere near me lists them as 55-60 AUD, and they're all sold out anyway =O
Should’ve show us the unicorn to see if the Frame glowed within it
so glad i found these in japan
I got this message when i try to by. This item description matches one of our prohibited item keywords "モバイルバッテリー", so it cannot be purchased.
Hey, didn't hear it in the video, and it probably doesn't matter for the painted version, but is this PS or ABS? Want to know if I'd be stuck using the pens or if a flow-tip would be safe.
Honestly you should review the pre painted archangel hanger
He already has lol
Hey did you pre order your narrative I can’t wait to get mine
Yes, he says it all the time "preorder ASAP"
Although here (SEA) we can still get the knockoff version of chain base
Definitely going to have to hunt a couple of these down!
alternate title: narrative gundam ver.ka teaser
I cant find one..... Sadge
Benefit of having the tools for modifying a 3D printer setup, extending those wires would be a walk in the park.
@onebilly6581 Anything interesting to say ?
Nice gundam 👍👍👍
When the narrative ver ka review dropping MECHA???
Very Nice Gundam Display but i couldn't keep my eyes off the Narrative Gundam it looks sick.
This is gorgeous, I'm definitely picking one up! It's currently in stock at HLJ, so!
They look soo cool. Price is ridiculous too
Misread the thumbnail and thought he bought the narrative verka for 14$
Bro is really tempting us to buy 2 at this point 😂
Hey can u do a review of chogokin liger zero❤
Hey could you please review the absolutely enormous agora optimus prime model kit thats like 3 feet tall?
What's the price ?
@@DX16 I forgot but I think the whole thing is like over a thousand bucks. That said, it is sent in the form of 12 large kits that you recieve over the course of a year that you pay a smaller price for each box.
@@jeremiahsacks2868 But still, he'll never do that.
@@DX16 ah dang it. Would be really funny though since the thing is like 3 feet tall
@jeremiahsacks2868 How would he even review it ?
Day 35 of asking Mecha Gaikotsu to review the Sentinel Riobot Gurren Lagann
How about just watching the other reviews on UA-cam 😅
That is expensive 😬
@@Alpheaon I would know…
… I own one…
@@veerbadrekia fair point. But I saw that he did have one from a size comparison in a video from awhile back.
Plus I wanna hear Mecha’s take on it too because I’m curious to see if he thinks of it as highly as I do
@@Ejack69 that definitely would be nice but he will eventually get to it if you keep asking he is still setting stuff up
bandai has never heard of usb charging
Now throw in a bunch or random fences and poles
Its so cheap and it has LEDs and usb C???!! 🤯🤯
I bought 6 on HLJ
I see a Gyan Storm!
Sugoi display, a fine addition indeed. ;-;7
These are always out of stock because they are so cheap... compare to say the ones offered by Fext Hobby. Their Fext System linkable display sets for Macross and Transformers are like 46 EUR / 50 USD each.
Snip snip, heatshrink, extra wire. Soldering
$30 in the states
So, you’re just gonna show the narrative and not say a word about him, you do like keeping the hype up
I swear that review has been out already
@@MrEnKaye Not by mechagaikotsu
@@MrEnKaye just the unboxing
Hot take: hanger displays are just to make people feel less self conscious / more justified about displaying their mechas in vanilla standing pose
I mostly agree, but I'm sure you can do something cool with equipment like Striker packs, Core Gundam armors, or the FA Unicorn's/Perfectability's weapons with a hanger display.
I dont use hangar display or even action stand, but stack my kits vanilla standing but arranged chest-to-chest/shoulder to shoulder due to limited space.
And you will be too, if you buy at least one kit per week, and have more than 500 gunplas, and hundreds more of non gunpla mechs kit.
I mean, vanilla standing poses aren't bad.
Heck, some people fail at even posing standing poses and it is one of the most important poses ever.
I usually do dynamic poses, but I don't agree. For example, a diorama in a maintence bay looks incredible, plus some kits just look better standing stoicly. Although, I do tend to prefer adding my own leds to kits and dios
I mean my Wing kits are set up like that one standing shit of all the suits in the city
Fast as f boii
Im here
meanwhile in china....
lot of stock... 99 rmb... hahaha
bread
All you do is complain in every video you produce.
Fisrt
Isn’t on that site anymore 🥲
Third party hangars are better and there are more of them
More likes more love for you awe.