That’s the same cart I use on the daily for the last three years and love it … you’ve got a way to go to stock it.. mines super over loaded but looks to be a nice start and ya it’s a little to clean … lol *tip what I did was the power bank u under the tool holder I welded some female air connections to a magnetic strip from harbor freight to hang some of my air tools from … the only problem I’ve had with mine and yes i work in heavy equipment and I abuse it was the top drawer slide bearings kinda just disintegrated everywhere and the rivet weld on the locking handle broke but was an easy fix … good luck and nice video kinda makes me want to show off how I got mine stocked.
For ratchets I highly recommend getting the 120 tooth gearwrench ratchets I seen them on Amazon for about $80 bucks which is a 1/4 and a 3/8 they are super good for tight spaces and inexpensive
what model cornwell is this tool box? Love to do a similar setup as you're very logically optimized on how you arrange your tools. Definitely will streamline one's work around the shop.
Thank you, I really appreciate the red box is discontinued just color wise but here is the part number for matte black “CTBF496KMK” They have orange, blue, graphite, matte black and matter grey
That ratcheting screwdriver bit set is da bomb ! Bought it last year and I use the heck out of it ! Don’t let the haters inside your head their comments are driven by jealousy! Beautiful set up ! Clean + organized = money !
Man let me tell you, I was waiting so long for it to go on sale, I'm just really drawn to the handle, and I found out today that they make a stubby version. Did you know about that?
@@roninkamI respect keeping things clean. But you have twice as much box as you need, and that means you have more area to clean.... And it takes longer to open and close big heavy drawers. You would be fine with a small harbor freight cart. Or a small American made cart. Buy a cheap metal storage cabinet for the junk that hardly gets touched and put it in the corner. Then run a small efficient tool cart.
What are you using to clean your tools and box? Mine is filthy. I've used tub-of-towels for my tools but sometimes it's not doing the job. Great video. I've watched this like 5 times
To clean my box I use the industrial hand wipes that are like orange and double sided I also use that for my tools at the end of the week for super wipe down, day to day for my tools I just use brake cleaner but I do not use that on my box
Also if you have soft grip handles on your tools I wouldn’t use brake cleaner a lot because it will fade the color some, but if it’s straight metal I haven’t had any issues so far, but the wipes are really good, there are a number of companies that make them
Great selection of tools you don't need much more than that. Going forward maybe just torque wrench that's about it Today's cars don't utilize anything bigger then a 22mm and a 24mm
Love the setup man, looks amazing I just ordered my cart today in grey! By chance where did you get your magnetic strip you had from the previous setup, do you recommend the plate over it ?
Much appreciated! The strip is from Matco, as far as the plate I do recommend, it's stronger, and they have a size bigger, was actually thinking about grabbing a big plate and use it for sockets instead of socket rail
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Love this my friend.
Amazing
Vincent from 🇬🇧 U.K.
Thank you Mr. Vincent
That’s the same cart I use on the daily for the last three years and love it … you’ve got a way to go to stock it.. mines super over loaded but looks to be a nice start and ya it’s a little to clean … lol *tip what I did was the power bank u under the tool holder I welded some female air connections to a magnetic strip from harbor freight to hang some of my air tools from … the only problem I’ve had with mine and yes i work in heavy equipment and I abuse it was the top drawer slide bearings kinda just disintegrated everywhere and the rivet weld on the locking handle broke but was an easy fix … good luck and nice video kinda makes me want to show off how I got mine stocked.
Thank you! And you should show yours off, we love tool box tours around here
@@roninkam I’ve been eyeing that hammer pry bar combo this month nice buy for sure
For ratchets I highly recommend getting the 120 tooth gearwrench ratchets I seen them on Amazon for about $80 bucks which is a 1/4 and a 3/8 they are super good for tight spaces and inexpensive
what model cornwell is this tool box? Love to do a similar setup as you're very logically optimized on how you arrange your tools. Definitely will streamline one's work around the shop.
Thank you, I really appreciate the red box is discontinued just color wise but here is the part number for matte black “CTBF496KMK”
They have orange, blue, graphite, matte black and matter grey
Loving your little rotary hot wheels collection there.
I see an FB and RX3. Was that a REPU Too?
Great box! Ignore the haters must correct you though your 123 bit set is now a122 bit set. Great vid and be safe
You know what you're right, my Mac dealer owes me a dollar
That ratcheting screwdriver bit set is da bomb ! Bought it last year and I use the heck out of it ! Don’t let the haters inside your head their comments are driven by jealousy! Beautiful set up ! Clean + organized = money !
Man let me tell you, I was waiting so long for it to go on sale, I'm just really drawn to the handle, and I found out today that they make a stubby version. Did you know about that?
@@roninkam I did not know that, I’ll have to look into that! Thanks!
@@roninkamI respect keeping things clean. But you have twice as much box as you need, and that means you have more area to clean.... And it takes longer to open and close big heavy drawers. You would be fine with a small harbor freight cart. Or a small American made cart.
Buy a cheap metal storage cabinet for the junk that hardly gets touched and put it in the corner. Then run a small efficient tool cart.
What ya use to hang up the flashlight up?
If you're talking about the stream light flash light, when I bought it, the box came with 2 long screws, I just drilled them in
What are you using to clean your tools and box? Mine is filthy. I've used tub-of-towels for my tools but sometimes it's not doing the job. Great video. I've watched this like 5 times
To clean my box I use the industrial hand wipes that are like orange and double sided I also use that for my tools at the end of the week for super wipe down, day to day for my tools I just use brake cleaner but I do not use that on my box
Also thank you for your support
Also if you have soft grip handles on your tools I wouldn’t use brake cleaner a lot because it will fade the color some, but if it’s straight metal I haven’t had any issues so far, but the wipes are really good, there are a number of companies that make them
Great selection of tools you don't need much more than that. Going forward maybe just torque wrench that's about it Today's cars don't utilize anything bigger then a 22mm and a 24mm
Thank you! And yes I'm waiting for a torque wrench to go on sale or going to try gear wrench since they are reasonably priced
Love the setup man, looks amazing I just ordered my cart today in grey! By chance where did you get your magnetic strip you had from the previous setup, do you recommend the plate over it ?
Much appreciated! The strip is from Matco, as far as the plate I do recommend, it's stronger, and they have a size bigger, was actually thinking about grabbing a big plate and use it for sockets instead of socket rail
Very nice setup 💯. Trim tool/ upholstery panel tool, lol. Also have you seen the Milwaukee m12 tire tool
Thanks bro and thank you for watching again!! I just looked it up, are you talking about the buffer?
That’s nice
Nice dope
my mame is phil