hey there! I'm having issues with comments (my replies to comments get deleted sometimes) -- which happened to my initial reply to your comment... so I wanted to say again that thank you for the kinds words! I really appreciate it! :)
Well done presentation. Very informative. I made my decision to get this model based on your review. BTW, your Wide Mouth product link goes to the bottle with the Leak Proof Flex Cap, not the Sip Lid.
Is it easy to open and close the Sip Lid with one hand? Like when you're driving and have it in a cupholder. All the clips I've seen seem to take some effort to twist with two hands
@@Kevin-li7go I tried that before but it seemed like putting downward pressure on the lid makes it harder to twist (i assume the red rubber inside is the culprit)
Thanks! I got this from their store in a nearby mall (Ayala Center Cebu). Odd, it seems like it's not listed on their PH site but it is on their US site www.hydroflask.com/32-oz-wide-mouth?color=fog
you mean like putting in a regular straw on the hole of the sip lid? That won't work. There's a wide mouth straw lid though you might want to check that
The sip lid is a complete failure of design and functionality. 3 part lid which is not intuitive, frustrating to take apart and totally unnecessarily complicated. I want my money back.
I agree with the frustrating 3 part lid. I had to see this video to figure it out. I could assemble it, but it would lock the cap from turning, for some reason. now it's free. Don't know why it kept locking. Have no clue why it needs the last section. Guess it must be some kinda "super-seal". Now I'll have-ta do a drip test, to see if it really works. Thanks for the review.
@@joequillun7790 I spilled my coffee on passengers seat in the car with this goddam container. All the twisting and turning and the lid still was not locked 🤣🥲
I agree with 50sorrowc!!!! The lid design is absolute FAIL! It is not intuitive, it is very complicated - I gave it to my friend (an ENGINEER!) and after trying for ten minutes to figure it out, he couldn’t do it. He was gettting so frustrated, I had to take it back and look up an instruction video. It comes with an instruction pamphlet, but should you really have to look at that EVERY TIME you go to clean it?? This is seriously the most frustrating product design I have ever come across in my life. The hydro flask works great at keeping beverages cold and hot, but this lid design makes it NOT WORTH IT, IMO! FAIL.
Do you like the new flask and sip lid design? Or do you prefer the OG/classic one?
definitely the sip lid!! thanks so much for the review. i’ve been looking for a leak-proof lid so i’m glad i came across your video.
@@aprillnguyenn awesome, glad i could help! takes a little bit of effort to clean the lid but overall a great bottle
Is the straw lid also leak proof?
The quality of these is really good for such a small channel! Keep up the grind bro it'll pay off
thanks bro I appreciate it!
Stone and fog are such beautiful and understated colors.
Indeed!
Quando parou de fabricar a cor fog? 😢
2 thumbs up for the simple and informative review. Nice mix on the sound and voice. I do appreciate the simplicity of this review and the HydroFlask.
Thank you! I appreciate it.
Great review dude, small things like music and audio levelling and on point, i just ordered my version in white and i can't wait to get it :D
Thank you dude, I appreciate it. That's great! You're gonna find yourself drinking more water/coffee than before hahaha
I love how much quality your videos have, especially for a small channel. Subscribed, keep up the great vids!
hey there! I'm having issues with comments (my replies to comments get deleted sometimes) -- which happened to my initial reply to your comment... so I wanted to say again that thank you for the kinds words! I really appreciate it! :)
@@earlmalaki Oh no, that's totally fine! And I did see your comment from before, thank you :)
the quality is so good. istg i just don’t know what to say! the video is soooo professional
Thank you! I appreciate it 😊
Love the review made me buy one right after!
Awesome! What color did you get?
I feel like the old one kept cooler for longer. My new one runs out of ice fast.
Thanks man real helpful
Good review, I’m probably going to buy one of these as well.
Well done presentation. Very informative. I made my decision to get this model based on your review. BTW, your Wide Mouth product link goes to the bottle with the Leak Proof Flex Cap, not the Sip Lid.
This is a well made video thanks
THEY HAVE HYDRO FLASKS AT REBEL SPORTS OMGGGG IM GETTING ONE IM GONNA ASK MY MOM
Sksksksksk
Is it easy to open and close the Sip Lid with one hand? Like when you're driving and have it in a cupholder. All the clips I've seen seem to take some effort to twist with two hands
Yeah, it's a reasonably snug fit, so you'll need both hands to open it.
You actually can open it with one hand, I tested it. You just need to put pressure on the lid in the cupholder and you will be able to open it.
@@Kevin-li7go I tried that before but it seemed like putting downward pressure on the lid makes it harder to twist (i assume the red rubber inside is the culprit)
Ola, quando foi descontinuada a cor fog?
Hi, have you tried putting a starbucks venti iced coffee there? Does it fit?
Where did you buy? Didn’t see these colors on the website. Love the review!
Thanks! I got this from their store in a nearby mall (Ayala Center Cebu). Odd, it seems like it's not listed on their PH site but it is on their US site www.hydroflask.com/32-oz-wide-mouth?color=fog
Me drinking my water about out of my hydro flask and I love it best water bottle brand
Hindi ba nag momoist ang flex sip lid kapag malamig ang laman?
Can you use a straw with the sip lid ?
you mean like putting in a regular straw on the hole of the sip lid? That won't work. There's a wide mouth straw lid though you might want to check that
Vacuum installed NOT buy a Zojirushi and its like night and day.the Zojirushi performance is way better.
can we insert the straw from the top/lid?
no this lid is a closed cap. but they have lids specifically for using with straws too
How about the lid and the cap if i put hot water the cap and lid can be affected to hot or not?
The sip lid was designed to handle hot beverages like coffee so no problem there. I use it for that purpose too
Can i interchange sip lid and wide mouth?
Does it fit with the same bottle?
Yup! All wide mouth lids can be used on any wide mouth bottle as they have the same thread
Idk if it's just me, but my sip lid somewhat leaks or condenses if i put icy drinks
Neither of the flasks viewed here has the trademark on either the logo or the name, are these a genuine product?
That's one of the changes they did for the updated 2.0 flask design. See 00:28 for details, 00:40 specifically on the trademark being gone
Anong name ng table mo lods?
yung lifetime na plastic yan lods yung nasa ace hardware hahaha
ah ngayon ko lang nakita comment mo sa kabila FlexiSpot na 70x40cm oak color
Does the sip lid fit on a 24oz?
I think this lid fits any wide mouth bottle. The 24oz is standard mouth so no it will not fit
Hey! Don’t forget that Jesus Christ loves you and he died for you have a blessed day ❤️
Lol
They are great bottles. An American company but very unfortunately - made in China.
You drink hot milk???
The sip lid is a complete failure of design and functionality. 3 part lid which is not intuitive, frustrating to take apart and totally unnecessarily complicated. I want my money back.
Hey there! Interesting insight. The usual snap a flap to open/close sip lid is indeed simpler.
I agree with the frustrating 3 part lid. I had to see this video to figure it out. I could assemble it, but it would lock the cap from turning, for some reason. now it's free. Don't know why it kept locking. Have no clue why it needs the last section. Guess it must be some kinda "super-seal". Now I'll have-ta do a drip test, to see if it really works. Thanks for the review.
@@joequillun7790 And the red rubber seal even has a right-side-up, which, I just now realize, can be easily missed. Anyway, glad this review helped!
@@joequillun7790 I spilled my coffee on passengers seat in the car with this goddam container. All the twisting and turning and the lid still was not locked 🤣🥲
YES! The lid is so frustrating I have to look at
I agree with 50sorrowc!!!! The lid design is absolute FAIL! It is not intuitive, it is very complicated - I gave it to my friend (an ENGINEER!) and after trying for ten minutes to figure it out, he couldn’t do it. He was gettting so frustrated, I had to take it back and look up an instruction video. It comes with an instruction pamphlet, but should you really have to look at that EVERY TIME you go to clean it?? This is seriously the most frustrating product design I have ever come across in my life. The hydro flask works great at keeping beverages cold and hot, but this lid design makes it NOT WORTH IT, IMO! FAIL.
Counter clockwise to disassemble clockwise to assemble pretty basic!