🛒Can-Am Ryker Stereo Systems are available here at SlingMods.com: www.slingmods.com/canam-ryker-stereo-audio-systems ❕❕❕ Please note that the manufacturer has updated this product and the "docking station" wiring no longer goes to the fuse box for power. The new wiring design for the docking station portion of the install is a Plug N Play connector that plugs directly into the accessory port under the upper fairing! The speakers themselves will still run directly to the battery for power!
Installed my unit last Friday, made my Ryker even more fun to ride. Easy set--up, and sound great. The Ryker already gets a lot of attention, but with this unit I'm getting comments and questions at each stoplight. Thanks Slingmods.
Can someone please tell how do check the mileage of the Ryker. Bought mine a week ago and ride it a lot. Need to know how many miles I've put on it? Thanks! And is there a way to check oil level?
Hello Ray, each MFG has a different opinion on that. Stainless is the best option for weather resistance long term. You could go with black oxide coated bolts but stainless is the best choice.
Will this work with the factory sport windshield? The RAM mount alone is $100 from Can-AM, heck I’m just gonna buy this and get a phone mount, charger and audio setup.
Hello Leroy, we don't sell Genuine BRP parts.. so I have not personally been able to test that windshield. With that said, I looked up some pictures online and it looks as though the two products should work together fine.
Feel free to reach out to our customer service team at your convenience for assistance. Here's the link: www.slingmods.com/index.php?route=information/contact Thanks!
Hey Doc, we get a shipment on Tuesday of next week. Most are spoken for on this batch but we have a few left. I'd pre-order asap if you want one. Thank you!
Cool product. I really like the setup to the fuse box. But, I didn’t like the ground wires going to the battery. There are too many wires going to the battery. There has to be a better looking way.
Hey Dabo, i hear ya on that. We're working on one. It's a bit more complex than the F3 system because the F3 has several mounting points, whereas the Ryker does not, but it is happening! Thx.
The SSV system will have more mid bass then this system. That is located here: www.slingmods.com/kicker-bluetooth-audio-stereo-system-canam-ryker-rally-ssv-works
Hello Tawon, no you cannot. The system requires a bluetooth device to stream music. The USB ports onboard the device and the docking station are charge ports to charge your phone, etc.
We don't have anything with a subwoofer if that's what you mean... but we do have a system that will be using 6 1/2" kickers RGB speakers launching in the next few months. That will offer much more mid bass than this setup will.
This stereo system will not because the docking station is made specifically for the Ryker... but these will work for the Outlander: www.slingmods.com/canam-ryker-bluetooth-speaker-system-boss-audio
Hello John, these systems have been designed as bike specific products. I'm sure there is a solution for your Sportsmen.. but it is not something that we carry sir.
Hello Patrik, yes it is... but we would need to obtain your full delivery address. If interested please send over your request and address to our support team here: www.slingmods.com/index.php?route=information/contact Thank you!
Hello Hannah, yes this JBL system fits with both the F4 and MadStad windshields we sell on our site. I have only confirmed fitment with those two shields MFG's.
Your windshield should not be an issue with this system as it mounts to the bars. Our customer service team is available at 800-211-1396 if you'd like to discuss further. Thank you!
Hey John, we only have the Ryker Street with no windshield at this time. I'm not 100% sure on that until we get our Ryker Rally in June. Please call in if you need measurements. Glad to help! Thanks.
Hello Bxodyssey, we start routing the docking station harness down to the fuse block at approx 1:50. They'll be two harnesses. One for docking station power and one for the JBL Speaker power.
Hello Mabel, if you listen to the stereo with the engine off.. it would indeed drain the battery. If you listen while you ride, you're good to go. The speakers are IP rated and intended to be outdoors. The USB ports have rubber boots and caps for water protection as well. Thank you!
Wow bro, you had me until the battery connections, remove all negative battery connections first, then remove and connect positive connection, then reconnect negative connection. Unfortunately, I learned the hard way and it was expensive.
Hello, if you send our support team a ticket with your shipping address and the item(s) you'd like... we're happy to provide you with a shipping quote to your location. You can submit a support ticket here: www.slingmods.com/index.php?route=information/contact Thank you!
Hello Ice, we do have a system available for the Spyder F3 here: www.slingmods.com/canam-spyder-f3-f3s-bluetooth-stereo-system-ssv-works It's a 200W system with bluetooth and (2) 6 1/2" marine speakers.
I dont like that the screw heads are not blacked out like the ones that they are replacing. Also it looked like the speaker that you control volume etc from is on the right side which means you have to be off throttle to control it. Controls for audio should be on the left so you can adjust if needed on the move.
Hello Jeff, thanks for the feedback. We went stainless on the hardware so that it doesn't rust. The speaker volume control is indeed on the right speaker but the speakers locations can be switched with one another if so desired. Thanks!
Yes, we ship worldwide. Please contact our customer service team here: www.slingmods.com/index.php?route=information/contact with the items of interest and your ship to address and we're happy to provide a shipping quote for you. Thank you for the interest!
@@117skoot Hey Curtis, if you're talking about the Ram Tough Ball.. you'll need this for your device: www.slingmods.com/can-am-spyder-ram-mount-grip-cell-phone-holder-add-on-spyder-extras
Helly Lynell, that's the new Plug N" Play design the MFG has gone with. Now the dockng station simply plugs into the plug n play accessory port on the left side of the bike for power. The speakers however still connect directly to the battery. Here are the new instructions: www.slingmods.com/pdf/ryker-jbl-instructions.pdf
Hello Alex, we actually have the F3 JBL prototype in our office. This product will be coming for your bike very soon. Stay tuned as we'll be doing a video installation on it when available. Thank you!
You could consider swapping out the screw heads to hardware that requires a square bit like these: media.wihatools.com/media/catalog/product/cache/9bd448ac984422d041ecf9b60a6f9a0b/7/4/74895_2.jpg It won't stop a thief who really wants em... but it may slow em down.
Hello, yes these are available to Canada.. but we'd need to get you a shipping quote. Can you please contact our customer service team with your full address. They can be emailed here: www.slingmods.com/index.php?route=information/contact The product links can be found in the description of all videos.. but here's a direct link for you... www.slingmods.com/can-am-ryker-cell-phone-docking-station-jbl-bluetooth-speakers
The Ram Mount Phone Mounts come with a Elastic Tether that grabs all 4 corners of your device in addition to the spring loaded rubber phone mount itself. Never had someone lose a device on the road in our 5 years of selling these Ram mount phone holders.
Hello Smiley, Ram Mounts are some of the beefiest phone mounts on the market.. they've been thoroughly tested in UTV's and Offroad racing applications. They will flex as you ride as the clips are spring loaded and the restraints are rubber.
Why in the World would you Picky Back off an Existing Fuse when the Battery is inches away!!! This is definitely not how a Professional would install this product. This should be Hardwired to the Battery with a InLine Fuse. You fry that Fuse Box by Piggy Backing off that Fuse You just Voided Your Warranty for some CHEAP Speakers.
Hello Rick, the speakers amplifier does indeed pull off the battery for power. The docking station now goes to an "unused" accessory power port underneath the upper right side fairing. So it would be a dedicated fuse for the docking station. You wouldn't want to run your docking station directly to the battery for power as it would remain on at all times and drain your battery. The docking station needs to be connected to an ignition power source so it turns on/off with the ignition.
![TOP 5 Best Motorcycle Bluetooth Speaker [ 2024 Buyer's Guide ]](/img/n.gif)
🛒Can-Am Ryker Stereo Systems are available here at SlingMods.com: www.slingmods.com/canam-ryker-stereo-audio-systems ❕❕❕ Please note that the manufacturer has updated this product and the "docking station" wiring no longer goes to the fuse box for power. The new wiring design for the docking station portion of the install is a Plug N Play connector that plugs directly into the accessory port under the upper fairing! The speakers themselves will still run directly to the battery for power!
Does these speakers come with amp? I just got them installed Saturday at Mancuso I pick her up tomorrow.
@@royword176 Hello Roy, yes they do. The amp is integrated into the speaker housing.
Installed my unit last Friday, made my Ryker even more fun to ride. Easy set--up, and sound great. The Ryker already gets a lot of attention, but with this unit I'm getting comments and questions at each stoplight. Thanks Slingmods.
Great to hear Ricardo! :)
But is it loud at high speeds is the question for me ...
Where did you purchase it?
I ordered mine through Ebay, but it was through slingmods.
@@thebandit149 You have a link?
That’s awesome, that was one thing missing in Ryker
Do you have clear sound while riding on the hwy doing 80 mph
Wow, I really want a ryker now! Just need to find out where I'd park it in the hood😕
Jay Phive I put mine in the garage...lol
Need to get out the hood before gettin one of these
Jay Phive I’m in the hood 24/7 with mine. Gotta park in the dark with a $100 wheel lock lmao
Chain it to your house 😭
My house! I have a gaurd cat
Wow! Like these more than the first ones I saw you install.
Can someone please tell how do check the mileage of the Ryker. Bought mine a week ago and ride it a lot. Need to know how many miles I've put on it? Thanks! And is there a way to check oil level?
What size fuse is that blue one that is added ??
Why could not the replacement screws on the handlebar mounts be black to match what you replaced??
Hello Ray, each MFG has a different opinion on that. Stainless is the best option for weather resistance long term. You could go with black oxide coated bolts but stainless is the best choice.
I have looked everywhere and I'm unable to find the Quick Disconnect For The Fuse.
Can you advise where I can get one from
Thank you
Amazing well explained he didn’t say how much they cost but they are a must have love em patty in London x
$319.00 USD on their web site but out of stock
Will this work with the factory sport windshield?
The RAM mount alone is $100 from Can-AM, heck I’m just gonna buy this and get a phone mount, charger and audio setup.
Hello Leroy, we don't sell Genuine BRP parts.. so I have not personally been able to test that windshield. With that said, I looked up some pictures online and it looks as though the two products should work together fine.
Missed a step. Need to make sure you heat up those but connectors and shrink the heat shrink to help with weather protection
Is that those color things he points out
Can you please explain more in depth
I need explanation for the ram mount... never used 1 and the nut included doesn't seem to get tight enough.
Feel free to reach out to our customer service team at your convenience for assistance. Here's the link: www.slingmods.com/index.php?route=information/contact Thanks!
I need this ASAP but it’s backordered. Where can I get it
Hey Doc, we get a shipment on Tuesday of next week. Most are spoken for on this batch but we have a few left. I'd pre-order asap if you want one. Thank you!
@@Slingmods hey where can i order this what is the site or link that I can order it from please
These speakers are horrible
I have a windscreen on my Ryker, will this setup get in the way?
I don't know what shield you have.. but this system works with most the shields on the market.
Cool product. I really like the setup to the fuse box. But, I didn’t like the ground wires going to the battery. There are too many wires going to the battery. There has to be a better looking way.
How do I get this Bluetooth kit with the bracket
www.slingmods.com/canam-ryker-stereo-audio-systems
When are you guys going to come up with a speaker system from saving works for the Ryker? We want a loud system just like the f3
Hey Dabo, i hear ya on that. We're working on one. It's a bit more complex than the F3 system because the F3 has several mounting points, whereas the Ryker does not, but it is happening! Thx.
Have you guys come up with a louder system for the Ryker yet?
Is there a 4 speaker system similar to this jbl or one better? Looking for a little extra bass
The SSV system will have more mid bass then this system. That is located here: www.slingmods.com/kicker-bluetooth-audio-stereo-system-canam-ryker-rally-ssv-works
I just purchased a basic Can-Am Ryker 2021. Can this be installed on there? Because the shop said it could not.
Hello Erica, congrats on the new ride. Did they provide you a reason why? We've sold a number of these to 2021 customers without issue. Thank you.
I have music on a USB flash drive can I play it through this set up / system
Hello Tawon, no you cannot. The system requires a bluetooth device to stream music. The USB ports onboard the device and the docking station are charge ports to charge your phone, etc.
Do u have louder ones that can hold more bass 🔊🤔
We don't have anything with a subwoofer if that's what you mean... but we do have a system that will be using 6 1/2" kickers RGB speakers launching in the next few months. That will offer much more mid bass than this setup will.
@@Slingmods ok thanks
Will this work for 2022 can am outlander mr
This stereo system will not because the docking station is made specifically for the Ryker... but these will work for the Outlander: www.slingmods.com/canam-ryker-bluetooth-speaker-system-boss-audio
Are any of these speaker set compatible with an ATV? I have a 2020 Polaris Sportsmen 450
Hello John, these systems have been designed as bike specific products. I'm sure there is a solution for your Sportsmen.. but it is not something that we carry sir.
Will there still be room to add a windshield?
Yes, this JBL setup works with all of the windshields we've tested.
Is each speaker 40 watts or both equal 40 watts?
40 watts total. 20 watts per channel.
Do this system run your battery down, once the bike is off?
Yeah! Any 12v mod running after the engine is turned off, will run your battery down.
Is it possible to delivere that to the Czech Republic??
Hello Patrik, yes it is... but we would need to obtain your full delivery address. If interested please send over your request and address to our support team here: www.slingmods.com/index.php?route=information/contact Thank you!
Will this fit if I have a wind shield?
Hello Hannah, yes this JBL system fits with both the F4 and MadStad windshields we sell on our site. I have only confirmed fitment with those two shields MFG's.
I have a 15 inch windshield on my Ryker, I wonder if I can still install this on my bike without having to take my windshield off
Your windshield should not be an issue with this system as it mounts to the bars. Our customer service team is available at 800-211-1396 if you'd like to discuss further. Thank you!
10-4 I’m ordering now..😎
will that fit with the adjustable windshield?
Hey John, we only have the Ryker Street with no windshield at this time. I'm not 100% sure on that until we get our Ryker Rally in June. Please call in if you need measurements. Glad to help! Thanks.
It will fit the rally with windshield
5:20 song??
where you get that tool from?
www.slingmods.com/push-pin-removal-tool-universal
I must have missed something. Where did the dock wires come from?
Hello Bxodyssey, we start routing the docking station harness down to the fuse block at approx 1:50. They'll be two harnesses. One for docking station power and one for the JBL Speaker power.
Same question mine did not come with the wires to connect the fuses or the disconnector cord. Anyone else?
Como consigo los parlantes jbl?
Puedes pedir este artículo aquí www.slingmods.com/can-am-ryker-cell-phone-docking-station-jbl-bluetooth-speakers
Won’t that drain the battery?! Plus what about the weather?
Hello Mabel, if you listen to the stereo with the engine off.. it would indeed drain the battery. If you listen while you ride, you're good to go. The speakers are IP rated and intended to be outdoors. The USB ports have rubber boots and caps for water protection as well. Thank you!
Wow bro, you had me until the battery connections, remove all negative battery connections first, then remove and connect positive connection, then reconnect negative connection. Unfortunately, I learned the hard way and it was expensive.
Can you make phone calls and receive calls and get gps instructions?
That’s my question as well, I have an iPhone can you still do Siri commands?
Awesome video!!
How can I get it in Bangladesh?
Hello, if you send our support team a ticket with your shipping address and the item(s) you'd like... we're happy to provide you with a shipping quote to your location. You can submit a support ticket here: www.slingmods.com/index.php?route=information/contact Thank you!
I enjoy checking your web video. With thanks!
need this on the f3 too. i like the simple install compared to most systems offered for the f3
Hello Ice, we do have a system available for the Spyder F3 here: www.slingmods.com/canam-spyder-f3-f3s-bluetooth-stereo-system-ssv-works It's a 200W system with bluetooth and (2) 6 1/2" marine speakers.
Can you hear them at 60mph?
With a full face helmet.. I'd say NO. With a skull cap helmet.. i'd say it's Audible.. but not super loud at highway speeds.
Nice!! Would’ve loved to hear how they sound- I’ll keep scrolling
Where are you located?
We're located in Moorpark, CA
I dont like that the screw heads are not blacked out like the ones that they are replacing. Also it looked like the speaker that you control volume etc from is on the right side which means you have to be off throttle to control it. Controls for audio should be on the left so you can adjust if needed on the move.
Hello Jeff, thanks for the feedback. We went stainless on the hardware so that it doesn't rust. The speaker volume control is indeed on the right speaker but the speakers locations can be switched with one another if so desired. Thanks!
You could always paint the tops
Very nice. do you guys ship to Brazil?thx!
Yes, we ship worldwide. Please contact our customer service team here: www.slingmods.com/index.php?route=information/contact with the items of interest and your ship to address and we're happy to provide a shipping quote for you. Thank you for the interest!
@@Slingmods All right thank you so much for your time!!!! take care nice channel
Nicest set up thus far
Getting mine outta the shop from a rear end collision..new JBL's attached.. Can't wait to hear them
Sorry to hear that Curtis.. hope you're alright. Enjoy the new tunes!
Got my Ryker back.. cold ass ride from Connecticut to Rhode Island but i made it and the JBL's sound SWEET 😁
I have the mount/ball for the phone but tryna find which phone holder goes with it?
@@117skoot Lol. Awesome Curtis! We have some heated grips coming soon for those cold rides man! Stay tuned...
@@117skoot Hey Curtis, if you're talking about the Ram Tough Ball.. you'll need this for your device: www.slingmods.com/can-am-spyder-ram-mount-grip-cell-phone-holder-add-on-spyder-extras
Name on music in ??.:)
"Put the Place Up" by Niklas Gustavsson
Great video.
Thanks for sharing.
New subscriber here from Philadelphia PA
can you hear these on the highway?
Based on consumer reviews.. I would say not with a full face helmet.
Cool..., 👍👍👍
Mine did not come with the wires to connect the fuses or the disconnector cord. Anyone else?
Helly Lynell, that's the new Plug N" Play design the MFG has gone with. Now the dockng station simply plugs into the plug n play accessory port on the left side of the bike for power. The speakers however still connect directly to the battery. Here are the new instructions: www.slingmods.com/pdf/ryker-jbl-instructions.pdf
Watts??
40 watts total. 20 watts per speaker.
I purchased 2 sets for both my Rykers but I am going to send the uninstalled one back.
No problem, please send it back to us and we'll take care of a refund for you.
Why did you send it back?
Why?
dabo1971 not loud at all...could barely hear even driving around town
Keisha Baskin horrible sound-not loud at all...can’t even hear driving around town.
Up to about 55 mph.
Love the setup. Up to what speed can you hear them?
I have these speakers and with a helmet I can't here them over 45mph
@@quietclarence7998 thanks that's what I was worried about.
I would say these are best heard at "non highway" speeds unless you're wearing a half shell helmet that does not block the ears.
They are great sound and quality though
@@Slingmods thanks
Please make for the F3! I’d prefer these JBL to the speakers you have for the F3
Hello Alex, we actually have the F3 JBL prototype in our office. This product will be coming for your bike very soon. Stay tuned as we'll be doing a video installation on it when available. Thank you!
Is there a way to lock them down so no one can try stealing the speakers
You could consider swapping out the screw heads to hardware that requires a square bit like these: media.wihatools.com/media/catalog/product/cache/9bd448ac984422d041ecf9b60a6f9a0b/7/4/74895_2.jpg It won't stop a thief who really wants em... but it may slow em down.
Can this fit my bicycles
Just kidding
@@thbzaboy2717 Lol. Only if your bicycle has a 12v battery on board.
hell yeah...finally
Very useful review
Perfect speakers 👌👌
Is it available in Canada 🇨🇦?
Can you please tell me price and provide the link from where to buy?
Thank you
Hello, yes these are available to Canada.. but we'd need to get you a shipping quote. Can you please contact our customer service team with your full address. They can be emailed here: www.slingmods.com/index.php?route=information/contact The product links can be found in the description of all videos.. but here's a direct link for you... www.slingmods.com/can-am-ryker-cell-phone-docking-station-jbl-bluetooth-speakers
Sick.
Lol, hit a pothole, goodbye phone. 🤣🤣🤷♂️🤷♂️
The Ram Mount Phone Mounts come with a Elastic Tether that grabs all 4 corners of your device in addition to the spring loaded rubber phone mount itself. Never had someone lose a device on the road in our 5 years of selling these Ram mount phone holders.
O wouldn't feel safe with that phone clip, I saw that phone bouncing at speed i can see that phone flying!
Hello Smiley, Ram Mounts are some of the beefiest phone mounts on the market.. they've been thoroughly tested in UTV's and Offroad racing applications. They will flex as you ride as the clips are spring loaded and the restraints are rubber.
RAM is great. I can put a 7” GPS in the extra large and it doesn’t budge. Smaller one for my phone.
The way you edited the video hard to know every steps .
I started watching like...no problem I can do that...but, um no lol
Lol. Thx for the feedback CJ.
Why in the World would you Picky Back off an Existing Fuse when the Battery is inches away!!!
This is definitely not how a Professional would install this product.
This should be Hardwired to the Battery with a InLine Fuse.
You fry that Fuse Box by Piggy Backing off that Fuse You just Voided Your Warranty for some CHEAP Speakers.
Hello Rick, the speakers amplifier does indeed pull off the battery for power. The docking station now goes to an "unused" accessory power port underneath the upper right side fairing. So it would be a dedicated fuse for the docking station. You wouldn't want to run your docking station directly to the battery for power as it would remain on at all times and drain your battery. The docking station needs to be connected to an ignition power source so it turns on/off with the ignition.
40 watts? No sir!
Thx for the feedback.
Seems to complicated for me...If I had somebody to do it I would buy it
@@the1spyderryder Not my cup of tea, I'm just a business builder i guess.