Man you are a life saver! I was panicking and about to fail my inspection. Have no energy or time to spend hours fixing the car. I can’t thank you enough!
This video Saved me removing the new windshield Cowell that I just installed on my W212 thinking I had disconnected something by mistake at the wiper motor. I was also looking for where the wiper fuse would be and it’s nowhere to be found. I Closed the door and hood and wipers work perfect. Kudos to you sir!
Omg...you are my hero right now. I was in the car lamenting the possibility of needing new wiper motor...opened and slammed the door and 🎉🎉🎉 wipers worked!
Thank you for this simple fix. I just detailed the engine compartment and then headed out to get the oil changed. First thing the tech asked me to do was pop the hood release, followed by “ turn your wipers on” That’s when I noticed the wipers not working. I just knew I got something wet and created a trip to the dealer ! I simply UA-cam search and there ya go. Fixed ! “Subscribed “
Lou, you are a God sent genius! I must've spent hours diagnosing the dam fuses and the relays. Finally I stumbled upon your UA-cam video and what solved the problem was closing the drivers door and the hood and vala.. it was a magic. Thanks a million and God bless!
Lou...... Put new wipers on my c class mercy... Not closed bonnet..... Just about ready go my rip off garage... Till I looked at your video.. Closed bonette wiper worked..... My garage would have taken me to the cleaners..... Fuse this motor that.... I love you Lou thank you so much... ❤
Good on you that you looked for information before just taking it in. Sadly I made this video because of those that have already thrown hundreds of dollars and days of time at this issue when its just a normal function.
Many thanks ! Car has been parked for months over winter, take it out for a 1km drive to pick up the mail, no wipers or washer. Got home and started to check, Mercedes didn't think it was a good idea to put a fuse chart in the owners manual like everything else. The chart is a piece of paper that comes in the toolkit, its a used car, no chart. Look online for that, find the fuse, its good. Find your video, Thankyou again ! I didn't have any msgs indicating the hood or door was open, but my hood switch can be flaky sometimes, re-close and msg would go away. The only other thing it might have been is I didn't put on my seatbelt the whole time. Closed the doors, did up the seatbelt, ffs, it worked. FFS.
And this is why I don't mind paying for ad free UA-cam. Just solved a problem that I thought was going to have to take the car to the garage, Thank you so much my friend, virtual beers for you!!
Na Fr bro I appreciate you 💯💯💯 You def fixed my problem, I panicked I thought my windshield wipers motor was done. It was jus the hood lol Thanks brother
Even if I close the hood, the car sometimes has the red hood error and that’s when my wipers don’t work. So I just have to repair the hood switch. Thanks!
wow, brother, the open hood indicator marked me and the solution was that the button did not press well, I just adjusted the sheet that flattened it and that's it! Thank you so much
Thank you Lou. I had just replaced the Passenger Wiper Arm, but did not fully close the hood. When I tried to turn on the Wipers, I got nothing! Thanks to your video, telling me to close the hood, the Wipers work! Thanks again. I “liked” the video, and will subscribe to your channel. I will also make a little contribution. GOD bless!
Tu es trop fort, ça fait 4 jours que je cherche pourquoi les essuie glace de mon camping car Mercedes ne fonctionne pas, capot ouvert !!! MERCI BEAUCOUP pour ta vidéo sur cette panne, et bonne continuation. Nono
Nah, if you don’t know, you dont know. 🙏. I work online diagnosing cars and this is a huge issue with people that work on Mercedes. So its easier to make a quick video than try to get them to understand what needs done. Often times when I tell them what to try they don’t believe me!
BINGO!! Youve just expalined why my wipers & washers dont work! I had a problem with my hood catches - get a warning hood is open when its not - just ignored up till now!😀 Thanks very much foryour insight!
Awesome man thank you so much. Fixed a loose wiper arm and the wipers were not working afterwards I thout it mite be an electrical issue lol. You saved me from some unneeded work.
Holy shit, that's hilarious, was fixing something else, and was like holy shit everythings breaking, was about to order a motor... Checked fuses and everything... Just had to close the hood and back to normal... Thanks man!
Ditto. Sat in tbe car.....hood latch gone... wipers not working....going to my parents oiver new yesr..... replaced sensir. Wipers now work agsin. Hale Lou. Thank you.... Mark. Bala, Gwynedd. UK
I use this trick when I’m changing wiper blades. I activate the wipers and as soon as they go straight up I pop the hood and it locks the wipers into that position.
Position one will not wipe in light to heavy rain, or will not stop like in position three. Position two is better just sporadic. New rain/light sensor, old one threw code for internal ground or short. Used Thinktool to code, no codes set. Maybe bad sensor?
Hello I saw one of your videos about the scanners I have a 1999 SLK 230 and I bought the Icarsoft mbii. I tried to reach out through the website that you use when you uploaded that video but it doesn't seem to work I was wondering if you could help me figure out if that's the right scanner for my car and what car it would be under for that scanner
@@MasterTechLou a different adapter than the one it came with? I just need help choosing the car type and what it's telling me. I guess understanding what its telling me
@@rebeccaperez5858 correct the adapter will go from the 16 pin rectangle to a round connector that goes to a round diagnostics port in the engine bay. Your model is a 170.
@@MasterTechLou Hello so I bought the adapter you were talking about but I keep getting ECU a fault in Communications even with the new adapter and I was wondering if you knew how I can get passes.
Hi Lou, an informative video as always! Thank you! What would cause a 05 S500 wipers to stop wiping in the "auto" position? - it works for a few times and just stops. once I turn off the wipers to the 0 position on the stalk, it starts back up. no issues on the constant and faster setting. could this be related to adaptions of the ran/light sensor?
Yes, this will either be a rain light sensor issue, or just adaptations of it if it has been changed recently. Same thing if the windshield has been changed, the rain light sensor need to coded to the windshield color. Thank you for the nice comments on my video. I appreciate it.
U have no idea how much this helped me. I fuckin sat here yelling going crazy like what da fuck it’s always something. Watched this video and realized that I did leave the hood cracked open, closed it and Wala 😓
Maybe bad pump or multifunction switch, if wipers come on but no spray when you pull the switch that means that pump may be bad check for power and ground at pump, there maybe 2 pumps one for headlights and one for wipers
Hey lu i just want to ask how do i get rid of the fault codes from doing a manual transmission swap on my clk350 they said that i need xentry or star on developer mode but can i do it with a cheaper scanner that i seen you review or do i have to use star or xentry and whats the cost for the recoding any help would be much appreciated 👍
Should just have to use a scanner that can read the central gateway and code it for manual transmission but im not 100% ive never had to do this personally.
@@MasterTechLou i had a feeling thats what it might need.can you more or less recommend a affordable scanner that can do the task? Again thank you for your time and i wish you and your family all the best 👍
@@MasterTechLou thank you it worked for the manual transmission can i ask you one more thing how do i adjust the rpm because now it only goes up to 5.500 rpm and before it was up to 6.250rpm???
My intermittent wipers don’t function. I move the selector and the wipers swipe one time and never again. I have a 2022 Sprinter 3500 (diesel). Any help is appreciated.
My wipers once turned on won't shut off even when turned off. Just replaced the turn signal switch and still doing it..only thing that stops it is opening door/hood or removing fuse
@@MasterTechLou sadly I was hoping that wasn't it as it's a much bigger expense. Also since i did my signal switch my ESP light is on and my wheel is out of alignment. Ugh
This isn't pertaining to this video, but there is no direct message link so here we are... First off, I have been L1 for 25 years and def know what I'm talking about with cars. That said F**K Mercedes. I have one of the most frustrating problems I've ever had to deal with stuck here at the moment and I have nobody to ask questions. I have 2016 Sprinter that ran off the road and tore out the def tank and a good portion of the harness. I rebuilt the harness and replaced everything but while I was doing it, the customer took car with spare key and returned it with the start counter on 1. I have Xentry but obviously cant do SCN programming because I have no access, so I borrowed a C4 and downloaded Vediamo and DTS Monaco. The SDConnect Toolkit sees the unit and Monaco launches and skips the 'where is your interface' screen so I know it sees it, but once I'm inside, it doesn't see it. I'm thinking maybe it is because it was zapped by MB and is bricked, but I don't know what the symptom of that having happened is and I cant see any clues on the screen of unit because the screen doesn't work. (Haven't tried pressing the check button on unit or anything while app is open because I never thought of that). Im running out of time and desperateAF. Now I am trying to decide if I should go buy this other guys shit laptop and his C6 which I imagine is also a clone (based on price), because apparently they are "turn key", but at that point it limits me to only Monaco and no Vediamo due to it being a C6 instead of C4. My questions are this. #1: Will Monaco do the trick on this Sprinter (906) . the reason I ask is because my Launch will actually clear a counter on zero on every other MB, but since this is a Sprinter, I don't even pick MB on Make screen and instead pick Sprinter and it wont do it. #2: Are you capable of doing it remotely through TeamViewer with any of the tools mentioned? #3: Does the C4 sound bricked? It has a check next to it in SDConnect toolkit but I don't know what its telling me because it is in German and #4: If I have the right Variant etc files, is the C6 and Monaco capable of fixing this problem? Thank You
Man you are a life saver! I was panicking and about to fail my inspection. Have no energy or time to spend hours fixing the car. I can’t thank you enough!
@@GeorgeLathem you just did ❤️
This video Saved me removing the new windshield Cowell that I just installed on my W212 thinking I had disconnected something by mistake at the wiper motor. I was also looking for where the wiper fuse would be and it’s nowhere to be found. I Closed the door and hood and wipers work perfect. Kudos to you sir!
spent two hours trying to track down wiper circuit Saw video and now it is working Thanks for this video
Same 😭😂😭
Omg...you are my hero right now. I was in the car lamenting the possibility of needing new wiper motor...opened and slammed the door and 🎉🎉🎉 wipers worked!
You can't imagine how grateful I am with your video…. THANK YOU!!!!
Thank you, the fact you reached out shows me, I appreciate you
Thank you for this simple fix. I just detailed the engine compartment and then headed out to get the oil changed. First thing the tech asked me to do was pop the hood release, followed by “ turn your wipers on”
That’s when I noticed the wipers not working. I just knew I got something wet and created a trip to the dealer ! I simply UA-cam search and there ya go. Fixed ! “Subscribed “
@@d.brekinridge5486 glad I could help.
Lou, you are a God sent genius! I must've spent hours diagnosing the dam fuses and the relays. Finally I stumbled upon your UA-cam video and what solved the problem was closing the drivers door and the hood and vala.. it was a magic. Thanks a million and God bless!
Glad it helped!
I did the same on my C300
Lou...... Put new wipers on my c class mercy... Not closed bonnet..... Just about ready go my rip off garage... Till I looked at your video.. Closed bonette wiper worked..... My garage would have taken me to the cleaners..... Fuse this motor that.... I love you Lou thank you so much... ❤
Donation comming your way when I work out how to do it....
Good on you that you looked for information before just taking it in. Sadly I made this video because of those that have already thrown hundreds of dollars and days of time at this issue when its just a normal function.
@@MasterTechLou thanks lou
THANK YOU! I changed the pump motor and was shocked when nothing worked as expected. First time someone gave me something I didn't know.
Many thanks ! Car has been parked for months over winter, take it out for a 1km drive to pick up the mail, no wipers or washer. Got home and started to check, Mercedes didn't think it was a good idea to put a fuse chart in the owners manual like everything else. The chart is a piece of paper that comes in the toolkit, its a used car, no chart. Look online for that, find the fuse, its good.
Find your video, Thankyou again ! I didn't have any msgs indicating the hood or door was open, but my hood switch can be flaky sometimes, re-close and msg would go away. The only other thing it might have been is I didn't put on my seatbelt the whole time. Closed the doors, did up the seatbelt, ffs, it worked. FFS.
Seatbelt has nothing to do with it just a door switch or a hood latch
And this is why I don't mind paying for ad free UA-cam. Just solved a problem that I thought was going to have to take the car to the garage, Thank you so much my friend, virtual beers for you!!
Glad to have helped!
Na Fr bro
I appreciate you 💯💯💯
You def fixed my problem, I panicked I thought my windshield wipers motor was done. It was jus the hood lol
Thanks brother
Even if I close the hood, the car sometimes has the red hood error and that’s when my wipers don’t work. So I just have to repair the hood switch. Thanks!
wow, brother, the open hood indicator marked me and the solution was that the button did not press well, I just adjusted the sheet that flattened it and that's it! Thank you so much
My man. How every UA-cam video should be. Thank you.
@@IKnowAGuyLLC not every. Just when it matters 😉
Thank you Lou. I had just replaced the Passenger Wiper Arm, but did not fully close the hood. When I tried to turn on the Wipers, I got nothing! Thanks to your video, telling me to close the hood, the Wipers work! Thanks again. I “liked” the video, and will subscribe to your channel. I will also make a little contribution. GOD bless!
Glad to help! I appreciate you.
Tu es trop fort, ça fait 4 jours que je cherche pourquoi les essuie glace de mon camping car Mercedes ne fonctionne pas, capot ouvert !!! MERCI BEAUCOUP pour ta vidéo sur cette panne, et bonne continuation.
Nono
❤️
Thank you man! I spent hours checking fuses, relays, then switch. I was about to replace the motors😂.
Same😂💔
@@dddkkk6329 😂😂😅
This should be one of the top videos, thank you sir. Just tried it and felt like a fool lol 😂😏
Nah, if you don’t know, you dont know. 🙏. I work online diagnosing cars and this is a huge issue with people that work on Mercedes. So its easier to make a quick video than try to get them to understand what needs done. Often times when I tell them what to try they don’t believe me!
Wow! Thank you so much. Hood was closed but not latched. All good now
Thank you so much you are the best. I just fixed a car just by looking at your video❤.
BINGO!! Youve just expalined why my wipers & washers dont work! I had a problem with my hood catches - get a warning hood is open when its not - just ignored up till now!😀 Thanks very much foryour insight!
Dude you saved me lots of headaches!!! LOL Thank you
Awesome man thank you so much. Fixed a loose wiper arm and the wipers were not working afterwards I thout it mite be an electrical issue lol. You saved me from some unneeded work.
Thats what I was hoping for! Glad to help and glad you looked for info before going at it!
Glad I found your post. You saved me a ton of time.
Main reason I made this video. Glad you seen it first!
Holy shit, that's hilarious, was fixing something else, and was like holy shit everythings breaking, was about to order a motor... Checked fuses and everything... Just had to close the hood and back to normal... Thanks man!
Thank you !!!! Wipers are back working
Yoooo!! My guy! THANK U THANK UUU!!!🙏🏿🙏🏿🙏🏿 ppl like u are such a blessing!!! Man im glad u shared i was stresssing!!!!
Glad I could help ❤️
Daaammm I spent 2 hours trying to figure out what was wrong. Thank you
Better than spending 3!! 😌
Ditto. Sat in tbe car.....hood latch gone... wipers not working....going to my parents oiver new yesr..... replaced sensir. Wipers now work agsin. Hale Lou. Thank you.... Mark. Bala, Gwynedd. UK
Glad it helped!
Bro, I know it’s been a minute but my sl500 was intermittently allowing wiper use. This helped. Let’s see what happens
Wiper stalk is next culprit if wipers sometimes dont work.
you rock brother !! worked like a charm!!
I had no idea my car did this - Thanks for sharing
I use this trick when I’m changing wiper blades. I activate the wipers and as soon as they go straight up I pop the hood and it locks the wipers into that position.
@@MasterTechLou I like that!
This just helped me Thank you 😊
WTHECK!!!
It worked. .
Thank You
Of course it worked thats why I made the video 😘😘😂
Thanks,I tried the first method and it worked 🙏🙏🙏🙏
2:01 Might be a dumb question. Does the windshield wipers need to be turned on,that aren’t working now, before you close the hood? Thanks!
Not a dumb question, doesnt matter if switch is on or off wipers will
Move to park if they were not parked
Thank you sir!!💯💯💯
Subscribed
Thanks for the sub!
Position one will not wipe in light to heavy rain, or will not stop like in position three. Position two is better just sporadic. New rain/light sensor, old one threw code for internal ground or short. Used Thinktool to code, no codes set. Maybe bad sensor?
Great help man. Awesome.
Thank you so much.. I had same problem about the wipers, solved becuase of you😊
Need advice on 200E mercedes one wiper doesn't work .old model . please give advice thanks
Wow , i can't believe it , thanks a million. 🥰
thank you I was about to go off the deep end in diagnostics
OMG, you star, it worked for me. I look like a genius now to the husband, thanks to you.
Hello I saw one of your videos about the scanners I have a 1999 SLK 230 and I bought the Icarsoft mbii. I tried to reach out through the website that you use when you uploaded that video but it doesn't seem to work I was wondering if you could help me figure out if that's the right scanner for my car and what car it would be under for that scanner
You need an adapter to plug into the round port in the engine bay on the passenger side.
@@MasterTechLou a different adapter than the one it came with? I just need help choosing the car type and what it's telling me. I guess understanding what its telling me
@@rebeccaperez5858 correct the adapter will go from the 16 pin rectangle to a round connector that goes to a round diagnostics port in the engine bay. Your model is a 170.
@@MasterTechLou Hello so I bought the adapter you were talking about but I keep getting ECU a fault in Communications even with the new adapter and I was wondering if you knew how I can get passes.
@@rebeccaperez5858 I cant tell you why because im not sure what youre picking for model or how you are using the scanner.
Hi Lou, an informative video as always! Thank you! What would cause a 05 S500 wipers to stop wiping in the "auto" position? - it works for a few times and just stops. once I turn off the wipers to the 0 position on the stalk, it starts back up. no issues on the constant and faster setting. could this be related to adaptions of the ran/light sensor?
Yes, this will either be a rain light sensor issue, or just adaptations of it if it has been changed recently. Same thing if the windshield has been changed, the rain light sensor need to coded to the windshield color. Thank you for the nice comments on my video. I appreciate it.
Omg 😂😂😂 you are a genius. 100 thanks 👌
U have no idea how much this helped me. I fuckin sat here yelling going crazy like what da fuck it’s always something. Watched this video and realized that I did leave the hood cracked open, closed it and Wala 😓
Thanks!
Dude, you saved me!!! thanks you!
Thank you man! I appreciate that!
Great video!!!!! ❤❤❤❤
Bro. This video 😂😂😂😂.... THANK YOU 😂😂😂
change both windshield wiper pump relay fuse and still they don't spray,
2003 mercedes benz ml320.
hoses are good!
any advice?
Maybe bad pump or multifunction switch, if wipers come on but no spray when you pull the switch that means that pump may be bad check for power and ground at pump, there maybe 2 pumps one for headlights and one for wipers
@@MasterTechLou thank you I will check both of them.
My wife's car 09 c250 cdi wipers just quit last week, also automatic lights don't work. Have changed sensor at rear view mirror but still nothing
Can you make are details explaination about wippers not working,mercedes benz e250
what year?
lol i bought a second hand w203 i thot my rear wipers dont work, thank you very much sir 🙏🙏
i dont have my hood lach on the left side u think that could be the problem??
Thank you, it did help
Hi Lou I have a 176 Mercedes washers spray just above wipers cleaned keys still no luck any ideas please
You can adjust them . With a pointy pick, they are small ball sockets and rotate easily. Stick the tip of the pick in the hole and you can adjust them
Hey lu i just want to ask how do i get rid of the fault codes from doing a manual transmission swap on my clk350 they said that i need xentry or star on developer mode but can i do it with a cheaper scanner that i seen you review or do i have to use star or xentry and whats the cost for the recoding any help would be much appreciated 👍
Should just have to use a scanner that can read the central gateway and code it for manual transmission but im not
100% ive never had to do this personally.
@@MasterTechLou i had a feeling thats what it might need.can you more or less recommend a affordable scanner that can do the task? Again thank you for your time and i wish you and your family all the best 👍
@@Optimus_leo matco, autel, launch, those should be the kind as long as they are bidirectional
@@MasterTechLou thank you lou and i look forward to more scanning video's from you have a great day 😎👍💯
@@MasterTechLou thank you it worked for the manual transmission can i ask you one more thing how do i adjust the rpm because now it only goes up to 5.500 rpm and before it was up to 6.250rpm???
My intermittent wipers don’t function. I move the selector and the wipers swipe one time and never again.
I have a 2022 Sprinter 3500 (diesel). Any help is appreciated.
Rain sensor is most likely not coded and or functioning properly is all I can suggest
This worked! Thank you
Life saver! Thanks
Thanks . Never thought of that . 🤔
Thank you for sharing 👌🏼
Thank you, I shut my hood and they worked,
Bro thanks!!! Worked .
You are a legend
Just checked and my trunk wasn't closed properly
You are a genius!!!
YOU ARE THE MAN!!
Good knowledge thanks
Thank you 👍👍
My wipers once turned on won't shut off even when turned off. Just replaced the turn signal switch and still doing it..only thing that stops it is opening door/hood or removing fuse
Your sam shorted and most likely has water or corrosion in it.
@@MasterTechLou sadly I was hoping that wasn't it as it's a much bigger expense.
Also since i did my signal switch my ESP light is on and my wheel is out of alignment. Ugh
Legend. Problem solved!
Great, practical advice.
Hey Lou, any chance you know the part number for the rubber seal that goes on the wiper shafts?? Should be 3 on the W220.. thanks man!
Thank you!
Merci beaucoup 🙏 🙏 🙏 🙏 Tanks
Big Thank you somehow my wasn’t shut🙏👍
I'm with every other person on this comment thread. Thank you. Freekin mercedez.....
just the job! from panic to sorted in 2 minutes.
Thank you Thank you Thank you!!!
Magical!!
Thank you
😅 that was a cheap fix just now!💪🏾👍🏾
Saved my fkin ass. THANK YOU!
Hell yea. Dumb shit happened to me working on a customers car.
Won't move in drive with hood open. Forgot if it's a BMW or Mercedes
THANK YOUUUUUU!!!!!
Life Saver
THANK YOU
Excellent video.Allah bless you
Great tips for sure. Thanks for sharing.
This isn't pertaining to this video, but there is no direct message link so here we are... First off, I have been L1 for 25 years and def know what I'm talking about with cars. That said F**K Mercedes. I have one of the most frustrating problems I've ever had to deal with stuck here at the moment and I have nobody to ask questions.
I have 2016 Sprinter that ran off the road and tore out the def tank and a good portion of the harness. I rebuilt the harness and replaced everything but while I was doing it, the customer took car with spare key and returned it with the start counter on 1. I have Xentry but obviously cant do SCN programming because I have no access, so I borrowed a C4 and downloaded Vediamo and DTS Monaco. The SDConnect Toolkit sees the unit and Monaco launches and skips the 'where is your interface' screen so I know it sees it, but once I'm inside, it doesn't see it. I'm thinking maybe it is because it was zapped by MB and is bricked, but I don't know what the symptom of that having happened is and I cant see any clues on the screen of unit because the screen doesn't work. (Haven't tried pressing the check button on unit or anything while app is open because I never thought of that).
Im running out of time and desperateAF. Now I am trying to decide if I should go buy this other guys shit laptop and his C6 which I imagine is also a clone (based on price), because apparently they are "turn key", but at that point it limits me to only Monaco and no Vediamo due to it being a C6 instead of C4.
My questions are this. #1: Will Monaco do the trick on this Sprinter (906) . the reason I ask is because my Launch will actually clear a counter on zero on every other MB, but since this is a Sprinter, I don't even pick MB on Make screen and instead pick Sprinter and it wont do it. #2: Are you capable of doing it remotely through TeamViewer with any of the tools mentioned? #3: Does the C4 sound bricked? It has a check next to it in SDConnect toolkit but I don't know what its telling me because it is in German and #4: If I have the right Variant etc files, is the C6 and Monaco capable of fixing this problem?
Thank You
🙏🏾🙏🏾🙏🏾🙏🏾
To many issues w/r350, brought tesla instead.
Cool
👍
Harlow bro
Thank you!