I fixed a car radiator with milliput in the 1990's I was a poor student with a shed of a car , the car had a metal guard covering the radiator and it broke off and slid between the engine and radiator slicing the radiator with a 5 inch slice. water was pouring out so no way could I drive it I took it to the garage and they said it needs a new radiator and the price for the replacement was a lot over £200 in 1990's I was skint and had no idea what to do and I remember that milliput was good with water so I checked the packet and it appears to be ok(and I had no other choice) so I got the entire packet and made a massive lump of it and slapped it on my car radiator spreading it out and covering the hole ran the car for about 10-15 mins to make sure it was warm and also it was not leaking then re-squashed it back down and then left it overnight the stuff set like a stone for the next few months id check it everyday , but over the months and years it just held position had that car for another 5 years and that milliput fix was still working even when I took my car to the scrap yard on its final day
I´ve had the materials (Oyumaru and milliput) sitting in a drawer for over a decade, never used them. Even though I´m starting to 3dprint now, with acceptable results, your video made me decide to try cloning Adeptus Titanicus parts. Thank you!
@@photonfartsqueeze6694 Company and writers|designers are two separate things. I like some of gw things (fantasy battles) but hate others so why not? They have more money than ever and i really would better keep my kidneys instead of selling them for some overpriced miniatures
@@ShowerOnceYearly I have some 9th edition marines, but I don’t play 40k since it’s a mess. I do play AoS, but by the end of third that game became a mess as well. So to call me a shill is a little strange. I suggest all of you get out and play more games. There is better stuff out there.
Nice video my man really useful little tips like the mould form and index points, Thanks for making a useful and easy to follow video, Liked and subscribed and will recommend, Cheers Brother from the UK
I believe the top part of the mould has better detail because you've squished the blue stuff in all around the master. Have you tried removing the bottom part of the mould and redoing it? That way you could probably get the same level of detail on both halves. Thanks for the video 👍🏼
also putting the mold half to set in a freezer to harden up even more, so less likely to warp slightly after taking the piece you molded out for casting.
Great video! I might have missed it, but is there a reason you take the bits out of the mold after 4 hours instead of letting them cure in the mold over night? Is it harder to get them out when they are fully cured?
Exelent video, What i do is make a Milliput miniture/modal ect, make a slilicone mould of it in high temp resistent silicone than make a load of metal minitures that are stronger and nice to play table top/ paint ect.
@@SomethingInMyBasement BBDINO Silicone Mould Making Kit, Liquid Silicone for Mould Making 30A, I dont know how many it makes as im still making modals and the mould still have nbot broken, I get faliures but i just pore it again and again until they come out perfect maybe 2/8
well i knowe whas 2 years a go and just one vid and what hapend to poster ? that he stoped ? but as ALL other re cast vids this a ok one and why not make moldes that did have re do al the time ? thare is an A B mole makeing stuff that do pirment re cast molds i see in other vids but proly never know hope hes ok and nuthing bad had hapend
if you can build some sort of hard container with wood or some other hard material, you can probably get better quality from these under pressure from a bench vice or something.
I fixed a car radiator with milliput
in the 1990's I was a poor student with a shed of a car , the car had a metal guard covering the radiator and it broke off and slid between the engine and radiator slicing the radiator with a 5 inch slice. water was pouring out so no way could I drive it
I took it to the garage and they said it needs a new radiator and the price for the replacement was a lot over £200 in 1990's
I was skint and had no idea what to do and I remember that milliput was good with water
so I checked the packet and it appears to be ok(and I had no other choice) so I got the entire packet and made a massive lump of it and slapped it on my car radiator spreading it out and covering the hole
ran the car for about 10-15 mins to make sure it was warm and also it was not leaking then re-squashed it back down and then left it overnight the stuff set like a stone
for the next few months id check it everyday , but over the months and years it just held position
had that car for another 5 years and that milliput fix was still working even when I took my car to the scrap yard on its final day
I´ve had the materials (Oyumaru and milliput) sitting in a drawer for over a decade, never used them. Even though I´m starting to 3dprint now, with acceptable results, your video made me decide to try cloning Adeptus Titanicus parts. Thank you!
Less money in GWs pocket. Rock on
If you’re worried about supporting a company you don’t agree with, why play their games at all?
@@photonfartsqueeze6694 Company and writers|designers are two separate things. I like some of gw things (fantasy battles) but hate others so why not? They have more money than ever and i really would better keep my kidneys instead of selling them for some overpriced miniatures
@@photonfartsqueeze6694does it take alot of energy to be a shill for a company everyone hates?
@@Horsemanray No, but by playing the game you are in fact supporting their company.
@@ShowerOnceYearly I have some 9th edition marines, but I don’t play 40k since it’s a mess. I do play AoS, but by the end of third that game became a mess as well. So to call me a shill is a little strange. I suggest all of you get out and play more games. There is better stuff out there.
Keep this up !!! you are an awesome talent
Really cool video, nice clear instructions. Your finished product is really amazing, looks store bought. Looking forward to more videos :)
Nice video my man really useful little tips like the mould form and index points, Thanks for making a useful and easy to follow video, Liked and subscribed and will recommend, Cheers Brother from the UK
Really awesome video, I see a UA-cam master being born . I love the vibe
I believe the top part of the mould has better detail because you've squished the blue stuff in all around the master.
Have you tried removing the bottom part of the mould and redoing it? That way you could probably get the same level of detail on both halves.
Thanks for the video 👍🏼
also putting the mold half to set in a freezer to harden up even more, so less likely to warp slightly after taking the piece you molded out for casting.
Can you also make figures in a piece using this method?
thin your paints , brother
Eh, doesn’t look terrible, at least they’re all painted.
No
Great video!
I might have missed it, but is there a reason you take the bits out of the mold after 4 hours instead of letting them cure in the mold over night? Is it harder to get them out when they are fully cured?
"what does he mean?" XDDDDDDDDDDDDDD
for anyone who has made a full recast out of milliput, how well does it hold up over time?
That thicc paint tho
Exelent video, What i do is make a Milliput miniture/modal ect, make a slilicone mould of it in high temp resistent silicone than make a load of metal minitures that are stronger and nice to play table top/ paint ect.
That sounds cool! What kind of silicon do you use to cast metal miniatures? (and how many casts do they last for?)
@@SomethingInMyBasement BBDINO Silicone Mould Making Kit, Liquid Silicone for Mould Making 30A, I dont know how many it makes as im still making modals and the mould still have nbot broken, I get faliures but i just pore it again and again until they come out perfect maybe 2/8
@@lutrueson9000 thanks! I’ll look into that 🙂
well i knowe whas 2 years a go and just one vid and what hapend to poster ? that he stoped ? but as ALL other re cast vids this a ok one and why not make moldes that did have re do al the time ? thare is an A B mole makeing stuff that do pirment re cast molds i see in other vids but proly never know hope hes ok and nuthing bad had hapend
Just stumbled upon this video. Hope he's ok too.
Great way to save money while still being able to enjoy painting and play!
if you can build some sort of hard container with wood or some other hard material, you can probably get better quality from these under pressure from a bench vice or something.