Designing PYD Life Tumblers

Hello everyone! In today's video, I will design two tumblers using my PYD Life tumbler heat press for my daughter and my granddaughter. Enjoy the video and see you on the next one, bye!
The links below are affiliate links and I will earn a small commission from eligible purchases at no additional cost to you.
zdigitizing.ne...
zdigitizing.co...
shareasale.com...
shareasale.com...

[@nahnisjourney1406]

1:23 Both images are very BEAUTIFUL!

[@iCraft2Create]

Thank you 😊 I appreciate the compliment.

[@nahnisjourney1406]

I always cut the white off the top edge and turn the tumbler upside down to make sure that it’s flush to the edge , as well as snug to the tumbler. I tend to go extreme on taping, too. It works well to keep the air out.

[@iCraft2Create]

I know. I'm trying to ease up on using so much tape.

[@nahnisjourney1406]

They both look great, but I never use painters tape on my tumblers. I wonder if the masking tape would achieve the same effect if you use it instead of the blue painters tape.
Also, you can put a piece of heavy duty thread between your A-Sub paper and your masking/painters tape to rip it apart after it cools down. I usually place my tumbler in front of a fan to cool it down quickly. I also use silicone a mat to sit the hot tumbler on.
Love the kitten! 🐱
QUESTION: Have you sublimated a 30 oz tumbler yet! I have to do on with a handle. I’m so nervous about doing it. The oven takes longer than the press. 18:47
Thank you for sharing your technique.
Happy Mother’s Day! 🌹🌹🌹

[@iCraft2Create]

I've used both and achieved the same results.

[@SheWritesHerJourney_]

Beautiful job

[@iCraft2Create]

Thank you!

[@kawandalindsey368]

Hi. Great video. The tumblers turned out Beautiful. Your daughter and grand-daughter are going to Love their tumbler. Awesome Job. ❤😊
Question: Why did you have so much overage on the wraps. I was amazed when your tumblers turned out with an Awesome seam. Also, if you don’t mind me asking, what's the name of the image you used with the kitten on it? Thanks in advance for responding back. 😊

[@iCraft2Create]

Thank you so much!

[@kawandalindsey368]

You're Welcome. ❤😊

[@KeeblerStephens]

Hello. Wonderful job. Which program do you print from?

[@iCraft2Create]

Thank you! 😊 Printing from cricut design space.

[@nahnisjourney1406]

How do you do a semi gloss image on a tumbler.
Ohhh!!! It’s the printer settings. 🙄

[@iCraft2Create]

Yep, you got it.