Givi XE135 - Brake light for topcase
Вставка
- Опубліковано 15 вер 2022
- Hello Fellow riders/youtube people
I have top case but I don`t have breaklights in it, so let`s do that today.
GIVI XE 135 Stop Light Kit, what is it and how to install.
Have fun and enjoy. - Авто та транспорт
Nice work Andy, well done.
Profesjonalna robota panie Jędrek. 😀
That is an awesome job. This video is like a meditation from the regular chaos in India. I wish I had the time that you have.
very nice install ! i'm next !! thank you
I like the way you explain in this videos, all cristal clear, not such conmon thing on youtube, I have tried to build up an installation for this, didn´t know the givi kit, and eventually got to the same type of installation, but better with the givi kit, so im going to try :).
Good and clean job!!
Świetny filmik
Great vidio. Nice job. Tanks for share.
I did this today following these steps. My top case is a Givi V47NNT, and the process is exactly the same. My top case can't have a customized keylock but all the rest was the same. I purchased the E135 brake lights from Givi and the bike plate from a Kawasaki dealer. I had to glue the connector to the plate using a bi-component glue like Andy, otherwise it was likely the connector to move and fail wiring connection between the case and the plate. Thanks a lot Andy for another very helpful video!
I'm glad everything worked out, I hope this brake light will serve you for a long time, and of course I'm glad I could help. take care😃
Quite a complicated installation, but nice result in the end for your hard work. 👍
Very Nice Work
Your video was a great help!! Thank you! The only thing I did different was instead of glueing the contact at the right height I inserted 2 rubber rings. Let's see if this works in the long run...
Nice job, instead of soldering I use posi tap connectors, they never fail.
Nice work, you are verry good mekanic 👍
Dobra robota, dzięki za podpowiedź :)
You have a lot of patience with that connector on the base plate. I would’ve just drilled a hole in the back corner and used an SAE connector. Good job !
Thank you great tutorial! 👍
Great tutorial :)
Good job 👏
Prima Arbeit, das gleiche instaliere ich an meiner honda St 1300 Pan european
Salut Andy,voilà j ai retrouvé la vidéo👍✌
thank it was a good presentation, I want to put the same in a Kawa GLR 1400...
Top, dank voor de link
Shad case on my versys,, will see if there is something similar. Not sure if it's legal in Spain🚔, will investigate too 👍 thanks a lot for your videos Andy
Next episode: MotoAndy installing rear fog light 🤣 Great job Andy! 👍
You almost guessed it, definitely in the back😂
Obrigado pelo vídeo, talvez eu não faça pelo preço dessa peça no Brasil, ou pela dificuldade da base Kawasaki.
Pełna zgoda co do jakości kufrów Kawasaki w stosunku to tych firmowanych przez Givi. Mam ten od Kawasaki i ten sam problem co Ty widoczny po zamknięciu kufra w 26:57. Niezależnie od tego jak ustawię zamek, klapa kufra nigdy nie przylega do dolnej części mniej więcej od połowy kufra. Porównywaliśmy to z kolegą, który używa kufra Givi i u niego problem nie występuje. O dzwonieniu na pusto już nawet nie wspominam :)
Na szczęście nie przeciekają (o dziwo) 🙂
Hi Andy, Came across your video for the Givi brake light. I am in the process of adding extra tail lights to my Versys 1000GT and i was wondering if you know the part no for the brake light connectors you spliced into (both male and female sides). I intend to fit an extension lead between the male/female connectors rather than splice into the actual connector. I will then run off a lead (from the red wire) for use as an ignition trigger wire for a relay
The FIRST🤩
🤣
@@MotoAndy je suis admiratif comme tu te débrouilles seul pour customiser notre moto préférée Versys 1000 Forever
There is no need to glue it to be at horizontal level , just put it in a drilled hole and that's it. I did it that way and it works well.
i tried to do that in my previous versys and it didn't work, the socket was misaligned and very often there was no connection and the light didn't work
No has intentado agregar luces a los Maletas laterales?
if i don't have such led lamp, what type of led can be used or compatible with it? Thanks before
Looks great but most cars drivers wond see the top box lights . Maybe if in a sub, land rover or discovery, Lorry's driver may see it. Nice work though.
So it appears as though if I choose to add a top case with brakelights, I should use the Givi base instead of the Kawasaki to avoid the issue you ran into? I am enjoying your videos by the way.
Well, that sounds logical, unfortunately I'm afraid that the original GIVI base will not fit the Versys, because it is of a completely different shape
We that sucks..
Pena que esses acessórios não chegam no Brasil.
Eu consegui comprar aqui no Brasil na loja Espaço Warrior por um preço que achei justo, já realizei a instalação e ficou Topppp. Thanks Andy for your excellent video as usual.
Zou het makkelijker zijn om de Givi base plate op de Versys te installeren, of past dat niet ?
givi past niet
heeft een andere schroefbevestiging
Extra
Hoe vervang je de Knipperlichten voor en achter voor Led Kawasaki Versys 650 2017 krijg de voeten niet los uit de kappen en waar zit de relet
Ik rijd Versys 1000, maar je moet de kappen demonteren en van binnenuit zou er een plaat en een schroef moeten zijn die de hele richtingaanwijzer vasthoudt, relay in 650 heb ik geen idee.
Bedankt voor de info had gehoopt dat het gekund had zonder de kappen te verwijderen
what is the part number for the light kit
Givi XE 135
@@MotoAndy thank you
Waar kan je ze bestellen en wat kosten ze
www.rad.eu/nl/c/p/37278-givi-v47-stoplichtkit-e135.htm
hioi Andy heb je een linkje waar je hem gekocht heb
www.rad.eu/nl/c/p/37278-givi-v47-stoplichtkit-e135.htm?gclid=Cj0KCQjwj7CZBhDHARIsAPPWv3c-HZL-RCrkBwF-D8DTlDrDtVVAgMevFKP4wDtcxK_5fnktxDzNLw4aAkVaEALw_wcB%2cCj0KCQjwj7CZBhDHARIsAPPWv3c-HZL-RCrkBwF-D8DTlDrDtVVAgMevFKP4wDtcxK_5fnktxDzNLw4aAkVaEALw_wcB&TradeTracker-NL&Affiliate&
@@MotoAndy thanks
It is sad that the plate wasn't designed for this modification. Poor engineering. Does Givi offer a plate?
you can buy a givi base plate, but in addition you need to buy an additional rack (for the base plate), the plate itself does not fit
After receiving my box of the givi E135 kit in the mail, high-lighted on the outside package in neon green says this light kit can not be used on the M8 or M9 aluminum top case mount pads. I have an alum mount on my ‘07 Honda ST1300. I am installing it anyway to see what happens.
My Versys 650 comes with a Givi top case mount so i didn't have to drill holes and the like@@pdx650
You did great but that design has too many points of failure
it has been working without problems for 2 years, in my previous Versys it worked for 4 years without problems, so the conclusion is simple, if you do everything correctly, it should work 😁
@@MotoAndy you are a great engineer bro. Great work.
Thanks for sharing!