Liftmaster 8500w Wall Mount Opener Overview
Вставка
- Опубліковано 20 вер 2024
- Product Report on the Liftmaster 8500w Wall Mount Opener.
Features include the following:
*DC Motor
*Includes Battery Back-up
*LED Light
*Built in Wifi for opening, closing, and activating LED Light
*Automatic Lock
This is a top of the line unit and is ideal if wanting to free up ceiling space and/or high lift your garage door.
Thanks for telling me nothing that I needed to know
Great video!
how do you remove the front cover to access the emergency release cable
. the door was closing on a windy day and the pull handle got stuck in the rolls now it does not work i pull the string but nothing happens. the door does not engage.
The top panel of his garage door is not flat whenall the way up. Is this because of the side motor?
I just had a new garage door installed. It takes some force to start to close it. Will this unit work?
I need help. My liftmaster 8500w has an error code 1-6. What does that mean? Can't find the answer anywhere.
Call Liftmaster
Diagnostic Code: 1 Up 6 Down
Why the error code is being displayed: RPM detected after motor shut off at the open position.
Door/Opener Behaviors: The garage door moves down after reaching the open position after the motor has turned off.
Note: RJO openers will show this error code while manually operating the door.
Symptoms/Resolution:
Opener activates and brings the garage door to open position
Opener activates and brings the garage door to open position: Test the balance of a garage door.
Motor attempts to reopen a closing door
Manual disconnect pulled: Reconnect the manual release.
Every so often ours has a problem where when it closes, it'll pop back open and say that Excessive Closing Force detected... Any thoughts? There doesn't seem to a direct force adjustment with these, just the travel adjustment which I then try to redo whenever this starts happening.
These units are very sensitive to any sort of obstruction or if the door is not travelling up and down the tracks smoothly it will sense a drag and it will pop back up.
I had one where the door was dragging on the climate seals/ door stops and from time to time the door would go back up. Release the door and move it up and down and make sure it is nice and free. Also make sure the down limit has not been set too far.Use bee wax if you need to.Hope this helps
Remote so sensitive good thing i turn back my head i saw my garage door was open again. My remote was inside my purse it might press accidentally.
Getting ready to build. My ceilings are 14 feet. My garage doors are 12 feet. Can I still have my doors hug the ceiling? Or do I need to go 13 foot high doors?
How do you program the remote
I installed one, I like it but even though I leveled it correctly, it has a slight wiggle when running. Is that normal? Thanks
I have the same "problem" - if you watch his unit its doing the exact same thing! thinking that might be normal
We normally level the unit before tightening up the set screws at the side of the torsion tube. That seems to work for us.
Level the unit, then tight the sets screws. Hope this helps Miguel.
Nofziger Door just installed this unit at my house today, and it does have a slight wiggle.
We have a chain on ours to open manually, does this get installed beside that mechanism and just over rides the chain? or do you have to remove the chain first?
Is it still possible to manually open the door with this opener installed?
Yes Brad you can. You can disengage this motor just like any normal garage door opener
How to fors adjust
Any idea how to add a key release from the outside? I don't have an entrance other than the garage door so if mine breaks I'm out of luck
Certainly sounds like it. I haven't seen one yet in these vids.
Where did you get battery backup?