IoT Temperature Based Automatic Fan Speed Control & Monitoring System using ESP8266 & Blynk 2.0

Поділитися
Вставка
  • Опубліковано 26 січ 2025

КОМЕНТАРІ • 47

  • @tech_jinn
    @tech_jinn Рік тому +2

    Very clear description of the coding on this. I find that really useful because most of the time people only tell you what to download.

  • @varunpatil5270
    @varunpatil5270 3 місяці тому

    Can we use Breadboard instead of PCB board

  • @pritamsarkar2649
    @pritamsarkar2649 Рік тому +1

    Can we use oled display instead of 16×2 display module.?

  • @sathyasrev
    @sathyasrev 2 роки тому +4

    Sir please Tell that ....This project can use for Ac fans?

    • @bullygram
      @bullygram 9 місяців тому

      That’s a madam😅 and not sir
      Just use a relay instead of the motor driver. If she uses a pwm then try changing it to digital on off.
      Word of warning, give at least 200ms delay while turning on and off the relay.

  • @Aizen1677
    @Aizen1677 9 місяців тому

    can you tell if there is potentiometer is used in this model ?and if yes ,where it is connected along?
    plzzz

  • @srinithibalasubramaniyam8982
    @srinithibalasubramaniyam8982 3 місяці тому

    Its very clear and i choose this for my mini project ❤but the backside of pcb wiring is confused ,could you explain this😢mam

  • @sillylittlecatonline
    @sillylittlecatonline Рік тому

    How can we add a heating system tho? As well as keep the fan?

  • @usmanumarmuhammad4571
    @usmanumarmuhammad4571 11 місяців тому

    Great work sir.
    What if i want to remove the iot features.
    And the codes and components connection .

  • @Vijay-ey6ot
    @Vijay-ey6ot 11 місяців тому

    is esp8266 digital pin able to open gate of irf540n please reply soon

  • @aratinaik586
    @aratinaik586 9 місяців тому

    Can you tell me, this connection in breadboard

  • @Jvavolerpareil
    @Jvavolerpareil 2 роки тому

    Well, I don't appreciate embedded ads ! Why you don't just put a note with a link in the description ?

  • @gwyne4192
    @gwyne4192 Рік тому

    I'm a beginner, how do I make app in iOS and connect it to the Arduino?

  • @marcopereira6641
    @marcopereira6641 Рік тому

    Já fez teste , de desligar e ligar Novamente a fonte da energia , pra ver o comportamento do funcionamento??

  • @diyprojectslab1689
    @diyprojectslab1689 2 роки тому

    I am thankful to you. you do so much hard work for us.💕💕

    • @vikramacademy8171
      @vikramacademy8171 Місяць тому

      Can you explain or send the correct circuit diagram

  • @gauravghosh6562
    @gauravghosh6562 Рік тому

    GAURAV GHOSH
    how long did you take to do this?

  • @dazzler6871
    @dazzler6871 Рік тому

    Hi brilliant video ...what is the respose speed of this please ? i need to maintain a consistant water temp to 1 degree using a 12v water pump will this work ??

  • @dhanush3350
    @dhanush3350 Рік тому

    Can we use nodemcu

  • @theexperimentlab7887
    @theexperimentlab7887 2 роки тому

    I am just waiting to this video 🎉

  • @mrsanjaiyt3722
    @mrsanjaiyt3722 Рік тому

    What is the purpose of using power jack in this circuit

  • @matthiash.454
    @matthiash.454 2 роки тому +1

    Super project👍🏼 question: can you maybe next time make the wiring diagram with the "Fritzing Software" 🤔❓finde I easier to understand 😊

    • @HowtoElectronics
      @HowtoElectronics  2 роки тому +1

      Sure thanks i will try next time. The problem here was not all the modules were available.

  • @moonchamooncha2043
    @moonchamooncha2043 Рік тому

    Hi, can we use battery instead of a ac power adapter

  • @majaharali125
    @majaharali125 9 місяців тому

    Nice project, can you next time setup a IoT based fruit Monitoring project using ESP8266 board.

    • @Aizen1677
      @Aizen1677 9 місяців тому

      is it working for you brother?

  • @JoNorthkeeper
    @JoNorthkeeper Рік тому

    Thanks, works fine

  • @iotprojectsideas
    @iotprojectsideas 2 роки тому

    Nice tutorial

  • @038dineshkumars7
    @038dineshkumars7 Рік тому +1

    I can't understand

  • @vidwathsuryat6236
    @vidwathsuryat6236 Рік тому

    boli shede work aythilla

  • @thinkbeyond5360
    @thinkbeyond5360 2 роки тому

    Very nice

  • @kabitachand6082
    @kabitachand6082 2 роки тому

    👍👍

  • @dazzler6871
    @dazzler6871 Рік тому

    i Neeeed this ….

  • @himanshu2232
    @himanshu2232 2 роки тому

    Nice

  • @vardhanvaru7596
    @vardhanvaru7596 2 роки тому

    Budjett

  • @spbg5071
    @spbg5071 Рік тому

    Do AC 220v fan speed control using this method...????😂 On youtube Everyone do easy DC 12v unusable tiny fan speed control and make video.
    There is no use of this fan .

    • @HowtoElectronics
      @HowtoElectronics  Рік тому +1

      You need triac to control the AC Fan

    • @spbg5071
      @spbg5071 Рік тому

      @@HowtoElectronics can triac control in this IoT temperature based controller .
      I am using a manual triac speed controller.

    • @HowtoElectronics
      @HowtoElectronics  Рік тому +1

      I will make a video on that in a month. Please wait.

    • @spbg5071
      @spbg5071 Рік тому

      @@HowtoElectronics thanku very much.... waiting for video.

    • @navaneetht3042
      @navaneetht3042 9 місяців тому

      There is some error in the program
      After compiling plz uplod the correct
      We are making this project as our mini project in clg plz help

  • @aratinaik586
    @aratinaik586 9 місяців тому

    Can you tell me, this connection in breadboard