The fastest side burner using oil bottle オイルボトルを使った最速サイドバーナー
Вставка
- Опубліковано 1 жов 2024
- 肉厚で丈夫なオイルボトル缶を使い、五徳不要の直載せタイプのサイドバーナー。2013年に公開していたCHSサイドバーナーをオイルボトル缶でリメイクしたものです。
肉厚であることで丈夫(多分数kgの荷重に耐えられる)、一般的なサイドバーナーはジェットを真横に噴いていることに対し斜め上へ噴射することで効率を上げています。全体の質量が重くなって起動に何秒か余計にかかりそうなところは、主室開口径をできるだけ大きく取ることで回避してあります。
熱膨張率の違いなのかコンマ1~2mm内缶が浮いてきてしまうのを嫌って、必要でも無いのですがリベットで固定しています。
Can't believe after all these years you're still doing new stoves. Respect to you sir.
Tetkobas; "A different can! Let's do a alcohol stove". :))
UA-cams best kept secret is back at it again.
Remember, though this is beautiful, there is no windscreen present and thus represents a different experience than in the field.
Of course I know the difference of actual fields. The video is just one indicator. But this stove is better than commercially available direct put type stove.
I miss you. Great to see your ok
Amazing. Now finding these strange bottles is the real challenge for this build in the Americas!
I see that Amazon will ship one from England to the US. $20 with free postage.
@@dwightjones3305 just buy a Lixada for that price tho
Get creative! I find that the best way to interpret a lot of Tetkoba's stuff is to take his designs as inspiration for your own projects. We have a lot of cheap aluminum (and stainless) water bottles that have shoulders that could be used for a design like this. Maybe an old aerosol can?
One more clean and excellent stove, like all of yours.
Have you got any suggestions for a NARROW pot, like the diameter of a 400ml cup ? Bigger holes? Fewer holes? What is your opinion ?
Thank's in advance, keep the good work my friend
Thanks comment. In conclusion, I think there is no solution. I think it's best to combine a narrow pot with a centrally convergent flame stove like normal CHS.
They actually sell the stuff you used the can from on Amazon so we here in the US can make these as well. ^_^
Definitely one of your best so far!
Thanks a lot for the sharing! Awesome!
もう13年版から、かなり月日が流れてしまいましたね、この種類の缶はガソリンスタンドで、添加剤などの空缶で、以前は何本か使いました。肉厚なので、加工する処を加熱してナマしてからやっつけていました(笑)
電動工具を駆使しつつ、なまさず加工してますよ。凹みにくい以外使うメリットは殆ど無いですね。
AXEボディスプレーの缶がとんでも肉厚なアルミ缶で、切り出すのがたいへんですが、なかなか頑丈で小さいバーナーできますよー
ただ、火を点ける度にイイニオイがしてアレですがw
正直この缶も加工が面倒なだけで使う意味は殆どありませんよ。厚い = ULに反しますしねえ。
本当に素晴らしいですね。
ジェット穴もサラっと空けますって、実際やるとなかなかこの精度で出来ないんですよね😅
それと何時も思うのはそれぞれ違う缶のコンマ何ミリのすり合わせを想像力と仕上げで作り込んでいく所が尊敬します!
コメントありがとうございます。まあ20年近くで累計数1000個を作ってますからそれなりに習熟してます。
素晴らしいです!!!
Wow
Thanks for another great video. What are the three little rivets for that have been added at the top?
The rivets are to prevent its inner piece floating.
I wonder if a beverage can could be improved by adding a layer of JB weld at the jets. There would be more thickness to set the angle.
KMKMR22 make jets in this way. Another Japanese guy use small rivets for jets.
@@Sokol10 thank you! I've only followed a few stove channels so far and don't know them all!
That high-pitched noise at 0:44 makes this video unwatchable
no problem here.
Don't hear a problem either