RC Car 3D Printed Body Making - Hyundai IONIQ 5N Rally

3d Printed Body Shell
For RCMK Smithmaster SCR
WELCOME AND THANKS FOR WATCHING👍
Contact : [e-mail](South Korea)
RCMK Smithmaster 1/5 Scale Short Course Truck
Korea : rcmate.com/main...
Worldwide : smithmaster.net
contact : [e-mail]
#scr #ioniq5n #hyundai

[@backshedrc]

Wow, that looks really good.

[@kangyurc-trial6641]

대박이네요~~~^^ 끝내줍니다
주행모습이 보고 싶네요

[@carloshnunez]

Very nice bro
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

[@RCplamodel]

또하나의 작품을 만드시네요!~ 주행영상 빨리 보고 싶어요!~ 실차와 똑같이 만든 IONIQ 5N 정말 멋지네요!!!~~~^^

[@RCPlant]

저도 빨리 주행영상 업로드 하고 싶은데 더디네요ㅋ 감사합니다👍

[@RCMK_X_SMITHMASTER]

SCR Pro에 직접 제작하신 멋진 3D 바디를 장착해 주셔서 감사합니다.
실제 차라고 해도 믿겠네요👍 주행 영상도 기대하겠습니다 🚗💨

[@RCPlant]

감사합니다. 빨리 주행하러 가보겠습니다😄

[@EmotionalRc]

와우!! 디테일 정말 좋은데요! 라이트들도 실차와 똑같구요 빨리 주행기 보여주세요!

[@RCPlant]

첫 주행 도전에서 수신기 쇼트로 소득없이 돌아왔네요ㅎ 감사합니다👍

[@rc_kidult]

사이즈가 어마어마 하군요. 주행 영상도 기대 됩니다 ^^

[@RCPlant]

무거워서 들고 나가기가 힘드네요ㅎ 감사합니다👍

[@rcautoball]

What material of filament did you use? I just finished a 1:5 scale RC Octane from the video game Rocket League. It's printed in TPU, but I used a rubber paint because I was worried that other paints would not stick well. So, my finished RC body does not look anywhere near this good!

[@RCPlant]

I used PLA filament to make this. The surface was polished for a long time using sandpaper and putty. Using automotive paint, I painted in the following order: primer, base coat, and clear coat.

[@davidsinger9911]

Do you make and sell those bodies? I've been looking for a Hyundai Kona N body

[@RCPlant]

It is possible, but it will cost a lot of money to make it. The production cost based on 1/10 scale is $400. Additionally, an additional modeling fee of $100 must be paid. And since overseas shipping costs around $100 in the U.S., a total of around $600 will be needed🥲

[@lashwa086]

Xc90😮😮😢😢

[@RCPlant]

😂