Thanks so much Andrew. The biggest reason for God leading me to start this channel was to help those that live in creation, come to know God the creator in a personal way and come to know about his love and plan of salvation for those that put their faith in him. Thanks for the encouragement it means a lot! God bless you richly!
That tool is ok,but the DU-BRO Kwik Twist Fishing Tool makes smaller loops and it's like $15 on Amazon. It's a little slower because of the processes you have to go through but the baits will have more of a factory look/size to them,it can do up to .032" wire. There is one downfall with the tool though,the little button on top is brittle and can break off easily,it's only chrome or nickle brass.Had it happen to mine but after a couple minutes thinking what I could do to fix it and another 5-10min to do it it ended up better than it was originally.To fix it I just took a drill bit about the size of that button drilled down about 1/4" in the center where the button broke off.I then figured out how long that new piece was going to need and cut the end off the bit that goes into the drill (cheap cheap bit set).Then I used a dremel with a cut off wheel and add a slight groove where the wire would be riding (all the while testing the height and depth by putting it into the tool and eyeing it up).Once I was happy where it needed to be I did a test bend by putting the new piece into the hole that was drilled.If it was to high I just ground a little off the end of the piece that goes into the tool till it was right.To low and I just filled in the hole with some fine metal shavings. After all that I added a dab of JB Weld to the hole and pushed the piece in and left it cure.Later once it was dry I tested it again by making some loops and if the allen key (tool they send to twist the wire loop) was catching the new pin I just ground it down a little and rounded it over some. Now it's better than it was new,the new pin is hardened tool steel although low quality. I actually have 2 of the tools (they sent another after the 1st broke off),I use the one I repaired to finish the loops and the other I keep in a small jewelers vise just to bend the loop.
Good info on construction idea's, but I think this is the first lure video that has eternal value beyond fish. Kinda of a big deal who's the first voice you hear after you die. For me Jesus'.
Amen brother! I hope others hear the message in the video and God uses it to touch hearts that people might come to know him as well! Thanks so much for watching and sharing and may God bless you richly!
This channel isn't just about fishing or enjoying the outdoors. The reason it exists is to help connect those that love creation with the one who created it. Each of us have sin in our heart and separated far from God. I've lived both sides of the coin. I lived far from God doing my own thing and following after sin, and my own selfish desires. Then someone cared enough to tell me that God loved me so much that he sent his Son Jesus Christ to die in my place and pay the penalty for my sins, and that if I repented and believed God would forgive me of my sins and adopt me as his own (John 1:12) It was then that I felt God drawing me to himself and realized that I couldn't earn my way to heaven, but that God had already made a way. It was then that I turned from the direction I was going in and put my faith in Jesus and his gift on the cross. From that point God changed me from the inside out and I have never been the same again. I think the greatest question everyone of us needs to ask our self is if I would die tonight (and someday each one of us will die) would I spend eternity in heaven or hell? Most people never understand their need for God until it is too late. They only see themselves as good people not realizing that unless their sins are forgiven through Christ they will spend eternity separated from God in hell. That is why I share this good news of Jesus with everyone willing to hear it and that was the whole reason in starting this channel. God loves you my friend and his arms are open wide all you need to do is turn and put your faith in him. My prayer is that God draws you to himself as well and may God touch your heart and your life!
thanks for the encouragement Iwas saved @ 15 but some people when they get an education think they are great thanks for the info peace brother there is a site that makes spinners I think they are butterfly spinners check him out tu lan
Thanks so much! So glad to hear that you gave your heart to Christ. Thanks for sharing that! May you grow deeper and deeper in your relationship with him! Thanks to taking the time to watch and to comment it means a lot! Take care brother and may God bless you richly!
I was very glad to see you witness in your video
Thanks so much Andrew. The biggest reason for God leading me to start this channel was to help those that live in creation, come to know God the creator in a personal way and come to know about his love and plan of salvation for those that put their faith in him. Thanks for the encouragement it means a lot! God bless you richly!
@@thefrugalsportsman He has both in the people I meet personally and in Christina brothers like you online
That is so awesome to hear my friend! May God bless you in every way!
Very good and helpful info. Thanks for sharing your methods and message with us.
You are more than welcome and I am so glad it was helpful to you! I appreciate your comments! Blessings!
Another great video!
Glad you enjoyed it! Thanks so much for watching and sharing! May God bless you richly!
Great job buddy!!
Thank you and God bless!
That tool is ok,but the DU-BRO Kwik Twist Fishing Tool makes smaller loops and it's like $15 on Amazon.
It's a little slower because of the processes you have to go through but the baits will have more of a factory look/size to them,it can do up to .032" wire.
There is one downfall with the tool though,the little button on top is brittle and can break off easily,it's only chrome or nickle brass.Had it happen to mine but after a couple minutes thinking what I could do to fix it and another 5-10min to do it it ended up better than it was originally.To fix it I just took a drill bit about the size of that button drilled down about 1/4" in the center where the button broke off.I then figured out how long that new piece was going to need and cut the end off the bit that goes into the drill (cheap cheap bit set).Then I used a dremel with a cut off wheel and add a slight groove where the wire would be riding (all the while testing the height and depth by putting it into the tool and eyeing it up).Once I was happy where it needed to be I did a test bend by putting the new piece into the hole that was drilled.If it was to high I just ground a little off the end of the piece that goes into the tool till it was right.To low and I just filled in the hole with some fine metal shavings.
After all that I added a dab of JB Weld to the hole and pushed the piece in and left it cure.Later once it was dry I tested it again by making some loops and if the allen key (tool they send to twist the wire loop) was catching the new pin I just ground it down a little and rounded it over some.
Now it's better than it was new,the new pin is hardened tool steel although low quality.
I actually have 2 of the tools (they sent another after the 1st broke off),I use the one I repaired to finish the loops and the other I keep in a small jewelers vise just to bend the loop.
I haven't heard of that tool so thanks for sharing that with us. Sounds like something to check out. Thanks so much. Take care and God bless!
Good info on construction idea's, but I think this is the first lure video that has eternal value beyond fish. Kinda of a big deal who's the first voice you hear after you die. For me Jesus'.
Amen brother! I hope others hear the message in the video and God uses it to touch hearts that people might come to know him as well! Thanks so much for watching and sharing and may God bless you richly!
Excellent how-to videos. Can't find you on Rumble. I don't subscribe to anything on UA-cam because the company is so evil.
Thanks for the encouragement and for watching. May God bless you!
dont need preaching on a fishing channel
This channel isn't just about fishing or enjoying the outdoors. The reason it exists is to help connect those that love creation with the one who created it. Each of us have sin in our heart and separated far from God. I've lived both sides of the coin. I lived far from God doing my own thing and following after sin, and my own selfish desires. Then someone cared enough to tell me that God loved me so much that he sent his Son Jesus Christ to die in my place and pay the penalty for my sins, and that if I repented and believed God would forgive me of my sins and adopt me as his own (John 1:12) It was then that I felt God drawing me to himself and realized that I couldn't earn my way to heaven, but that God had already made a way. It was then that I turned from the direction I was going in and put my faith in Jesus and his gift on the cross. From that point God changed me from the inside out and I have never been the same again. I think the greatest question everyone of us needs to ask our self is if I would die tonight (and someday each one of us will die) would I spend eternity in heaven or hell? Most people never understand their need for God until it is too late. They only see themselves as good people not realizing that unless their sins are forgiven through Christ they will spend eternity separated from God in hell. That is why I share this good news of Jesus with everyone willing to hear it and that was the whole reason in starting this channel. God loves you my friend and his arms are open wide all you need to do is turn and put your faith in him. My prayer is that God draws you to himself as well and may God touch your heart and your life!
thanks for the encouragement Iwas saved @ 15 but some people when they get an education think they are great thanks for the info peace brother there is a site that makes spinners I think they are butterfly spinners check him out tu lan
Thanks so much! So glad to hear that you gave your heart to Christ. Thanks for sharing that! May you grow deeper and deeper in your relationship with him! Thanks to taking the time to watch and to comment it means a lot! Take care brother and may God bless you richly!