Second install BMW 3 series F30 NBT android 11 (with fiber optic cable)
Вставка
- Опубліковано 10 тра 2022
- Second time to install BMW 3 series F30, this time using PEMP android 11 for installation. At the same time joined the OEM optical fiber transfer steps.
bmw f30 android 11 buy link:
www.amazon.com/dp/B09L4TQ8G8?...
If you have any good suggestions, I hope you will let us know.
Service@pempcar.com
I see that you didn't run the aux cable from head unit to "Aux in" plug, is that not necessary?. I am thinking of buying one, i have 2014 bmw 328i xdrive F30 NBT.
90% of F30's do not need to be connected to the AUX input jack in the armrest box. Unless you properly adapted the fiber optic to android harness still not getting sound.
I dont have the 2 green fiber optic cables from the harness? What do I did? I have a 2013 f3 320i
If your car doesn't have 2 green fiber optic cables. You just ignore it. PEMP Android will work fine.
Hello, I am getting sound but it sounds very poor in comparison to the original setup before.
The strange thing is: i do not have any green optic fiber caples that i had to unplug from the original power harness and plug to the android harness. So that piece simply doesn‘t exist in my car. And i don‘t have the problem of not having any sound. I just have very poor sound over the android system and it does not reach maximum volume, so quality is worse and more quiet than the original thing. When I switch to the original bmw software (while android is still plugged in) Radio and my music over the original setup sounds way better and how I‘m used to it. So it seems like a software issue. Can you please help?
Thanks for the info. Yes, the Android sound is fed from the AUX channel of the OEM radio, so it does sound a bit worse than the OEM sound quality. We are trying to fix this by using the OEM Bluetooth or USB interface. Guess it will take a few more months to get it done.
Hello! I am thinking about buying one but my OEM headunit is not working! Will it work even if the original headunit is not working?
No, if your original head unit isn't working, you won't be able to get the Android sound, and the OEM menus won't show up.
I suggest you restore the original headunit to normal before purchasing it later.
My car doesn’t have fiber optic cables (2016 f30) am I still able to install this
Yes, it fits your car.
If you don't have the green fiber optic harness on your OEM iso harness, you don't need to patch it.
I dont have a usb slot on my 2012 F30 to thread the USB. However, my glovebox has a usb drive already on the right, a usb in my center console and an aux in my center console. Can i just use those?
Install the PEMP Android screen without interfering with the original USB work. If you can't get sound, you need to connect the Android AUDIO OUT and AUX IN together to get sound.
@@pempcar thanks. I'll give this a shot today. I was able to boot it up and I ran into a few issues with the original OEM screens being cut off on the resolution in the texts. Slightly shaking. Also, the cameras seem to work in the OEM view but I think I bought the package that has extra cameras like the top down view the front side cameras and those don't seem to work. I'm going to check your FAQ video that came with the kit and see if any of that documentation helps me solve for these other issues. Overall it felt very clean. My wife joked that I'm making my own Tesla.
@@jeffcraig8475 1. You can set the oem screen resolution.
ua-cam.com/video/jOK8bPDxtzo/v-deo.html
2. If you have the OEM camera, you just need to buy a front view camera to get front video. But PEMP only supports AHD front view, so I suggest you to buy PEMP branded front camera which works better with PEMP android screen.
www.amazon.com/dp/B09TLCVYRB?ref=myi_title_dp
I got everything connected back together as shown in the video, but when I put it in reverse it says "no signal" instead of displaying my factory rear view camera. Any tips?
Pls set the Camera to OEM option:
Settiings>system>camera selection>OEM camera
I just installed yesterday. And I am not getting audio. I tried the AUX cord and nothing. The optical fiber cord is connected good. It played music one time after I turned the car off it stopped again
Please select the OEM's AUX menu before each entry into the Android.
If it still can't be solved, please contact our after-sales service team at service@pempcar.com
Is it possible to use an external mic ? If yes, where should i connect it?
Sorry, The external microphone is connected in parallel with the Android built-in microphone, so it does not add to the call quality. you can try.
ua-cam.com/video/yjyXGv9Qyh0/v-deo.html
@@pempcar thank you for your quick response 👍
Why is the Bluetooth music soft when playing music via Bluetooth and the volume turned up on max
You can try to increase the volume of the media audio to about 32 in the system settings.
@@pempcar❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
I can’t seem to be able to switch to oem interface when I press the button to the screen just goes dark
Please select another OEM Display resolution in the factory settings until the display is normal.
Settings>factory setting>pass 070305>Car Display
@@pempcar hi i havent got a factory setting option on my screen
@@UTubenews. Recovery is under the system info menu.
@@pempcarthe oem menu doesn't show after adjusting resolution..is there a nu Uber I can call
@@Stephanie-zk9ic Sorry, I'm in China and can't talk to you on the phone,
If you still have a problem, please contact our after-sales service team to solve it at service@pempcar.com
I did everything right, but I have no sound
1. please check that the optical cable is correctly transferred to the top of the android harness.
2. you can try connecting the audio cable to the armrest box aux input.
If you still can't fix it, please email our after sales team at service@pempcar.com Remember to state your purchase order number in the email.
Great but you dont show it working?
Dear Jose:
Yes, after installation. No working test was done. You can refer to the video below to use it.thanks
ua-cam.com/video/IlIB2aWuZlM/v-deo.html
Is it necesary to disconnect the battery?
Yes, it would be more reliable .
@@pempcar thanks sir, installation was perfect. I have an issue now, everytime I power off the car the system is shutdown, so when i start the car it has to boot completely, taking like 30 seconds. Is there any way to avoid this? Cant find any option in Factory settings.
@@whoisthezator Yes, Android boot time is taking 30-40 seconds. It's unavoidable. But you can set it to show the OEM screen every time you boot. It might help you.
Of course another way is to buy a Linux product which takes only 5 seconds to boot. You can avoid this problem, but the Linux product is simpler, it only has CarPlay Android auto function.
www.amazon.com/dp/B0D5J3PVPF
@@pempcar that would be awesome, how can I set that?
@@whoisthezator
Settings>factory settings>pass 070305>function>remember last model>select the to oem system
What’s the password
Factory settings pass word is 070305