'Fixing' my light condensation

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • This is something that's been bugging me for months. Lets try and DIY this shall we? Enjoy...
    Thumbnail photo: Pitstop Photography
    Facebook: FNLEW
    Instagram: fn_lew
    Snapchat: djloobylew
    Intro music: DROLOE (feat. Belle Doron) - In Time
    Outro music: Headhunterz & Conro (feat. Clara Mae) - Unique

КОМЕНТАРІ • 71

  • @longbar2344
    @longbar2344 3 роки тому +1

    why didn't u pop the boot trim off?
    bet there's a small crack ontop letting water in

  • @therzook
    @therzook 4 роки тому +1

    methylated spirit for cleaning rubber/plastic seals - wipe it off several times, then apply some silicone lubricant (methylene dries rubber a lot so always apply lubricant after cleaning). works wonders, you will not see any mould for several years

    • @FNLEW
      @FNLEW  4 роки тому

      Thanks for the pointers

  • @doobersigaming9312
    @doobersigaming9312 6 місяців тому +1

    Old vid but great work Lew. Am about to take all my rear lights off to rid of the green mould. Wish me luck 🤣

    • @FNLEW
      @FNLEW  6 місяців тому

      Thank you for that mate. Best of luck!

  • @brettershoalar9001
    @brettershoalar9001 5 років тому

    lots of water^^ Winter is coming. It will be the 5th winter and I am really watching out for this problem. I mean any leak is disturbing. First it will be wet and damp in the car. Let pass a few weeks and it will smell frowsty over time. Hopefully the lowrr rear plastic window is still sticking strong. lol
    Good video and and a good solution! cheers

  • @pablohrabia1470
    @pablohrabia1470 Рік тому

    Bloooody good job !!! Im enjoyed you're videos !!!!!!!
    ...leaking boot already have been sorted!!
    Now lights !!

    • @FNLEW
      @FNLEW  Рік тому +1

      Thank you very much! Good luck with it!

  • @reverendjonlawson1313
    @reverendjonlawson1313 Рік тому

    Excellent video, really helped with my Crz rear light with the samn issue.

    • @FNLEW
      @FNLEW  Рік тому

      Thank you mate. Glad I could help!

  • @harolddewaal4268
    @harolddewaal4268 3 роки тому

    Actually very easy to take off the trim.
    I am an amateur but got it off in a couple of minutes. After that it's child's play

  • @dehv
    @dehv 5 років тому

    This happened on my Ford Mondeo and I drilled a small hole underneath the light to allow water to drain if it gets in, which only happens when the jet wash hits the light. Seems to be a problem with the sealing of the lamp.

    • @FNLEW
      @FNLEW  5 років тому

      Yeah it's definitly the sealant that let's them down.

  • @Poolio32
    @Poolio32 5 років тому

    Good Vid......my 2011 FN1 has started to fog slightly inside the lenses on damp days plus as you stated that green mossy stuff has been around the lights since I’ve bought it....I’ve tried to clean them with various brushes while on the car but I’m thinking of doing the same 👍🏻

    • @FNLEW
      @FNLEW  5 років тому

      Unfortunately it's all common faults with this car. Glad you liked the video. 👍🏻

  • @owensoft
    @owensoft 5 років тому

    wait until the big center section starts gathering water that is fun to take off. Next time just leave bulb inside while you unscrew the nuts, and the electrical wires have clips.

    • @FNLEW
      @FNLEW  5 років тому

      God I can imagine. Yes I noticed that. Two ways to do the job I suppose 👍🏻

  • @leokabz8128
    @leokabz8128 5 років тому

    Thanks for showing this, Had the same issue with my fn. Keep on the good work mate 👌👌

    • @FNLEW
      @FNLEW  5 років тому +1

      No worries at all dude. Thanks very much 😁

  • @Tee87
    @Tee87 5 років тому

    Thanks for the help mate i have condensation in my rear light deffo gonna do this ✌

    • @FNLEW
      @FNLEW  5 років тому

      No worries mate glad I could help! 😁

  • @mushboy88
    @mushboy88 5 років тому +1

    Just a quick question have you done the short shifter mod? It's worth doing 👍

    • @brettershoalar9001
      @brettershoalar9001 5 років тому +2

      Tony Prince I know, your questions is not pointing to me but I have done this mod and I like it. Its worth it. And to file out the little plastic spot is not that time consuming.

    • @mushboy88
      @mushboy88 5 років тому +2

      @@brettershoalar9001 totally agree it's the cheapest mod I have done to my CTR and the best in my opinion...

    • @brettershoalar9001
      @brettershoalar9001 5 років тому +1

      Tony Prince Yes. Plus that, driver and passenger window guards, from the brand Heko. Maybe dark rear windows inserts by Solarplexius or similar. Other than that, the extra Type-R logo on the front. A neo-chrome shift knob.
      I have spend (well worth) some money on a new double DIN radio unit. My 2008 model unit trashed itself-CDs no more readable. Wish I had the heated seats for the winter month but maybe I am better without it anyway, I mean its a Type-R lol

    • @FNLEW
      @FNLEW  5 років тому +1

      I've heard good things about this mod. I'd just rather try and get my gear selection a bit more reliable before I start messing with that. (which I have coming to the channel very soon 😉)

    • @Tee87
      @Tee87 5 років тому +1

      @@FNLEW i like your car mate ive watched you do it from scratch to look how it does now for a cheap mod ive heard lots of good things too im installing mine tomorrow deffo worth a shot when your ready 👍

  • @ianrandall7582
    @ianrandall7582 5 років тому

    Brill video dude. Good information and we'll put together. 😀

    • @FNLEW
      @FNLEW  5 років тому

      Thank you so much buddy 😁

  • @paulfarrell2840
    @paulfarrell2840 5 років тому +1

    Nice slippers fnlew

    • @FNLEW
      @FNLEW  5 років тому

      Bargain Buys £5 😉

  • @kirklishman8997
    @kirklishman8997 5 років тому +1

    Trust me it still does get condensation bro there is a vent on the rear under the gasket ..I use black tiger seal otherwise the silicone looks horrible fella 😄🤗

    • @FNLEW
      @FNLEW  5 років тому +1

      I'll just have to play it by ear then buddy. Up to now it's still clear as day. Yeah I'd use a different sealant if I did it again 😂.

    • @kirklishman8997
      @kirklishman8997 5 років тому +1

      I'm in the process of doing a led conversion 😉😄

    • @FNLEW
      @FNLEW  5 років тому

      @@kirklishman8997 ooooo does it make the bulbs a clearer colour?

    • @kirklishman8997
      @kirklishman8997 5 років тому

      @@FNLEW bulbs!! I'm ripping it apart fella doing a led panel conversion 😉😄👍 no bulbs..

    • @FNLEW
      @FNLEW  5 років тому

      @@kirklishman8997 a lot of work then 😂. Good luck with it! 👍🏻

  • @maxs3577
    @maxs3577 5 років тому

    Top vid as always !

    • @FNLEW
      @FNLEW  5 років тому

      Thank you mate ☺

  • @brettershoalar9001
    @brettershoalar9001 5 років тому

    cho Lew, got the same problem ova here! But this is only happening when cold weather arises and the sun 's burning on it.

    • @FNLEW
      @FNLEW  5 років тому

      Yes it's unfortunately the worst time for it.

    • @ncscmassive
      @ncscmassive 5 років тому

      that sounds like you have water sitting between the bottom of the light and the body work? maybe look at sealing the light unit into the body work?

  • @danijel124
    @danijel124 3 роки тому +1

    My lights dont fog up thank god ;)

  • @JamesTaz41
    @JamesTaz41 5 років тому

    Cool, and helpful.

    • @FNLEW
      @FNLEW  5 років тому

      Thank you

  • @dillonpender5261
    @dillonpender5261 5 років тому

    Good job lew 🙏

    • @FNLEW
      @FNLEW  5 років тому

      Thanks mate 👍🏻

  • @mrheisenberg72
    @mrheisenberg72 5 років тому

    Nice work young man

    • @FNLEW
      @FNLEW  5 років тому

      Thank you mate ☺

  • @tomosjohn230
    @tomosjohn230 5 років тому

    Class vid bro

    • @FNLEW
      @FNLEW  5 років тому

      Cheers bro 👍🏻

  • @zELeCTriFieDz
    @zELeCTriFieDz 5 років тому

    love ya vids mate gotta FNPoo mysekf

    • @FNLEW
      @FNLEW  5 років тому

      Cheers mate good stuff! 👍🏻

  • @marcogarofalo6343
    @marcogarofalo6343 4 роки тому

    Why didn't you remove the large plastic trim piece? You turned a 10 minute job into an ordeal! Lol 😜

    • @FNLEW
      @FNLEW  4 роки тому

      Which large plastic trim piece? The one on the back of the light? Or the back of the boot lid?

    • @marcogarofalo6343
      @marcogarofalo6343 4 роки тому

      @@FNLEW yes the big bit at the bottom of the tailgate. 2 screws in the pull down handles and a bunch of clips.

    • @FNLEW
      @FNLEW  4 роки тому +1

      @@marcogarofalo6343 fair enough. I'll know for next time.

    • @marcogarofalo6343
      @marcogarofalo6343 4 роки тому +1

      And there will be a next time! Also fyi You can use silicone spray its a lubricant for rubbers its great on door seals and things like the light seal too.

  • @alancooper7062
    @alancooper7062 5 років тому

    Its called an offset ring spanner

    • @FNLEW
      @FNLEW  5 років тому

      Thanks mate 👍🏻

  • @GirlsYouTube1991
    @GirlsYouTube1991 5 років тому

    2nd and 3rd comments lol

    • @FNLEW
      @FNLEW  5 років тому

      I know 😂

  • @brettershoalar9001
    @brettershoalar9001 5 років тому

    lots of water^^ Winter is coming. It will be the 5th winter and I am really watching out for this problem. I mean any leak is disturbing. First it will be wet and damp in the car. Let pass a few weeks and it will smell frowsty over time. Hopefully the lowrr rear plastic window is still sticking strong. lol
    Good video and and a good solution! cheers

    • @FNLEW
      @FNLEW  5 років тому

      It's definitly getting colder. Glad you liked the video! 👍🏻