It surprises me how similar the MG Exia's engineering is to the Celestial Being MGs that came out recently From looking at it, all they need to do is update the exia to fit the frame and it'll work fabulously. A Ver 1.5 or a Ver Remaster like the new Doms where the exia just has a new frame parts would fit
I plan to buy this next month, hopefully it will be a good experience, I have only build 3 bootlegs and all of them were nightmares, I have only assembled rg freedom from Bandai but thats also a nightmare because I broke some parts😢😅
Yep MG Exia I remember that you had builded 1) HG Exia build and custom 2)HG Exia repair 3)RG Exia Trans am clear version MG Exia complete together with Other. MG 1) Dynames 2)kyrios 3) virtue
THE MG EXIA DOES NOT NEED A 2.0 It's a really good mg kit with some loose parts here and there, but it's nothing that nail polish can't fix. I actually find that Dynames and Kyrios have the same problem in certain areas, especially Kyrios. Seriously, this thing can fully replicate the kneeling pose from Setsuna's "This time. I will become a Gundam" scene.
Haha. I can solve the ankle and soles problem that is divided into three. However, it is a difficult problem for people who simply enjoy assembling. :)
Yup. It needs at least an action base as the feet needs to be modified. It's using the old MG hands which can get annoying when holding weapons. Removing the LED unit can be annoying as it has the tendency to disassemble inside the torso. Aesthetically, it's proportion is a bit different to the newer OO kits. Especially the thighs. The green clear parts are too dark for my taste and I can't paint it. In terms of build experience, there's a lot of jumping around runners and the chest stickers are terrible. Obviously, the Exia has inferior articulation but this is important for a CQC mobile suit. There are other older kits that need entire new molds than the Exia but it is obviously inferior to the newer Gundam OO kits.
Nice video! Just found out about you. What's the difference between this and the MG Exia Ignition Mode? (other than it has the Repair parts) Keep up the good work!
MG Exia dark matter was a nightmare to build after that, I never touch or pose the kit again but I need to find a time to rebuild it by using extra parts from dynames, kyrios, and virtue.
Ok, just finished building this kit and I just wanted to say that the mg Exia has received more hate than it deserves. It isn't a master piece, but if you take the time to tighten the joints you can get some great poses! If I may offer a small tip for the arms though, don't attach them completely. By leaving a little space between the arm/shoulder and the torso you give the shoulder armor more room to pivot upwards which will alleviate the gn ribbons pushing the arm down (though you should also tighten the arm for best results.)
@@unoriginalusername7178 unfortunately the new prints( or at least as far as mine goes) still had some pretty loose areas to tighten up. The feet needed a particular amount of love to fix their looseness as well as solve their "popping". Still I don't deny I probably dodged a couple bullets with the reprint, but I stand by what I said. Mg exia is a damn solid kit if you put a little extra love and patience into it.
@@eugeniahawkins4747 eh, i've dealt with fragile kits before so i'm used to it. Any less loose part at this rate is a relief for me since i don't have to bust out the notebook of techniques on tightening parts.
I just bought this kit and kinda worried about the review. But come to think about it it's a cool kit tho. Close range gundam are not common so I'm digging this one.
@@SDHOBBY what grade is better for 1st timers? I watched many of your videos in 15 hours its so satisfying to watch and gundam is my childhood dream figures
@@SDHOBBY im a new fan about 3 days ago but almost all in my history is about your video hoping for more subscribers to come, may i ask if how much is a MG? Ill just convert it in our currency here thanks for the info
@@SDHOBBY you were right :0 and a new problem I have not mentioned is when I'm placing the legs inside of the waist part one leg goes in but there's no room for the other peg am I missing something there?? The other leg just gets flimsy and falls out when I try to balance them both inside
hi! i just bought this kit last night. still not build it. but i saw some bad reviews about the arms and feet design. may you help me to describe whats happened? i really cant found it through the video. thanks man, appreciated! ❤
The problem with this mg are the ff: 1.bad hands. The weapons are a pain to hold. 2. The sword connectors are loose. 3. Bad feet design. Yes it can stand but the balance is an issue. 4. The neck thou. Its stationary. I hope Bandai's engineer give this kit justice. Or else bootlegs will certainly dominate.
도색을 예정하고있기에 스티커와 일부 파츠는 조립하지않았습니다. :)
Stickers and some parts were not assembled because they were scheduled to be painted. :)
15분간의 유쾌한 조립기.
매번 볼때마다 느끼는거지만 직접 손으로 만지고 조립하고 완성되는 건프라를 보는것 만으로도 재미있게 즐길 수 있게 해주셔서 진심으로 감사합니다 ㅎ
저도 매번 달아주시는 댓글 볼때마다 넘나 진심으로 감사하고 있습니다 ㅠㅠ
The MG Exia is always one of my favourites. The only issue is the joints, just tighten the joints and he rocks !!!
That's right. The chronic problem with this kit is joints. My ankles and soles are especially like that!
how to tighten the joints?
@@99betelgeuse use a clear nail polish my man
저는 파츠 하나 연결하는데도 한참을 조물딱조물딱 하는데ㅋㅋ 역시 전문가의 조립은 다르네요👍 컷팅부터 조립까지 넘나 깔끔하니 딱 집중되네요😍
편집해서 그렇지 저도 한참을 쪼물쪼물 하고있습니닼ㅋㅋㅋㅋㅋㅋㅋ 좋게 봐주시니 넘나 감사합니다!! +_+)/
It surprises me how similar the MG Exia's engineering is to the Celestial Being MGs that came out recently
From looking at it, all they need to do is update the exia to fit the frame and it'll work fabulously. A Ver 1.5 or a Ver Remaster like the new Doms where the exia just has a new frame parts would fit
I thought the same thing as you. :)
Well they need to milk the best out of Exia with MGEX anniversary limited edition Special Relese version later
I plan to buy this next month, hopefully it will be a good experience, I have only build 3 bootlegs and all of them were nightmares, I have only assembled rg freedom from Bandai but thats also a nightmare because I broke some parts😢😅
such an original editing style...
Yep MG Exia
I remember that you had builded
1) HG Exia build and custom
2)HG Exia repair
3)RG Exia Trans am clear version
MG Exia complete together with
Other.
MG
1) Dynames 2)kyrios
3) virtue
Thank you for always remembering me. :D
Nicely done. Hoping to get my hands on this kit soon
Thank you. :)
THE MG EXIA DOES NOT NEED A 2.0
It's a really good mg kit with some loose parts here and there, but it's nothing that nail polish can't fix.
I actually find that Dynames and Kyrios have the same problem in certain areas, especially Kyrios.
Seriously, this thing can fully replicate the kneeling pose from Setsuna's "This time. I will become a Gundam" scene.
Haha. I can solve the ankle and soles problem that is divided into three. However, it is a difficult problem for people who simply enjoy assembling. :)
My Dynames, Kyrios and Virtue don't face plant to the ground.
Can't say the same to my Exia RIII....
Yup. It needs at least an action base as the feet needs to be modified.
It's using the old MG hands which can get annoying when holding weapons.
Removing the LED unit can be annoying as it has the tendency to disassemble inside the torso.
Aesthetically, it's proportion is a bit different to the newer OO kits. Especially the thighs.
The green clear parts are too dark for my taste and I can't paint it.
In terms of build experience, there's a lot of jumping around runners and the chest stickers are terrible.
Obviously, the Exia has inferior articulation but this is important for a CQC mobile suit.
There are other older kits that need entire new molds than the Exia but it is obviously inferior to the newer Gundam OO kits.
@@wulf8889 My Dynames and Kyrios have done that a few times
Still looking for Virtue
@@wulf8889 Im still trying to hunt down 4 action base 1s in clear sparkle green
Nice video! Just found out about you. What's the difference between this and the MG Exia Ignition Mode? (other than it has the Repair parts) Keep up the good work!
The frame is made of metallic injection, and the blade of the GN sward is machined.
@@SDHOBBY Thanks, man!
Do you encounter any problem in this kit?? Or any annoying parts? Like joints or other moving parts
MG Exia dark matter was a nightmare to build after that, I never touch or pose the kit again but I need to find a time to rebuild it by using extra parts from dynames, kyrios, and virtue.
I really agree with that. If the 2.0 version of EXIA comes out, it will have to be based on the frames of dynames. :)
@@SDHOBBY totally agree
@@raidenyamashita2847 Thank you. :)
@@SDHOBBY no problem :D
Ok, just finished building this kit and I just wanted to say that the mg Exia has received more hate than it deserves. It isn't a master piece, but if you take the time to tighten the joints you can get some great poses! If I may offer a small tip for the arms though, don't attach them completely. By leaving a little space between the arm/shoulder and the torso you give the shoulder armor more room to pivot upwards which will alleviate the gn ribbons pushing the arm down (though you should also tighten the arm for best results.)
You're right. I just stand at attention after painting. :)
It might be because the original versions were pretty loose. Reprints like the one in this video solved the issue
@@unoriginalusername7178 unfortunately the new prints( or at least as far as mine goes) still had some pretty loose areas to tighten up. The feet needed a particular amount of love to fix their looseness as well as solve their "popping". Still I don't deny I probably dodged a couple bullets with the reprint, but I stand by what I said. Mg exia is a damn solid kit if you put a little extra love and patience into it.
@@eugeniahawkins4747 eh, i've dealt with fragile kits before so i'm used to it. Any less loose part at this rate is a relief for me since i don't have to bust out the notebook of techniques on tightening parts.
Can't wait for this
haha thank you friend :)
Yoooo!! This is my first fav gunpla also this video Its cool.
EXIA is a very popular kit. :D
Yeah I miss your hg exia build video.
a spectacular build as always.
Thank you. I really like Exia's appearance. :)
@@SDHOBBY if I got HG exia, then I would build it.
even in a new mold bandai spirits. it final assembly is still loose hips and ancles?
It's the same :)
@@SDHOBBY 😭
오우~ 이번에는 엑시아군요~ 잘보고있습니다!
감사합니다!! +_+
더블오 애니 정말 재미있게봤었는데...다시봐도 재미있는.... 1기 첫화 엑시아 등장이 생각나네용..
어우 생각난김에 또 정주행 해야겠네요 +_+
I just bought this kit and kinda worried about the review. But come to think about it it's a cool kit tho. Close range gundam are not common so I'm digging this one.
It's not a bad kit except for the soles of the feet.
Im planning to build my 1st gundam next month is it okay if i buy the barbatos first?
I really recommend the barbatos kit regardless of grade. :)
@@SDHOBBY what grade is better for 1st timers? I watched many of your videos in 15 hours its so satisfying to watch and gundam is my childhood dream figures
@@Trafalgar.05 For great satisfaction, I would like to recommend MG. Thank you for watching my video for a long time
@@SDHOBBY im a new fan about 3 days ago but almost all in my history is about your video hoping for more subscribers to come, may i ask if how much is a MG? Ill just convert it in our currency here thanks for the info
Relaxing 😁
Ha ha :D
Where did you buy the wood runner stand
This is a wooden dish rack that can be found anywhere on the Internet.
그냥 더블오 건담이랑 엑시아랑 퀀터랑 비슷해 보이는데 작중 더블오에서 파츠들만바꾸고 이름을 바꾼건가요?..
저도 잘은 모르는데요~ 아마도 빌드 시리즈라면 여러가지 건담들을 커스텀해서 특징을 붙인거라고 알고있습니다 +_+
how do you get the shoulders to go in?? at 4:15 mine won't go in the inside of the front bottom part is preventing it
Take a closer look at the manual. You may have set the wrong direction of the frame. :)
@@SDHOBBY you were right :0 and a new problem I have not mentioned is when I'm placing the legs inside of the waist part one leg goes in but there's no room for the other peg am I missing something there?? The other leg just gets flimsy and falls out when I try to balance them both inside
I have a question about this model. Is there anyway to put the forehead sticker behind the clear part?
Take a closer look at the manual You can attach it inside the clear. :D
@@SDHOBBY I actually don't have the manual. Just ordered this kit so I'm waiting on the mail XD. Thanks for the info!
Decals they came with besides foil stickers
I really Love Exia A Lot specially with sticker. I want to see the perfect version of exia with 00 Riser.
From: Philippines
Haha, I see. If I paint it later, I'll put on decals. :)
요즘 나온 더블오 1기 기체랑 같이 세워도 멋진 키트지만... 발목에 흠이 있는게 아쉬운 키트죠...
발목과 발바닥..아오 ㅠㅠㅋㅋ
hi! i just bought this kit last night. still not build it. but i saw some bad reviews about the arms and feet design. may you help me to describe whats happened? i really cant found it through the video. thanks man, appreciated! ❤
Maybe the reason they're talking is because of the mobility of the arms and the grip of the feet :)
I really want to see you build the mg 00 qan t.
I've made mg 00 qant full saber before. I'll paint it with that kit later.
I have a question about e12 idk where i goes on the kit
Please tell me :)
@@SDHOBBY e12 doesnt go anywhere on the kit idk what to do with it
we are the clear plastics?
have transparent parts.
Where's the gn wires on both arms?
I didn't assemble it because I'm going to apply it when painting :)
Where did you buy that blue logo bandai?
Which logo are you talking about?
they have cockpit ?
Yes~!
Hope this going to be a satisfying vid
I hope it was a satisfying video. :)
몸 조립한때왜 더블드라이브가 빨간색이죠?
선택해서 조립할수가 있답니다 +_+
이그니션 모드에만 있는 코팅 칼날이 없으니 뭔가 밋밋하네요...
어차피 도색할거라 크게 상관없습니다~ㅋ
살려고 하는데 어떠나요?
단순히 조립과 포징및 전시를 즐기시는 용도라면 추전드립니다~!
Nice build! I really wanted to complete my 00 kits. I've been thinking on buying this but I've seen some reviews on it. Is it worth it to buy?
It's worth it just by looking at its appearance. I'd like to recommend all the 00 series. :)
The problem with this mg are the ff: 1.bad hands. The weapons are a pain to hold.
2. The sword connectors are loose.
3. Bad feet design. Yes it can stand but the balance is an issue.
4. The neck thou. Its stationary.
I hope Bandai's engineer give this kit justice. Or else bootlegs will certainly dominate.
I agree with you. I'm waiting for the ver.ka version or 2.0 version of this kit. :)
@@SDHOBBY ah yes definitely. I really hope so.
이거 MG 2.0 버전이 나왔으면 좋겠습니다.
언젠가는 나오겠죠 ㅠ
@@SDHOBBY :: 건담 신에게 기도 :: ㅋㅋㅋ
@xxnike629xx It's just a shame that in the end, you'll also refuse to build them too...
Why? Because you're a *COWARD!* , that's why! hahaha
Can anyone that has the newer Blue Bandai Logo MG Exia kit tell me if the loose part problems are fixed out of the box?
Me
where's gn cables?
did not assemble with the paint in mind. :)
@@SDHOBBY ohh okay, anyways nice build
@@ChrisTian-sd5yq Thank you :)
@@SDHOBBY I will use this as basis for my MG Avalanche Exia
도색은 트란잠 ㄱㄱ!
고민중!ㅋ
GUNDAAAAAAAAAAAAM!!!
lol :D
You doing a really great job on your channel!! You need Promo-SM!!
Thank you! And I don't need Promo-SM. :)