Ok so can I figure out field borders on my own? Like say I merge 2 together will course play pick that up or do I have to manually enter the new borders in?
What mod are you using that displays the vehicle information in the upper left? I have been using Vehicle Inspector, but the format doesn't match what is displayed in the video.
RD, thanks for this tut, great timing, as I am using CC for the first time ever. Played FS from beginning of time and just never took the time to figure it out. Kinda like it.
2020-12-17 21:35 :59 [info lp171200] 380 CVX (#2): No path found to 9240 (#1) in 0 ms, pathfinder failed at least twice, trying a path through crop and relaxing pathfinder field constraint... what to do to fix this
@@radozeman I have steam FS19 version 1.7.1.0 and courseplay version 6.03.00013. Im thinking about finding a older version that will just use the combi unload mode and set a timer and see if that works like you have done in this video.
@@radozeman Im in second mode so the graincart can empty the combine. How long is needed? Do you mean from the (P)I to the stop point or from start to the stop point?
I used this video guide to test this myself, but due to changes in CoursePlay from the version he used to the one I used I had to change a few things . What I found was: 1) I use the 6.02.00034 version (June 30, 2020) and here the wait timer does NOT work. What works however is the unload command (waypoint) from the Auger to the Trailer. Just make sure the pipe is extended the whole round trip as the special auger mode isn't working in this version of CoursePlay either :( 2) Use the smaller Augers and those Tractors that are more maneuverable as both CoursePlay and the AI turn maneuvers (in Advanced settings) likes to use very narrow turns which result in crashes all the time. This happened to me all the time when the Auger was approaching from the front and tried to do a 180 behind the Combine, ESPECIALLY around field corners! AI turn maneuvers seem to work a little better tho! 3) Enable Temporary waypoints in Advanced options to see what your drivers are up to! 4) BE AWARE sometimes the auger won't unload to the trailer. It seems to be certain Auger/Trailer combinations on certain parts of the map? Still not sure about this but I recommend you test the equipment manually if you run into this issue before you setup the courses.
It's not a "Little derpy" This entire program is a total POS!!! This should have never been released yet. It's still buggy as hell, sometimes things work but most of the time it just has a mind of it's own. Great theory in concept but it still needs MAJOR work. This is 4 months after you posted this video and little to nothing has been done to actually fix the issues. Runaways, options work fine one second then they go brain dead lol. There's a couple maps that i've tried it on that actually just lock up and crash when you go to generate fields lol....It seems to be REAL particular about what mods you have running with it on various maps. I have messed with this for a couple weeks now and it will drive you crazy if you let it lol.
What a horrible how-to video. A good video would choose a better field and find equipment that actually works the right way, both ahead of time instead of finding out during the recording.
I liked it, becouse the realism of it. I use CC as well and if you do so you found out that CC let s you down some times, even when you do all the settings whright ...
I love this video for *2* reasons. 1, it helped me set up a grain cart on courseplay. 2, it was released on my birthday!
I've never been able to get this feature to work correctly.... now I know why lol
Thanks for these tutorials, keep 'em coming
Technically it still doesn’t work correctly with the right mode, but oh well.
I have another question what is the website called that you get your mods from I can’t find a good website
Start with the one right in the game! Then most of the rest I get from Facebook.
@@radozeman ok thanks
Ok so can I figure out field borders on my own? Like say I merge 2 together will course play pick that up or do I have to manually enter the new borders in?
What mod are you using that displays the vehicle information in the upper left? I have been using Vehicle Inspector, but the format doesn't match what is displayed in the video.
Glance mod
RD, thanks for this tut, great timing, as I am using CC for the first time ever. Played FS from beginning of time and just never took the time to figure it out. Kinda like it.
Once you get use to it, you won’t know what to do without it!
What happens if your combine won’t unfold the auger when it is full plz respond
Try folding/unfolding pipe in/out I have had that before usually a combination of such will make it fold out. Otherwise need to reset it.
@@radozeman ok thanks
2020-12-17 21:35 :59 [info lp171200] 380 CVX (#2): No path found to 9240 (#1) in 0 ms, pathfinder failed at least twice, trying a path through crop and relaxing pathfinder field constraint...
what to do to fix this
It should try a third time and just drive through the crop.
@@radozeman I have steam FS19 version 1.7.1.0 and courseplay version 6.03.00013. Im thinking about finding a older version that will just use the combi unload mode and set a timer and see if that works like you have done in this video.
Please help for me the mod is not working
Thanks for the great videos i have never gotten this one to work either. Could u do a silage chopping doing corn and blowing into a wagon
Silage? Ok I’ll see what I can do!
I can’t get courseplay to work on my grain cart I have it on pc
What’s not working about it?
how would you do a big field like field 17 on wild west map
Can you set this up with multiple trailers / trucks
You can yes, just put more on the same course
How about doing a GPS / Guided steering vid, showing what it’s purpose might be good for. Thanks
Cant get the bloody paus timer to work, he either stops to late or dosen't stop at all or stops in definetly... 😵
Are you in the right mode? Have a long enough lead up to the stop point?
@@radozeman Im in second mode so the graincart can empty the combine. How long is needed? Do you mean from the (P)I to the stop point or from start to the stop point?
njakka I'm having the same issue. Did you find a fix?
Mine just repeats the course I can’t get it to work
It doesnt work on newer versions
It does, you need to have the combine running courseplay as well.
Wow So 😎 cool!
What map is this?
autumn oaks
Autumn Oaks, he says at 00:28
@@jjdirtydan5375 thx
Thx
from what i have gathered, crop destruction is only for the player. i have ye to see AI destroy crops when turning in fields and driving over crops
I think they changed that, it use to destroy crops as well
Need this
my equipment always wants runaway
Thought it was me, guess not. Truck to farm and works great. The rest sucks!
I used this video guide to test this myself, but due to changes in CoursePlay from the version he used to the one I used I had to change a few things . What I found was:
1) I use the 6.02.00034 version (June 30, 2020) and here the wait timer does NOT work. What works however is the unload command (waypoint) from the Auger to the Trailer. Just make sure the pipe is extended the whole round trip as the special auger mode isn't working in this version of CoursePlay either :(
2) Use the smaller Augers and those Tractors that are more maneuverable as both CoursePlay and the AI turn maneuvers (in Advanced settings) likes to use very narrow turns which result in crashes all the time. This happened to me all the time when the Auger was approaching from the front and tried to do a 180 behind the Combine, ESPECIALLY around field corners! AI turn maneuvers seem to work a little better tho!
3) Enable Temporary waypoints in Advanced options to see what your drivers are up to!
4) BE AWARE sometimes the auger won't unload to the trailer. It seems to be certain Auger/Trailer combinations on certain parts of the map? Still not sure about this but I recommend you test the equipment manually if you run into this issue before you setup the courses.
It's not a "Little derpy" This entire program is a total POS!!! This should have never been released yet. It's still buggy as hell, sometimes things work but most of the time it just has a mind of it's own. Great theory in concept but it still needs MAJOR work. This is 4 months after you posted this video and little to nothing has been done to actually fix the issues. Runaways, options work fine one second then they go brain dead lol. There's a couple maps that i've tried it on that actually just lock up and crash when you go to generate fields lol....It seems to be REAL particular about what mods you have running with it on various maps. I have messed with this for a couple weeks now and it will drive you crazy if you let it lol.
What a horrible how-to video. A good video would choose a better field and find equipment that actually works the right way, both ahead of time instead of finding out during the recording.
I liked it, becouse the realism of it. I use CC as well and if you do so you found out that CC let s you down some times, even when you do all the settings whright ...
@@willemooms9591 CC? You mean CP as in CoursePlay?
@@ArmpitStudios Yes i do, CP of course...my mistake.
What map is this?
Autumn Oaks I believe