Even though I have adjusted tappet perfectly with 0.06 and exhaust with 0.08 but little bit of sound coming what do i need to do mext ❤ plz answer brother
●First be 100% sure that, the sound is coming from tappet😄, their is various type of sounds come from engine, a loosen timing chain also make noise. ●tappet noise tik tik tik will be loud like you don't have to concentrate, if you get closer to the engine, you can easily listen to this noise. ●if your cam got worn and old, standard 0.06 0.08 mm will not work. you have to decrease the value. ●these observations are only valid while considering that setting has done by a professional. otherwise I have more points. ●Lastly always observe these when engine is hot after Riding at least 15min
@@Fan-of-naayagan Nope, does not matter how much km your bike ran, matter is how much care you have taken during this time, hopefully you had changed engine oil time to time, if yes then your cam will be okey and no need to change the mm. You should focus on other points I mentioned.
Bhai mera 2021 model Apache rtr 200 4v 15000 kilometer hochuka hai abhi bike ki pickup or pulling bahut kam lagtha 🥲 hai tappet ki awaz kuch nayi sunayi detha.. Ye sayi karne keliye Kya karna padegi
Bhai mera v same bike hai.... Sirf 1000 km he chala hai... Tappet noise aata hai... Jab engine heat hota hai tab... Agar isko abhi set na kru toh koi problem to nhi?
Mya aap ka comment thora modify kar raha hu by changing some words... ''teeth pe pain hota hai..... Jab mya khana khata hu tab... Agar isko avi doctor na dikhau to koi problem to nehi ? ''
Excellent video brother 👏🏻💯
Great video brother
Thanks brother for sharing knowledge
Thanks ❤❤❤❤
Nice knowledge
Thanks
Nice❤
Even though I have adjusted tappet perfectly with 0.06 and exhaust with 0.08 but little bit of sound coming what do i need to do mext ❤ plz answer brother
●First be 100% sure that, the sound is coming from tappet😄, their is various type of sounds come from engine, a loosen timing chain also make noise.
●tappet noise tik tik tik will be loud like you don't have to concentrate, if you get closer to the engine, you can easily listen to this noise.
●if your cam got worn and old, standard 0.06 0.08 mm will not work. you have to decrease the value.
●these observations are only valid while considering that setting has done by a professional. otherwise I have more points.
●Lastly always observe these when engine is hot after Riding at least 15min
@@megapiston23 brother I have ran 37000km
With mine 160 4v what would you recommend the mm can i reduce both a side with MINIZATION on both mm
@@Fan-of-naayagan Nope, does not matter how much km your bike ran, matter is how much care you have taken during this time, hopefully you had changed engine oil time to time, if yes then your cam will be okey and no need to change the mm. You should focus on other points I mentioned.
Bhai mera 2021 model Apache rtr 200 4v 15000 kilometer hochuka hai abhi bike ki pickup or pulling bahut kam lagtha 🥲 hai tappet ki awaz kuch nayi sunayi detha..
Ye sayi karne keliye Kya karna padegi
clutch plate check karna parega
@@megapiston23 Haa ok bro wo bhi check karwayegi 😊
carburetor tuning par video banaye
ua-cam.com/video/PqeZcHUYrNc/v-deo.html
160 4v mein dono taraf 0.06mm karni hai ya 0.06 aur 0.08mm
6 & 8
Nahi Bhai donor side 0.06 mm rakhna he.kyun Ki ye bs6 bike he .bs4 bike intek 0.06mm aur exhaust side 0.08 mm he
@@ManojPadhan-cd4os Ok, Thanks for the information.
❤❤
Bhai mera v same bike hai.... Sirf 1000 km he chala hai... Tappet noise aata hai... Jab engine heat hota hai tab... Agar isko abhi set na kru toh koi problem to nhi?
Mya aap ka comment thora modify kar raha hu by changing some words... ''teeth pe pain hota hai..... Jab mya khana khata hu tab... Agar isko avi doctor na dikhau to koi problem to nehi ? ''
Engine ka koi bhi kam pending pe mat rakho.time nikalke sahi karvalo nahi to engine ki life kam hoti he.
Valve ❌ Bhalve✅😂
Parnav❌ pornhub✅🤣🤣🤣🤣
Nice❤