Hi! Great review, thanks for sharing. I'm considering buying a Sculpfun S9, but I'm concerned about its long-term durability. Since your video was made a while ago, could you please share your experience regarding its performance over time? Has it held up well, and have you encountered any significant issues? Any insights would be greatly appreciated. Thank you!
Thank you, it is a basic machine, works stably with a common motherboard, it can be called "nothing to break" I have not had any problems with it. However, at this time, it is outdated compared to today's powerful and multi-functional machines. Based on your needs, choose the right one!
@@SDiYchannel01 hello so I was having an initial where the X axis rumbled to move left and right. Then X axis moved right to left but rumbled left to right. Now the X axis simply won’t move when trying to move it left and right
@@bllarose Hi friend, can understand that the driver for controlling the X-axis stepper motor is faulty. It is possible that replacing the main circuit board is necessary. Sorry can't help fix it for you!
Hi thank bạn. Lúc trước mc6c giá chỉ tầm 450k bộ nên hợp lý. Giờ tăng lên gần bằng FS i4 thì chọn i4 ok hơn, sóng rất ổn định. Chú ý i4 chỉ 4ch nên chỉ đủ chới cánh bằng cơ bản nhé!
Hi friend, because of the 0.08mm sharpness, it can engrave 9pt characters or less. However, at this point you need to set a small speed (about 400mm/min) to achieve the best sharpness.
Sorry you. I don't know yet what caused you to disconnect. But first you have to make sure your computer has ch340 driver installed. Then try to connect to the printer, wed cam .. see if the cause lies in the computer or in the S9!
@@aidamusic3092 If you have installed the ch340 driver, the software (eg lightburn) will accept the com port. You will need some setup for the first cut. For more details, please refer to the video on the official channel of sculpfun!
Hello, I’m having trouble with cutting into 3 mm acrylic gold mirror effect.. or it’s too low and only engraving, or it’s too high and melting the sheet.. can you help me with this? 😖
Hi friend, that is the disadvantage of laser diodes. With materials that are too bright, it will reflect. The material is transparent, it will pass through or be suppressed! So it only engraves or cuts well with dark acylic materials! (Sorry, I use translator)
@@SDiYchannel01 oh no so sad I bought this machine without knowing, for this project 😭 what do you think if I cover the acrylic protection sheet with a black paint ?
@@lindagursac6044 Hi friend, I guess that coating only works for engraving. It cannot be cut apart. It's a pity that the machine is not as effective as you expected...
@@SDiYchannel01Thanks for the quick reply. Why would dark Kraft depron work but regular (white) depron/foam board not? I have no experience with laser cutters so every bit of info is welcome ;)
@@TheWingeddrac0 Hi friend, that is the disadvantage of diode laser, due to the characteristics of wavelength and power. Dark materials will absorb light well, conversely light-colored materials will reflect light! with CO2 laser, cutting white depron will be very easy!
Wow! I’m making a decision now if I should buy this device. I've never used this before so I have the following questions. It would be great if I can have an answer here. 1. Can it be connected to a mobile phone? 2. Is there a menu in Thai/English/German? 3. To what thickness can acrylic/wood be cut? How far apart should they be placed? Is it mentioned in the manual book? 4. Can food be lasered to eat safely? 5. Can the laser level be adjusted? 6. Can the laser be applied to cylindrical objects such as glasses and water bottles? 7. I saw on an advertising that the area can be as large as 400*2000mm. Is it true? If so, what additional equipment would I need to purchase to make it work with such a large area?
Olá excelente o vídeo Eu comprei uma máquina igual E cortei um avião desse pra teste só que as peças não encaixa o rasgo ficou menor do que a espessura do MDF de 3 mm tem algum ajuste? Se vc puder me ajudar fico grato!
Thank you. Can you tell me how many cut layers you choose. For example, with a 3mm mdf, the basic parameters with the S9 will be 100% power, 600mm/min speed, 4 layers cutting. You should try !
Hi thank bạn! Mấy shop RC thì họ chỉ bán linh kiện chứ ko nhận ráp, vì ráp xong là vận chuyển rất khó. Chỉ có một số bác chơi rc lâu năm nhận ráp thôi, bạn lên mấy group trên FB như group "máy bay cánh bằng"... tham khảo nhé!
I bought this machine from Tech-Land store at aliexpress and got scammed:( machine is broken and they dont want to refund. They want me to fraud with the value of the machine with shipping so they dont pslay tax: i am not gonna fraud with tax. Now they banned me
I am very sorry for the problem you encountered. One device can't go wrong, but the seller's handling is terrible. I don't know the details of the incident. But you should send feedback to the homepage, and have them solve it. Hope you fix the device damage soon !
Great review video. I will buy one of this product.
Thank you. It will be very useful for your creations!
Bahi Konsa software SE chalta hai machine kise calye
Very very beautiful, thanks for sharing my friend 👍🤩
fully watched 👌
Thank you friend!
Hi! Great review, thanks for sharing. I'm considering buying a Sculpfun S9, but I'm concerned about its long-term durability. Since your video was made a while ago, could you please share your experience regarding its performance over time? Has it held up well, and have you encountered any significant issues? Any insights would be greatly appreciated. Thank you!
Thank you, it is a basic machine, works stably with a common motherboard, it can be called "nothing to break" I have not had any problems with it. However, at this time, it is outdated compared to today's powerful and multi-functional machines. Based on your needs, choose the right one!
acrylic sheet cutting ho sakta h ky
Us và eu plug nó khác nhau gì ko ad ?
Hi. Chỉ khác jack cắm nguồn thôi nhé bạn!
@@SDiYchannel01 ok bạn cảm ơn bạn nhé
Pak saya sudah instal software nya dan saya sambungkan ke sculpfun s9 tapi kenapa mesin tidak bergerak ya? Adakah solusi?
just by one I’m waiting for the delivery. Thanks.
А постоянное использование лазера на полную (100%) мощность со временем не испортит его?
Great Laser Engraving Machince bro! 👍
Thank you friend!
Hello can you help me please
@@Devilideas Hi friend
Is this 5W version?
Do you know anything about X axis trouble
Shooting? Or should I buy a new motherboard?
Hi friend, I have not had a problem with it, please describe the problem in more detail, if you know, I will help you fix it!
@@SDiYchannel01 hello so I was having an initial where the X axis rumbled to move left and right.
Then X axis moved right to left but rumbled left to right.
Now the X axis simply won’t move when trying to move it left and right
@@bllarose Hi friend, can understand that the driver for controlling the X-axis stepper motor is faulty. It is possible that replacing the main circuit board is necessary. Sorry can't help fix it for you!
Ka, apakah harus membeli software lightburn ya. Karena software lightburn saya expired
Amazing 👍
Có cắt được giấy bìa 180gsm hoặc 200gsm hoặc 230gsm ko ad. Sợ cháy giấy😢😢
Bonjour je souhaite comprendre pourquoi pas plus visuelle de paramètres pour vos différentes gravure et decoupe.
Máy này dùng ổn và bền không bạn. Nếu chẳng may hỏng có linh kiện thay thế không bạn?
What an advance technology laser machine and only a professional like you can assemble is so well keep it up
Anh review thử tx rx flysky fs i4 đi em thấy con đấy cũng ngang giá con mc6c nên phân vân quá
Hi thank bạn. Lúc trước mc6c giá chỉ tầm 450k bộ nên hợp lý. Giờ tăng lên gần bằng FS i4 thì chọn i4 ok hơn, sóng rất ổn định. Chú ý i4 chỉ 4ch nên chỉ đủ chới cánh bằng cơ bản nhé!
@@SDiYchannel01 ok cảm ơn anh
How small the character this machine engrave? Can it engrave 9pt characters?
Hi friend, because of the 0.08mm sharpness, it can engrave 9pt characters or less. However, at this point you need to set a small speed (about 400mm/min) to achieve the best sharpness.
@@SDiYchannel01 Thank you for your reply.
My friend wants to ask. My laser machine can't connect to the computer. How do I fix it.i have sculpfun s9 too
Sorry you. I don't know yet what caused you to disconnect. But first you have to make sure your computer has ch340 driver installed. Then try to connect to the printer, wed cam .. see if the cause lies in the computer or in the S9!
what if i use lightburn
@@aidamusic3092 If you have installed the ch340 driver, the software (eg lightburn) will accept the com port. You will need some setup for the first cut. For more details, please refer to the video on the official channel of sculpfun!
I want a link
Hello, I’m having trouble with cutting into 3 mm acrylic gold mirror effect.. or it’s too low and only engraving, or it’s too high and melting the sheet.. can you help me with this? 😖
Hi friend, that is the disadvantage of laser diodes. With materials that are too bright, it will reflect. The material is transparent, it will pass through or be suppressed! So it only engraves or cuts well with dark acylic materials! (Sorry, I use translator)
@@SDiYchannel01 oh no so sad I bought this machine without knowing, for this project 😭 what do you think if I cover the acrylic protection sheet with a black paint ?
@@lindagursac6044 Hi friend, I guess that coating only works for engraving. It cannot be cut apart. It's a pity that the machine is not as effective as you expected...
What the name of Wood? you use for making a plane
Thank you, I use 2mm thick plywood!
Nice video, have you tried foam board or depron with this machine? I might buy it if it can cut that.
Keep it up!
Hi friend, white porous materials will be difficult to cut by laser diode. It will cut dark kraft depron!
Hello friend can you help me my new UA-cam channel interesting videos but you are fun time visit most important for me
@@SDiYchannel01Thanks for the quick reply. Why would dark Kraft depron work but regular (white) depron/foam board not? I have no experience with laser cutters so every bit of info is welcome ;)
@@TheWingeddrac0 Hi friend, that is the disadvantage of diode laser, due to the characteristics of wavelength and power. Dark materials will absorb light well, conversely light-colored materials will reflect light! with CO2 laser, cutting white depron will be very easy!
Wow! I’m making a decision now if I should buy this device. I've never used this before so I have the following questions. It would be great if I can have an answer here.
1. Can it be connected to a mobile phone?
2. Is there a menu in Thai/English/German?
3. To what thickness can acrylic/wood be cut? How far apart should they be placed? Is it mentioned in the manual book?
4. Can food be lasered to eat safely?
5. Can the laser level be adjusted?
6. Can the laser be applied to cylindrical objects such as glasses and water bottles?
7. I saw on an advertising that the area can be as large as 400*2000mm. Is it true? If so, what additional equipment would I need to purchase to make it work with such a large area?
Bạn ơi bản khắc máy bay bạn lấy đâu vậy
File tải trên 3axis.co nhé bạn!
Great idea
keep working and make new things from your videos
Thank you!
Hello friend can you help me please my new channel
What is price for Light Burn software?
Thia machine can be cut acrylic products and plastics
Olá excelente o vídeo
Eu comprei uma máquina igual
E cortei um avião desse pra teste só que as peças não encaixa o rasgo ficou menor do que a espessura do MDF de 3 mm tem algum ajuste? Se vc puder me ajudar fico grato!
Thank you. Can you tell me how many cut layers you choose. For example, with a 3mm mdf, the basic parameters with the S9 will be 100% power, 600mm/min speed, 4 layers cutting. You should try !
Sao gần đây thấy a đăng ít video quá, theo dõi xem a đã lâu
a có gợi ý nơi nào build sẵn máy bay cho mình k ạ, cảm ơn a
Hi thank bạn! Mấy shop RC thì họ chỉ bán linh kiện chứ ko nhận ráp, vì ráp xong là vận chuyển rất khó. Chỉ có một số bác chơi rc lâu năm nhận ráp thôi, bạn lên mấy group trên FB như group "máy bay cánh bằng"... tham khảo nhé!
@@SDiYchannel01 cảm ơn anh, chúc anh nhiều sức khỏe ra nhiều video build máy hay hơn
Que madera contrachapada usas?
Very interesting video my new friend🤝🍻👍 really nice this cnc superb assembly😁👌, have a nice day see you soon😜✌
Thank friend 😊👍👍
Hello, I bought one of these machines but I follow the instructions and the wood is burned in some places.
can cut mdf?
Comprei uma dessa , meu laser não acende, nem se movimenta , alguem ajuda? to triste
Nice 💗💖
cả thuế hải quan vào là hết tổng bao nhiêu bác?
Giá máy trên web thì tùy đợt sale, còn phí ship tới tay + thuế tầm 1tr bác !
@@SDiYchannel01 thanks bác, chúc kênh ngày 1 phát triển với nhiều nội dung hấp dẫn nha
Good
Thank you fr
giá bao nhiêu vậy a
Istruzione in italiano?
Dimensi?
I bought this machine from Tech-Land store at aliexpress and got scammed:( machine is broken and they dont want to refund. They want me to fraud with the value of the machine with shipping so they dont pslay tax: i am not gonna fraud with tax. Now they banned me
I am very sorry for the problem you encountered. One device can't go wrong, but the seller's handling is terrible. I don't know the details of the incident. But you should send feedback to the homepage, and have them solve it. Hope you fix the device damage soon !
ราคา
not so good idea make graver on phone inside cover ...battery can explode
Necha pul turadi bu apparat
when you make a long range fpv plane
Cocacola
.................