I passed my CCNA1 last year because of your videos and now I'm currently sitting In my classroom working on this packet tracer for the beginning of CCNA2 thank you for educating us...much appreciated 💫
Acabo de pasar mi examen CCNA y no tienes idea de como tu videos me ayudaron a lograrlo, de verdad agradezco de corazón lo que haces y como lo haces. ¡Muchas gracias!
Man thank God for UA-cam 😂Without someone to really hold your hand through this then this can seem like ALOT but I finished during watching so thank you!!
I was stuck not knowing where to find this PTTA. It was a pain in the ass. And here you are Christian, with the file tucked so carefully in the description Once I opened the file on my PT, it was totally worth all the pain Thank you so much!
Well you see I was looking for this file for about 3 days all day. It's supposed to be Module 1. Every time I started Module 2.o the text made a reference about the PTTA file which was supposed to teach abut the use of the packet Tracer and about how to use it and when. However could never fine that Module 1 and there was no link to it.
Thank you, man I’ve been stuck for, this whole Packet Tracer I was in college, and it is due by the end of the weekend! Thank you this video helps a lot. Muchas Gracias!
Thank you so much, it's 2023 now but this video really saved me. I was really worried about not being able to complete because I didn't know if the first step I did was right or not, your guide helped me so much. Like this was due by tomorrow too so thank you😭. As I went through your guide, I noticed it wasn't really that difficult and I knew how to navigate slowly as it went on. Basically there's just a lot of components and tabs that seem scary but as long as we check and read the directions and learn shortcut keys and what each tool or thing does, we should be good!
My version (8.2.0) seems different as my terminal doesn't preview same text as in the tutorial, and there is no option to answer "no" in the terminal and reach the "Router Command Prompt". Anybody having the same issue ?
For those who are wondering the same thing, I found that while using the 8.2.0 version of Packet Tracer, weirdly enough the same problem shows for the console on the laptop. To circumvent this problem on your own, you can also go to the "Backup_Router" itself once it's connected and on the rack. Click on it until you see its properties and go to the "CLI" section; this also acts as a console that you can interact with, without the need for the laptop. Just input "no" and then press enter to continue through the tutorial from there. If all else fails, you can try turning it off and on again and hope for the best... Yea, I didn't say that I was an IT hardware expert, so take it or leave it.
Well you see I was looking for this file for about 3 days all day. It's supposed to be Module 1. Every time I started Module 2.o the text made a reference about the PTTA file which was supposed to teach abut the use of the packet Tracer and about how to use it and when. However could never fine that Module 1 and there was no link to it.
Christian, Please I need help in PTTA as my screen is not having the shelf to locate and installed a back up router. Can anyone help. " Install Backup_Router in the Rack and turn the power on. Locate the Backup_Router on the 4th Shelf. Select and drag the Backup_Router from the Shelf to an empty space on the Rack. Connect Laptop_1 to the Backup_Router with a USB cable. My packet tracer is displaying "1.0.7 Packet tracer" Please assist i have got stock here
Case sensitive had me stuck. the router was configured bit the program did not allow me to move forward until it was configured being case sensitive. wow. Thanks for the help. cheers
I have a hard time finding seward but is it already in the app once you install it? Mine is really basic; there's no city that's made up. It just gives a broad pictures of the intercity, corporate office, and main wiring closet...i'm so lost! haha
Thanks for your video. I am unfortunately stuck at 83% completion and Physical Location is incomplete. I tried over and over but it does not help at all.
I can't understand Christian's accent: The text is so small I can't read it: I thought that this course was to familiarize us with the packet tracer icon's devices etc, Then show us what and why all the Icons are there for. I've never used this tool before so it is overwhelming when Christian says something ounce with out explaining everything about it. I'm the kind of guy that asks why a lot of time before excepting something that is stated without context. I'm sorry if I don't get this at this pace but I don't want to waste my time not getting the message because that is not tutoring.
@@jenberl121 the man is obviously old and might have more difficulty than others using it... don't shame someone for that. learning is learning. im a student who's using this packet tracer thing for the first time and literally is so much stuff, everyone starts somewhere ..
I passed my CCNA1 last year because of your videos and now I'm currently sitting In my classroom working on this packet tracer for the beginning of CCNA2 thank you for educating us...much appreciated 💫
Thank you for all your support , I really appreciate
Acabo de pasar mi examen CCNA y no tienes idea de como tu videos me ayudaron a lograrlo, de verdad agradezco de corazón lo que haces y como lo haces. ¡Muchas gracias!
Gracias por todo tu apoyo, de verdad aprecio mucho tu comentario, lo necesito
Man thank God for UA-cam 😂Without someone to really hold your hand through this then this can seem like ALOT but I finished during watching so thank you!!
Thank you for all your support, I appreciate it
Christian your tutorials have helped me a lot throughout my entire career. I hope I have the chance to meet you one day.
Thank you for all your support, please follow me on social media shown in 00:03 so I will advertise when visit some places
I was stuck not knowing where to find this PTTA. It was a pain in the ass. And here you are Christian, with the file tucked so carefully in the description
Once I opened the file on my PT, it was totally worth all the pain
Thank you so much!
Thank you for all your support, I appreciate it, Go ahead, never surrender
Well you see I was looking for this file for about 3 days all day. It's supposed to be Module 1. Every time I started Module 2.o the text made a reference about the PTTA file which was supposed to teach abut the use of the packet Tracer and about how to use it and when. However could never fine that Module 1 and there was no link to it.
Thank you, man I’ve been stuck for, this whole Packet Tracer I was in college, and it is due by the end of the weekend! Thank you this video helps a lot. Muchas Gracias!
Glad I could help! Thank you my friend
@@romeroc24 your welcome dude!
Thank you so much, it's 2023 now but this video really saved me. I was really worried about not being able to complete because I didn't know if the first step I did was right or not, your guide helped me so much. Like this was due by tomorrow too so thank you😭. As I went through your guide, I noticed it wasn't really that difficult and I knew how to navigate slowly as it went on. Basically there's just a lot of components and tabs that seem scary but as long as we check and read the directions and learn shortcut keys and what each tool or thing does, we should be good!
Thank you for all your support, I appreciate all of your comments, I'm happy
Thank you so much! I was completely stuck but you were a great help kickstarting me off!
Thank you for all your support, I appreciate it
My version (8.2.0) seems different as my terminal doesn't preview same text as in the tutorial, and there is no option to answer "no" in the terminal and reach the "Router Command Prompt". Anybody having the same issue ?
Download the file I shared on the video's description, also verify the router model
@@romeroc24 worked! cheers
For those who are wondering the same thing, I found that while using the 8.2.0 version of Packet Tracer, weirdly enough the same problem shows for the console on the laptop.
To circumvent this problem on your own, you can also go to the "Backup_Router" itself once it's connected and on the rack.
Click on it until you see its properties and go to the "CLI" section; this also acts as a console that you can interact with, without the need for the laptop. Just input "no" and then press enter to continue through the tutorial from there.
If all else fails, you can try turning it off and on again and hope for the best... Yea, I didn't say that I was an IT hardware expert, so take it or leave it.
@@iryn-e1953 Thank you for all your support, I appreciate your comment, I was using PT version 8.1
Excelente Obrigado sou do Brazil thanks
Obrigado, thank you for all your support!!!!!!
Thanks, god bless you man😊
Thank you, I appreciate your comment
thank so much. respect 100%
thank you for all your support, I appreciate it, thank you thank you
Very helpful, thank you 🙂👌
Glad it was helpful!
Thank you for the video!
Thank you my friend!!!
thank you so much Sir Christian :)
thank you for all your support
Me ayudo mucho tu vídeo muchas gracias
Gracias por todo tu apoyo
I did everything step by step but it stays at 83%, it does not recognize the "physical Location" of the Backup Router, thanks
the only way is to start again
@ayrtonlavihelfers8605 I got stuck at the exact same point and I restarted as per your suggestion but unfortunately got stuck again.
Thank you so much.God bless you.
You are so welcome!
I have a Networking class at college and I'm supposed to be downloading packet Tracer and I don't know the newest one right now to download for free
Hello, download the file on video's description, so that will work with this video
@@romeroc24 thank you!
Well you see I was looking for this file for about 3 days all day. It's supposed to be Module 1. Every time I started Module 2.o the text made a reference about the PTTA file which was supposed to teach abut the use of the packet Tracer and about how to use it and when. However could never fine that Module 1 and there was no link to it.
You can use the information on the video's description
Christian, Please I need help in PTTA as my screen is not having the shelf to locate and installed a back up router. Can anyone help.
" Install Backup_Router in the Rack and turn the power on.
Locate the Backup_Router on the 4th Shelf.
Select and drag the Backup_Router from the Shelf to an empty space on the Rack.
Connect Laptop_1 to the Backup_Router with a USB cable.
My packet tracer is displaying "1.0.7 Packet tracer" Please assist i have got stock here
this video will show you all the process, anyway you can send me your file using social media shown in 00:03
@@romeroc24 I will send it, thank you for all you do
thank you so much you helped me alot
Glad I could help! Thank you for all your support!!!!!!!
Thanks. I’m subscribed
Thank you so much, I appreciate
Case sensitive had me stuck. the router was configured bit the program did not allow me to move forward until it was configured being case sensitive. wow. Thanks for the help. cheers
thank you for all your support, be careful always with case sensitive
Love you so much for this
I appreciate it, thank you
Gracias! Thanks!
Thank you my friend! I appreciate
Thanks!🤩
thank you my friend!!!
I have a hard time finding seward but is it already in the app once you install it? Mine is really basic; there's no city that's made up. It just gives a broad pictures of the intercity, corporate office, and main wiring closet...i'm so lost! haha
Hello, please try again using the file I shared on video's description
I can’t find Seward in the intercity it just a blank map I need help
So you can use the video step by step, it is showing all process
Thanks for your video. I am unfortunately stuck at 83% completion and Physical Location is incomplete. I tried over and over but it does not help at all.
OK, try to review all procedures on video and verify conectivity
Thank you!
You're welcome!
I don't have Seward. My PT is blank
Use the packet tracer file I shared on video's description and use PT 8.1
@@romeroc24 i did all the step but i have only 50% complete
@@mustafarakhmetov be careful with the interfaces and devices
it was supportive
thank you, I appreciate your comment
Thank you soo much😊😊
Most welcome 😊. Thank you thank you
Thank you so much
You're most welcome
When I get to 5 C it is blank it has not text there. What do I do?
Remember to connect the USB cable to console cable to the networking device
faking good
thank you for all your support
This video helped thanks!
Glad it helped! I appreciate it
Thank you. Please, where should the text answers be typed? Is it within the task template or where is the answer template?
You don't need to type the answers, the score counts the actions made on the packet tracer file.
Thank you🖤
Thank you for all your support. :-)
For some reason I can’t right click to make the usb bigger
use zoom
tienes el lab 9.3.4 Packet Tracer - Data Center Exploration - Physical Mode no lo encuentro por ningún lado
TRataré de publicarlo lo antes posible, gracias por tu pedido
i have a question how do you create a city ?
you can use the file I shared on video's description
Thank you that was so helpful but mine does not show the lines (wires) it makes me feel confused, could you please reply my comment
you can download the packet tracer file that I shared on the description of the video, and also use packet tracer 8.1.1
very nice
thank you
Hey, my map it’s blank any solutions?
please follow all details of the activity, anyway I'm showing all on the video if there is a bug with your activity
it doesnt let me move the backup router?!
16:40 in the video
@@redhead5932 please use packet tracer 8 or 8.01
@@romeroc24 Same here , it doesn't let me to move the backup router
you don't need to move the router just only review the rear of the device
Thanks!
I appreciate it
Where to get the backup router? Please answer me urgent
you can use the "show run" command to display all configurations and copy those commands to a notepad
Hello Big brother thanks for this tutorial you are saviour, please kindly any playlist for CCNA 2 will appreciate alot . Once again thanks
Thank you for all your support, this is the playlist ua-cam.com/play/PLdtRZtGMukf7eey3OLb-KRM6_LoUYjd-8.html
good thanks
Thank you too!
why my usb is dangling?
thank you, but I need more details
please answer CCNA 3 ENSA Final Skills Exam (PTSA) next
OK, As soon as possible, try this for now ua-cam.com/video/0XXzo02HmUw/v-deo.html
lo tiene en espanol?
no lo tengo en español, pero puedes usar las traducciones en automático en opciones de video
I can't understand Christian's accent: The text is so small I can't read it: I thought that this course was to familiarize us with the packet tracer icon's devices etc, Then show us what and why all the Icons are there for. I've never used this tool before so it is overwhelming when Christian says something ounce with out explaining everything about it. I'm the kind of guy that asks why a lot of time before excepting something that is stated without context. I'm sorry if I don't get this at this pace but I don't want to waste my time not getting the message because that is not tutoring.
I will improve the videos, thank you
really difficult to understand how you add components to intercity?
@@jenberl121 please you can view the video on slow motion using speed x 0.5
@@jenberl121 the man is obviously old and might have more difficulty than others using it... don't shame someone for that. learning is learning. im a student who's using this packet tracer thing for the first time and literally is so much stuff, everyone starts somewhere ..