Sir, recently I've purchased Grandstream HT801 Analog Telephone Adapter and after doing successful registration, I can receive calls without any issue but when I'm trying to make a call it says "The number you have dialed is invalid". Even I tried adding 0 at the beginning but it always says the same. I can't figure out the problem. Please help me. I can share the Web UI settings of the ATA with you.
@@geekytwins I purchased it because I already have cordless landlines in my home and if I switch to IP Landphone then it will be a problem in terms of mobility and IP Cordless phones are bit too expensive in India. So, rather I prefer to buy an ATA ..... Though my problem was solved which I mentioned in my comment earlier.... The default dial plan was not in Indian Standard... So, I was supposed to change the dial plan and it works perfectly and thanks for your suggestion ❣️
@@DebankurMandal-y6z That makes sense and I'm glad your problem got resolved! Have fun with the unlimited calls, brdr! Thanks for the continued support!
my Sercomm AOT-4221SR is configured in bridge mode now. i can replace it with XZ000-g3 v2 and setup tagged vlan 660 in router. hopefully any softphone or ATA behind my router will be able to register SIP. wonder if i could setup airtel voip as trunk for asterisk pbx
@@geekytwins i dont have exp in voip server.. just sharing thoughts. i'll try if i've time. this voip on airtel gave us a lot to play with :P i'm using opnsense on dell optiplex mini pc as a router
Hi sir, I have airtel xstream connection with Nokia 2424 with static Ip. I have bridged to my TP link C6 router. Everything is good now but issue is i cant use my existing landline service. But nokia router shows voice is on and voip light blinks on nokia router. But landline is not working. Is there any way i can use normal landline phone with it or by requesting airtel people Or in worst case can i use this Yealink T31p by connecting to my tp link router? Thanks in advance !
Hello brdr, normally bridge mode has nothing to do with the voice configuration. But, I'd request you to reach out to Airtel CC and ask them to push voice settings again to your ONT, just in case they fucked your voice config up while setting up the bridge mode.
Hi Brother, Thanks for replying 🙂 You are right , i had issue in the nokia landline port, its loose, hence it gets disconnected. But now new issue is in wired devices i am getting 50 mbps ( 40mbps plan ) but in wireless it is giving 30-35 Mbps in tp link c6 But the same c6 router in ap mode used give me 50 mbps similar to lan Is this a config issue or something else m missing. Thanks again for taking time to reply ! And i pray for your growth in all your endeavours.
Bsnl ftth connection and voip not purchased but im the mind cisco 7821. So how can we setup cisco voip with BSNL ftth any idea.. Device i can get its at near by shop.
Sir I have connected yealink T30P SIP IP Phone with Jio Air fiber and the account status is showing registering from last four days, what is the issue please reply.
You need proper VoIP settings in your T30P IP Phone to make it work. Otherwise, there's absolutely no chance of it working. Try Jio Join app, I hear it has started to work with Jio AirFiber.
Hi sir ...mere pas casio ka ip phone h .....and bsnl ka fiber broadband h....pls mere help kare....kese connect karna h phone.....mene apne agent se help liya tha....par usko nahi aata ...usne mana kar diya ...bola connect nahi hoga ue
Hi brother, i have purchased same Yealink ip phone you have. I have tried to plug in it with jio aifiber but There is no response. So my question is that is there any way to connect it with jio airfiber or not? I would be thankful of you
For that you have to watch our video: ua-cam.com/video/uGXqp7V8AuE/v-deo.html The setup inside the yealink T30P IP Phone should be same as the one in T31P.
Contact Jio CC and let them know that this issue is happening. They may be able to help you. Secondly, Jio also provides an analog telephone adapter, ask for that.
Your VoIP password depends upon the format of your VoIP username. If username is like yyyyyyyy@xx.ims.airtel.in where xx is your state code like wb, mp etc. then password would be Nokia@1, otherwise it'd be Huawei@1
Sir, recently I've purchased Grandstream HT801 Analog Telephone Adapter and after doing successful registration, I can receive calls without any issue but when I'm trying to make a call it says "The number you have dialed is invalid". Even I tried adding 0 at the beginning but it always says the same. I can't figure out the problem. Please help me. I can share the Web UI settings of the ATA with you.
I was also thinking to purchase HT 801. If you find any solution please share the details @navjot Singh
Hello bro, why did you buy an ATA, an IP Phone is a much better solution.
Please return it an get an IP Phone, if it's still in return period.
@@ShrayasiDas-kk6iu Please don't make this mistake, rather get an IP Phone. It's cheaper as well and will offer more functionality.
@@geekytwins I purchased it because I already have cordless landlines in my home and if I switch to IP Landphone then it will be a problem in terms of mobility and IP Cordless phones are bit too expensive in India. So, rather I prefer to buy an ATA ..... Though my problem was solved which I mentioned in my comment earlier.... The default dial plan was not in Indian Standard... So, I was supposed to change the dial plan and it works perfectly and thanks for your suggestion ❣️
@@DebankurMandal-y6z That makes sense and I'm glad your problem got resolved! Have fun with the unlimited calls, brdr! Thanks for the continued support!
my Sercomm AOT-4221SR is configured in bridge mode now.
i can replace it with XZ000-g3 v2 and setup tagged vlan 660 in router. hopefully any softphone or ATA behind my router will be able to register SIP. wonder if i could setup airtel voip as trunk for asterisk pbx
I feel that should be possible! Please try and share the findings.
What's your router BTW?
@@geekytwins i dont have exp in voip server.. just sharing thoughts. i'll try if i've time. this voip on airtel gave us a lot to play with :P i'm using opnsense on dell optiplex mini pc as a router
@@Rajesh-xc3ij It indeed gives us many opportunities to explore, sir! Also, cool setup!
Can you make a video on how to use IP phone in Jio Airfiber or ATA on air fiber. Because Jio AirFiber don't have any FXS port for landline connection
Hello brdr, Jio Join app is now working on Jio AirFiber, can you please try and check?
Kya Ham jio air fibre mein iP phone Chala sakte hain? Sir please please iska Upar ek video Hona chahie
The whole of India is waiting for this, when will the landline phone coming.
@@subratparida143 Will try to create one video on this too!
@@geekytwins Please the sooner the better everyone is waiting for it
Sir can i use this phone only with power cable ? Without any rj45 or rj11 cable?i have airtel fiber net
Nope, not possible unless you get a IP phone with built-in WiFi and unlock your Nokia ONT and do the necessary steps.
Hi sir,
I have airtel xstream connection with Nokia 2424 with static Ip. I have bridged to my TP link C6 router.
Everything is good now but issue is i cant use my existing landline service. But nokia router shows voice is on and voip light blinks on nokia router. But landline is not working.
Is there any way i can use normal landline phone with it or by requesting airtel people
Or in worst case can i use this Yealink T31p by connecting to my tp link router?
Thanks in advance !
Hello brdr, normally bridge mode has nothing to do with the voice configuration.
But, I'd request you to reach out to Airtel CC and ask them to push voice settings again to your ONT, just in case they fucked your voice config up while setting up the bridge mode.
But if your VoIP light is on, then I think there is some issue with your landline set.
Hi Brother,
Thanks for replying 🙂
You are right , i had issue in the nokia landline port, its loose, hence it gets disconnected.
But now new issue is in wired devices i am getting 50 mbps ( 40mbps plan ) but in wireless it is giving 30-35 Mbps in tp link c6
But the same c6 router in ap mode used give me 50 mbps similar to lan
Is this a config issue or something else m missing.
Thanks again for taking time to reply !
And i pray for your growth in all your endeavours.
Try checking the wireless settings in the TP-Link C6. Must be something wrong with that config.
And glad I could help and thanks for the best wishes!
Bsnl ftth connection and voip not purchased but im the mind cisco 7821.
So how can we setup cisco voip with BSNL ftth any idea..
Device i can get its at near by shop.
It should be as simple as copying the VoIP settings in your ONT to your Cisco 7821.
Hi bro please tell me your mobile number
Mera pass bhi bsnl ka ftth hai ip phone kaise configure karna
Ping me on discord, we'll see
@@geekytwins discord link
once voip soft phone setup on android, if we open SIP port in firewall, can we connect and make calls while out of home?
I have no clue about it, brdr.
Please test and let me know if it works for you!
@@geekytwins sure bro. i will try it and post
Bro, BSNL Wings Service will work on this VOIP Phone??
Yes, it would! BSNL Wings has such a shitty voice quality though.
I have grandstream gxp1620 how to connect bsnl ftth
Very simple, copy all the settings of the BSNL ONT to the IP Phone after creating the static route and enabling internet in the Voice WAN profile.
Sir Jio Airfiber Se Connect Ho Skta H Kya?
Brother, that's not possible yet. Once someone figures out how to setup VoIP on JioFiber, we'll make a video on that too! Till then, keep supporting!
@geekytwins please make video on that too soon we need
My yealink is not connecting with jio fiber
Bro make a video on Android Zoiper with xtream
That video will be out very soon, let's connect on discord to solve your issue regarding VoIP Profile on Sercomm ONT.
@@geekytwins Discord server id?
Sir can this phone be connected to jio airfibre router.
Brother, that's not possible yet. Once someone figures out how to setup VoIP on JioFiber, we'll make a video on that too! Till then, keep supporting!
Sir normal landline vali bhi video bano.
Normal landline me toh bas you have to connect the landline to the ONT, that's it brdr.
Are you talking about something specific?
Can we use in jio airfiber
Nope, that setup is still not possible. Once we find the solution, we'll make a video on that too!
Sir please tell how to configure with jio airfiber
Brother, that's not possible yet. Once someone figures out how to setup VoIP on JioFiber, we'll make a video on that too! Till then, keep supporting!
Jio join se preshan ho kya bhai😂
Sir I have connected yealink T30P SIP IP Phone with Jio Air fiber and the account status is showing registering from last four days, what is the issue please reply.
You need proper VoIP settings in your T30P IP Phone to make it work. Otherwise, there's absolutely no chance of it working. Try Jio Join app, I hear it has started to work with Jio AirFiber.
Jio connection
Hi sir ...mere pas casio ka ip phone h .....and bsnl ka fiber broadband h....pls mere help kare....kese connect karna h phone.....mene apne agent se help liya tha....par usko nahi aata ...usne mana kar diya ...bola connect nahi hoga ue
Ping me on discord, we can try.
Will any voip phone work with airtel?
Yes, brdr, any voip phone will work with airtel!
Hi brother, i have purchased same Yealink ip phone you have. I have tried to plug in it with jio aifiber but There is no response. So my question is that is there any way to connect it with jio airfiber or not?
I would be thankful of you
Nope, no way to connect this phone to Jio Airfiber.
Can I connect this phone to jio airfiber router? if so how to configure?
No, you cannot. However, you can reach out to Jio and ask for an ATA to connect an RJ11 landline phone.
Sir can IP phone be used in Jio Air Fiber??
Nope, not possible till someone extracts the settings out of it.
Ook
@@geekytwinssir PLs Jio air fibre ke liye ip phone ki video banao
@@TheTiloi Not possible brdr
Sir can you please tell me how to make sip server host name of yealink T30P IP Phone
For that you have to watch our video: ua-cam.com/video/uGXqp7V8AuE/v-deo.html
The setup inside the yealink T30P IP Phone should be same as the one in T31P.
Can i use my T31G with Bsnl FTTH connection
You definitely can, sir!
@@geekytwinsfrom where i can get the user name other details for BSNL
@@sharafchalayil sir, these details you can find in your router's WebGUI, under Voice Settings.
Brother please add video for jio air fiber SIP t31p 🙏🙏🙏
Not possible to use this phone with Jio AirFiber or Jio Fiber. Use JioJoin application instead.
@@geekytwins Jiojoin application is not getting configured with Jio Airfiber. It is only working with Jio Fiber. Any solutions for this.
Contact Jio CC and let them know that this issue is happening. They may be able to help you. Secondly, Jio also provides an analog telephone adapter, ask for that.
Bsnl ftth ke sath kaise ip phone configure karen
Very simple, basically follow the same steps.
hi, great video. any idea what my voip password could be? Airtel Device Sercomm AOT-4221SR, location is Hyderabad. many thanks
Your VoIP password depends upon the format of your VoIP username. If username is like yyyyyyyy@xx.ims.airtel.in where xx is your state code like wb, mp etc. then password would be Nokia@1, otherwise it'd be Huawei@1
@@geekytwins thanks bro
Hello how to contact you
Please join my discord server: discord.gg/knH439W2