I have a blazer that has like 19cm extra length im going to do all this steps its very helpful and i can see the experience and professionalism at your amazing and neat work hats down to you and respect ❤️
@@Aysha-hx6cb oh ok, my sleeves are usually 7/8cm too long because fashion now warts the shirt at the start of the thumb, while it should be at the start of the hand, and same thing goes for the jacket
Sewing the lining to the sleeve from the inside is not the professional way.. that is what is done during production or better yet mass production. I am a tailor, hand sewing is the professional way. This is one of the many differences between a tailor and a seamstress.
@@georgethetailor2768 most people want the alteration the way it was originally (by machine). Both ways are correct, regardless if you are a tailor or a seamstress.
Hi George. What if I have to shorten suit sleeves with perforated buttonholes! I have left them in the inside of the hem & done new fake ones. I have read that taking off from the sleeve cap can only be done up to 2”. I have had to shorten lately two suit jackets 3”. What do you say?
Good morning ,thanks so muvh for sharing your knowledge qith us ,i was wondering if you won't mind to made a video of how to ahorten sleeves on a suit jacket perhaps 2" or more on the sleeves and add a funcional button hole have a great day . Thanks
Hi George. Thank you for your informative video's. My son has asked me to alter two suits for him as they are too big. Can you do some video's where you take in a suit jacket, including the arms, also how to correctly taper in suit trousers as I'm not sure if one or both sides are to be taken in. With thanks.
A master doing his trade. I have always said I will pay top dollar for a master tailor. I just don’t want to pay top dollar for a new person. Being a master tailor takes time and with time comes the big money. I remember the first time I had a hand made suite made and the tailor came to my office. And his skill and craftsmanship was beyond anything that had ever seen. When he asked if I liked stuff I just said let me pick a few colors and give you an idea what I like and after that I wanted him to do what he does. I had trust in whatever he thought. I was 23 years old and I’m 44 now. It will always be one of my favorites. We always remember our first MontBlanc pen the first Rolex and the first handmade suite.
If I am shortening more than 2.5 inches then I will cut off a little fabric. Otherwise, I leave the fabric inside to give the sleeves some body and allow the fabric to hang better
Thanks a lot George,i was looking for a useful video about 3 hours in UA-cam, to remind shorten sleeve after 3 years not doing it .finally i find the best tutorial ever,not only was a refresher but also i learned alot more thanks again to being great and share your knowledge with us
I have a tailer who said he's going to shorten the sleeves on my glen check pattern jacket from the shoulder area. He promised the pattern will still match but I thought it would be easier to do it from the bottom as you did in your video. Is this a red flag?
Hello, perhaps you can advise me on a problem I have had a few times. The top vent is not sitting flat on the bottom vent. There is a fold of material about 1 cm next to the 3rd button up from the cuff. What am I doing wrong and what can I do to fix it? Thank you for any help you can offer
George, Hi, I'm looking at a high end Jacket on ebay with the buttons cut (working) Sleeve is 26 1/2 inch and needs to be 25 1/2. The buttonholes are far enough from the sleeve that I suspect 1/2 inch is possible but at 26" I will still look like I am wearing my older brothers jacket. Any pro tricks or nothing to be done with cut buttons? Putting a strip of material over the buttons is not an acceptable option.
This is the best sleeves shortening tutorial on youtube
He does it so effortlessly!
I love watching a master-level craftsman demonstrate what decades of skill-building looks like in action. It's like watching an artist paint.
He made it all so simple but boy amount of work goes into it.
One of the best examples of #suit #alterations on UA-cam! Great work & Upload! #howtosew #suitalterations #shortensleeves
It's hard to see what you're doing when you close the vent, I'm just learning so it's tough to follow step by step here, but it looks great!
Thank you for your knowledge and talent!❤
Thank you for your step by step video.
That's the best way to Shorten sleeves
Where is possible to get a button placement guilde like the you made I've tried to make one but it don't come out right! not measuring the distant!
Beautiful! Thanks for sharing with us.
Thank you ❤
Γεια σας κύριε Γιώργο!!σας βρηκα στο τικ τοκ ,καλή χρόνια από Ελλάδα !
I have a blazer that has like 19cm extra length im going to do all this steps its very helpful and i can see the experience and professionalism at your amazing and neat work hats down to you and respect ❤️
19cm extra? Are you shure it fits your shoulders?
@@aguy9893 yes it fits but the model of the jacket was long sleeve type it was from fast fashion but a pricey fast fashion
@@Aysha-hx6cb oh ok, my sleeves are usually 7/8cm too long because fashion now warts the shirt at the start of the thumb, while it should be at the start of the hand, and same thing goes for the jacket
@@aguy9893 yes yes totally agree with that they extend the length a bit more than usual 👍🏽👍🏽
Beautiful!
Can't believe that he did not finish the lining in the professional way - sewing it to the sleeve from the inside!!
Sewing the lining to the sleeve from the inside is not the professional way.. that is what is done during production or better yet mass production. I am a tailor, hand sewing is the professional way. This is one of the many differences between a tailor and a seamstress.
@@georgethetailor2768 so true ❤️
@@georgethetailor2768 most people want the alteration the way it was originally (by machine). Both ways are correct, regardless if you are a tailor or a seamstress.
Excellent!!!!
wondering how are they going to do it with real buttonholes
Has to be done from shoulder
Nice speedrun
This is a no BS tutorial I love it
Hi George. What if I have to shorten suit sleeves with perforated buttonholes! I have left them in the inside of the hem & done new fake ones. I have read that taking off from the sleeve cap can only be done up to 2”. I have had to shorten lately two suit jackets 3”. What do you say?
Thank you George for this awesome video.
I will be reviewing it as I take the challenge before.
I appreciate your gift and talent.
All this work and for like 30 bucks...
Guys tip your tailor
Hello, can you tell me please which interfacing you use. Which companies you recommend. Thank you.
I'm having a problem in knowing what to grab when closing the Vent! And do you answer this question with a reply?
Good morning ,thanks so muvh for sharing your knowledge qith us ,i was wondering if you won't mind to made a video of how to ahorten sleeves on a suit jacket perhaps 2" or more on the sleeves and add a funcional button hole have a great day .
Thanks
Oh my the razor knife scares me. He is very capable and brave! I would have cut the sleeve and my hand!
Hi George. Thank you for your informative video's. My son has asked me to alter two suits for him as they are too big. Can you do some video's where you take in a suit jacket, including the arms, also how to correctly taper in suit trousers as I'm not sure if one or both sides are to be taken in. With thanks.
I go to two different tailors to shorten my suit sleeves and they both come back crooked, not straight across.
Wow.
I have nothing more eloquent to say than that. 👏🏼
I have a wedding in 3 days and i face this problem i dont know what should i do
You know he’s a master when he uses a box cutter to rip seams!!
It's crazy to think how much work goes into it! Amazing job, George!
Best shorten 😊sleeves tutorial , you are the master
A master doing his trade. I have always said I will pay top dollar for a master tailor. I just don’t want to pay top dollar for a new person. Being a master tailor takes time and with time comes the big money. I remember the first time I had a hand made suite made and the tailor came to my office. And his skill and craftsmanship was beyond anything that had ever seen. When he asked if I liked stuff I just said let me pick a few colors and give you an idea what I like and after that I wanted him to do what he does. I had trust in whatever he thought. I was 23 years old and I’m 44 now. It will always be one of my favorites. We always remember our first MontBlanc pen the first Rolex and the first handmade suite.
This is amazing. Thank you so much!!!
Why do you not cut the excess material off? What if you are shortening a thicker wool jacket, wouldn't leaving the material on be bulky?
If I am shortening more than 2.5 inches then I will cut off a little fabric. Otherwise, I leave the fabric inside to give the sleeves some body and allow the fabric to hang better
This is the best shortening thanks
This is an excellent video. Thank you very much.
Thankyou this is a very clean way to shorten the sleeve I'm very grateful for showing us
Thanks 🙏
excellent
Thanks a lot George,i was looking for a useful video about 3 hours in UA-cam, to remind shorten sleeve after 3 years not doing it .finally i find the best tutorial ever,not only was a refresher but also i learned alot more thanks again to being great and share your knowledge with us
Glad this helped, thanks for watching!!
very interesting thank you
Beautiful Tailoring!
It’s good to see it done by hand, thanks.
Thank you, for sharing this!
I have a tailer who said he's going to shorten the sleeves on my glen check pattern jacket from the shoulder area. He promised the pattern will still match but I thought it would be easier to do it from the bottom as you did in your video. Is this a red flag?
I wish I had your talent and speed, just incredible 🙏
Hello, perhaps you can advise me on a problem I have had a few times. The top vent is not sitting flat on the bottom vent. There is a fold of material about 1 cm next to the 3rd button up from the cuff. What am I doing wrong and what can I do to fix it?
Thank you for any help you can offer
I have wach several videos, however by far your's I understand the best God bless you
Superb workmanship. I shall be practicing this technique repeatedly until I perfect it.
ThaNkYOU you make my work so easy🎉
I wish there was a bit more description of the steps. Like how you chose where to draw the line for the miter -
I've really enjoyed thank you once again lovely xxxxx
To professional for me And fast but beautiful to see such experience
I am so amazed at your video.
You are bad. Love that miter and those buttons
Lots of thanks, very classical work
Thank you this is very helpful ☺😊.
George, Hi, I'm looking at a high end Jacket on ebay with the buttons cut (working) Sleeve is 26 1/2 inch and needs to be 25 1/2. The buttonholes are far enough from the sleeve that I suspect 1/2 inch is possible but at 26" I will still look like I am wearing my older brothers jacket. Any pro tricks or nothing to be done with cut buttons? Putting a strip of material over the buttons is not an acceptable option.
It's done from the shoulder, not the cuff.
This guy's The Flash of taylors
I’m so happy to stumble upon you
Very interesting thank you
Muy buen vídeo, gracias por enseñarnos. Bendiciones.
Thamks for the video
this guy is so chill and nice
The best I have seen
Thank you
this is wow!