Zbaitu C80-EAIR 10w optical power & Atomstack M40 5w

This video is correction for my previous upload: • Zbaitu C80-EAIR 10w op...
next video, testing with production material, 9mm pine wood: • 10w diode laser vs 9mm...
Power testing 10w vs 5w optical power.
Zbaitu C80-EAIR 10w vs Atomstack M40 5w.
parameters:
speed: 125mm/minute
power: 100%
pass: [3, 5, 10]
variables:
wood: pine and meranti
laser head: zbaitu c80 10watt and atomstack m40 5watt
Atomstack A5 M40 engraver set: shopee.com.my/...
zbaitu 10w laser head: www.aliexpress...

[@barlexrespectaizer452]

hi, please help me... I bought something like that and have set the spindle 1000RPM (S-Value 1000) 125mm/m but it can't cut 12mm softboard. May I know what the focusing distance is from the laser to the object and the power supply you use, 12 Volts, how many amperes?

[@krazifapps1806]

hi sorry for late reply, focusing distance from material surface to the laser casing body for this is about 3~4mm, please note that distance is not from the laser lens. what is your laser power btw? if 5 watt, it won't cut no matter how many passes. i tried it. if 10w, maybe multiple passes will do?
yes 12v and about 3A
i wish you will have success.

[@barlexrespectaizer452]

Thanks so much for your reply, I have the same C80-EAIR 10Watt.
Yes yesterday i try about half from the standart focusing and it can cut PLYWOOD 9mm but it take so long time because of 5-6 Pass, and cut MDF/HDF 5mm with 5 Pass.
I am using 12V 5A adapter, because when I start using 12V 3A it do to protect on the psu so I change with 5Amp PSU, and i think it need more current because when start cutting on 100% laser, the fan can be heard spinning more slowly.
I need to cut 12mm plywood but it can't @@krazifapps1806