"Not that i crash or anything, im the safest rider " *Skips to clip crashing* lmaoooooooooo love this channel. Cant wait to get my bike back up. Riding with you guys at yalls meet, is wild and fun.
I got these on my R1, first one didn’t line up on the clutch side they sent me a new one within 2 days. Very helpful and quick response on the customer service
I love seeing whats in the background in your garage. first there is some crown royal bags, then I notice there is a motorcycle photo in the miror of the big toy car.
JAKE should start build series. his working on bike videos are awesome. and He is a very mechanical person, who knows a lot about bikes , more than other big motovloggers .
Watching the video and it cuts to Jake in the full TMNT outfit, sunglasses and hat and I'm not even phased. It's totally normal. That's just Jake being Jake, lol.
Can’t say enough good things about t-Rex slider kits!!! Got em on my drz and I slid that bitch across 20 feet of pavement and there was zero damage other than the sliders that showed only a little bit of scrapes. So awesome
co8539 even without the trex gear the DRZ is just a beast. I had case savers and a skid plate from thumper talk on mine when I crashed it. Did an endo at 55mph on asphalt and shattered my collarbone into 5 pieces. Picked up my DRZ 400 and it had some scratches and a broken turn signal bulb. It started up and drove away just fine. Fuckin amazing bike
I have the T-Rex pucks on my 2016 suzuki gsxs 750 and I really like them never really thought about putting the engine dress kit on it looks really nice with it on there might have to pick those up to
If I'm right, that's a non-serrated Buck knife, you have there, which is just like mine. It's the sharpest blade that I've ever had on a knife, hands down. Excellent taste brother!
MY fz droped 3 times and the floor havent reach the swingarm, I believe if you have a drop with this stand support your swingarm will scratch, so the sliders that you put on the wheel will be much more funtional.
Mostly when installing Parts on a bike longer or shorter screws stick out of the part the same amount. Even without a diagram you can figure out which screws go where. Nice bike!
I have these frame sliders and axle sliders. The frame sliders where the biggest pain in the ass to install ever. The dam engine dropped on the onside and it wasn't just a little bit off but more than half of a bolt off so with jack underneath was still way off. I had to use my breaker bar to pull the frame into place in order to make holes line up. ...You made this look too easy Jake.
Jake TheGardenSnake No I did one at a time. It was on the first one. It wasn't just from engine drop the frame also warped up it was like 40F out when I did it so the shrinking of the metal is probably to blame.
It’s winter here so no test rides are possible. Also if you get caught 50 kms over your bike gets impounded and you lose your license. Crazy strict in Canada
The one's that you have put on the engine should be tightened to 12 Nm of torque. It is pretty light, I can already tell you have overtightened them. Specific torque right there is one of the most important compared to any other place, as it has a gasket on both sides which prevents oil leakage. It might be just fine for a couple of months/years, but that might be the case you will get oil leakage in which case you will have to change both side gaskets. Just a comment to make other people aware, Ride safe!
My friend! Is necessary open hole in the wheel axle for put this sliders? I'm from Brazil and my bike hasn't this hole in the axle... If you can help me.. Thanks
The T-rex sliders look really nice but looks like you added 15# to the bike are they aluminum plastic or what ? big steel bolts .. @Jake The Garden Snake
I have a fz07 the same one as jake, imo I’d go with the fz only bc you’ll get way more out of it. The 600 is gonna come in alittle faster than the fz07 despite being 690cc but The fz07 has more than enough power to get you in and out of trouble !!! It’s just a matter of personal preference of what kinda ride you’re looking to get. Fz07 is fun with low speeds and high speed 😊😊 hope this helps
Hey Jake u wanted to give us feedback of the led bulb u put in ... I’m thinking about putting them in my bike too but I have lenses behind bulb and I’m scared that they will melt the plastic covers of my light .
Jake. please answer. So I'm a welder fabricator. I am fully capable of drilling and taking and tapping a hole for traditional spools. Would this small hole in the swing arms really cause any dangerous weakening effect on them??
Hey Jake if you see this, I recently purchased my 2016 FZ07 and want to get a full kit similar to the one you have in the description but none of the items you have listed are still available. Do you have one to recommend?
So I have a 2018 MT-07 and I have been looking for two point frame sliders, everything seems out of stock/only for the upto 2016 fz... Any suggestions? I really wanna use this bike for moto Gymkhana and some light stunning so I need it more well protected and a stunt cage would ruin it as a daily driver... Thanks in advance (fyi I am in Canada...)
Are there jacks like car lifts that you can use on an FZ07 that keep it stable and able to work on suspension? I feel that the rear spring is too soft for my weight and I don’t think I can work on the suspension with normal paddock stands.
Hey man I just got the exact same case covers and sliders, fantastic feel and quality but I'm having issues with the case cover mainly with the left side one, i removed the three bolts the bottem two leaked oil as soon as they came out and now that the cover is on it leaks a bit on rides, they are as tight as i can safely torque before stripping the threads not sure what to do pls help
Stuff looks super nice.... but as an engineer and machinist... and just human. I can’t stand they didn’t provide the kits with blackend or coated bolts. They stand out so much now with only being galvanized 🙃
Can't wait to see you test them all :) Are you going to change the chain and possibly the sprockets? even if you keep them stock size but change the colour of the rear sprocket and chain.
“Let’s go put some protection on this motorcycle” I was expecting Jake to put a condom on the Handel bar and roll the outro
this is probably the most important mod you can do on your motorcycle. great job!
I just bought a 2018 MT07 and I’m glad you made a how to video of this safety parts
I bought an 18 as well and love it! I bought the T-Rex case savers and frame sliders as well. They look really good
Nice impression of Chase at the start lol
"Not that i crash or anything, im the safest rider "
*Skips to clip crashing*
lmaoooooooooo love this channel. Cant wait to get my bike back up. Riding with you guys at yalls meet, is wild and fun.
New viewers are going to be like "wtf is he wearing?"
Gregory Mallory haha yeah
im very new to this channel and yes... why ninja turtles?
That’s exactly what I was thinking 🤣
I got these on my R1, first one didn’t line up on the clutch side they sent me a new one within 2 days. Very helpful and quick response on the customer service
I love seeing whats in the background in your garage. first there is some crown royal bags, then I notice there is a motorcycle photo in the miror of the big toy car.
I had a pair of no cut frame sliders frame sliders from t-Rex on my cbr 600. They looked real nice
JAKE should start build series. his working on bike videos are awesome. and He is a very mechanical person, who knows a lot about bikes , more than other big motovloggers .
Miss that intro.😀
Awesome! Now CRASH TEST IT!!!!
Trying not to
I had T-Rex sliders on my GSXR. I like that I didn't have to modify the fairings. I liked them a lot.
Last time I was early...
Jake rode the WR in SUMO trim
T-Rex stuff is freaking awesome and Tom is a great dude as well!
Watching the video and it cuts to Jake in the full TMNT outfit, sunglasses and hat and I'm not even phased. It's totally normal. That's just Jake being Jake, lol.
Can’t say enough good things about t-Rex slider kits!!! Got em on my drz and I slid that bitch across 20 feet of pavement and there was zero damage other than the sliders that showed only a little bit of scrapes. So awesome
co8539 even without the trex gear the DRZ is just a beast. I had case savers and a skid plate from thumper talk on mine when I crashed it. Did an endo at 55mph on asphalt and shattered my collarbone into 5 pieces. Picked up my DRZ 400 and it had some scratches and a broken turn signal bulb. It started up and drove away just fine. Fuckin amazing bike
Im planning on getting a FZ07 for my first bike. Going to purchase all things you have on your bike too. Got keep her protected riiite
Am I going to have to edit this one too.. Hmmm
Please spicy!
oh yeah lol, I forgot about those
When are you two doing another dual vlog? ;)
I have the T-Rex pucks on my 2016 suzuki gsxs 750 and I really like them never really thought about putting the engine dress kit on it looks really nice with it on there might have to pick those up to
The "lovely round rubber piece" on a jack is usually just an ice hockey puck. No joke, they're perfect for it.
If I'm right, that's a non-serrated Buck knife, you have there, which is just like mine. It's the sharpest blade that I've ever had on a knife, hands down. Excellent taste brother!
2:36 The material used for the engine case covers: UHMW-PE (ultra high molecular weight polyethylene)
Thanks for the tips Jake your jack advice helped me easily install my z125 t rex sliders
MY fz droped 3 times and the floor havent reach the swingarm, I believe if you have a drop with this stand support your swingarm will scratch, so the sliders that you put on the wheel will be much more funtional.
Long awaited series! Yeah!
Nice build, got the same wind deflector for mine, gonna hopefully work on my FZ build this winter
Mostly when installing Parts on a bike longer or shorter screws stick out of the part the same amount. Even without a diagram you can figure out which screws go where. Nice bike!
I weigh 240 lbs. what do you think. Am I too big for this bike. It would be my first full time bike. I’ve borrow R6 and Harley’s for the day before.
Send those parts to us and we will test how they work when you crash xD
Hahaha for sure
I have these frame sliders and axle sliders. The frame sliders where the biggest pain in the ass to install ever. The dam engine dropped on the onside and it wasn't just a little bit off but more than half of a bolt off so with jack underneath was still way off. I had to use my breaker bar to pull the frame into place in order to make holes line up. ...You made this look too easy Jake.
You didnt take both sides out at the same time did you?...
Jake TheGardenSnake No I did one at a time. It was on the first one. It wasn't just from engine drop the frame also warped up it was like 40F out when I did it so the shrinking of the metal is probably to blame.
It’s winter here so no test rides are possible. Also if you get caught 50 kms over your bike gets impounded and you lose your license. Crazy strict in Canada
The one's that you have put on the engine should be tightened to 12 Nm of torque. It is pretty light, I can already tell you have overtightened them. Specific torque right there is one of the most important compared to any other place, as it has a gasket on both sides which prevents oil leakage. It might be just fine for a couple of months/years, but that might be the case you will get oil leakage in which case you will have to change both side gaskets.
Just a comment to make other people aware,
Ride safe!
Love these. thinking about the case sliders next. Thanks for the tips
I had to use a 2x4 and floor jack to lift the motor up just a hair to hand thread the engine mount bolt... and it was the left side on mine as well.
My friend! Is necessary open hole in the wheel axle for put this sliders? I'm from Brazil and my bike hasn't this hole in the axle... If you can help me.. Thanks
+Jake TheGardenSnake
What tools did you use to install all the parts? Just bought a motorcycle and I'm looking to learn.
I love your German torque wrench description haha
The T-rex sliders look really nice but looks like you added 15# to the bike are they aluminum plastic or what ? big steel bolts .. @Jake The Garden Snake
Yo, I'm in Dallas as well.. I'm currently pushing a Hyosung GD250R.. Trying to decide between a CBR 600RR or the MT07/FZ07 🤔....
I have a fz07 the same one as jake, imo I’d go with the fz only bc you’ll get way more out of it. The 600 is gonna come in alittle faster than the fz07 despite being 690cc but The fz07 has more than enough power to get you in and out of trouble !!! It’s just a matter of personal preference of what kinda ride you’re looking to get. Fz07 is fun with low speeds and high speed 😊😊 hope this helps
@@alexkhan7027 This helps a lot! Thx!
Looks tight. Id remove those Fork reflectors
Clones2011 may need them in his state to be road legal
Have you droped the bike yet? Hows the sliders holding up
Hey Jake u wanted to give us feedback of the led bulb u put in ... I’m thinking about putting them in my bike too but I have lenses behind bulb and I’m scared that they will melt the plastic covers of my light .
Where can i find those frame sliders? On Amazon are no longer available
Jake. please answer. So I'm a welder fabricator. I am fully capable of drilling and taking and tapping a hole for traditional spools. Would this small hole in the swing arms really cause any dangerous weakening effect on them??
Doubtful, but I'd say weld a tab one the underneath side of the swingarm and tap into that
You killed the OCD in me with the sticker placement at the end 🙈🤣
Does your right side case cover contact the case?Mine does and it bugs me.Gonna have to modify it a bit.
Hey Jake if you see this, I recently purchased my 2016 FZ07 and want to get a full kit similar to the one you have in the description but none of the items you have listed are still available. Do you have one to recommend?
11:35 On my previous bike, a CB500F the holes immediately misaligned when I took the bolt out. I wish I had known this before.
Nice to install all that stuff if you'r planning to crash, how many pounds did you add to the bike?
Why don't you anti-seize the bolts you don't locktight? Or the shafts that goes threw the axles?
Yo Jake! I have the same MT and want to get the whole pack but it’s not available on Amazon anymore, know if I can still get it all somehow!?
So I have a 2018 MT-07 and I have been looking for two point frame sliders, everything seems out of stock/only for the upto 2016 fz... Any suggestions? I really wanna use this bike for moto Gymkhana and some light stunning so I need it more well protected and a stunt cage would ruin it as a daily driver... Thanks in advance (fyi I am in Canada...)
Super good product. Could you please send me the website where I can buy this product?
I love the intro. Keep up the good videos
Hey Jakester.......you going to upgrade your suspension eventually? Cartridges/shock?
The beginning always makes me crack up so legit always rewards a like
What do y'all think about frame sliders? I heard if you do end up sliding the frame sliders could actually mess up your bike
Is the fz-07 an adventure bike?
Can't get the T-Rex Racing 2013-2016 Yamaha FZ-07 MT-07 No Cut Combo Black in the UK sad times
Hi Jake, was wondering where you got the specs for the torque settings for the engine bolts? could not find it in the bike's manual
Nice slides what brands did you use?
Are there jacks like car lifts that you can use on an FZ07 that keep it stable and able to work on suspension? I feel that the rear spring is too soft for my weight and I don’t think I can work on the suspension with normal paddock stands.
Constands
Finally a new episode
I bought these as well. How often do you got your shin on the frame slider when coming to a stop and putting your foot down?
Uh my shins don’t seem to touch. I do like resting my left foot on em with my arm on my knee.
Jake TheGardenSnake yep. I'll throw my calves up on them on long rides and long a bit
hello do you know if this kit works for the new model MT 07 2018?
Hey man I just got the exact same case covers and sliders, fantastic feel and quality but I'm having issues with the case cover mainly with the left side one, i removed the three bolts the bottem two leaked oil as soon as they came out and now that the cover is on it leaks a bit on rides, they are as tight as i can safely torque before stripping the threads not sure what to do pls help
Just curious because I’m about to install my kit tomorrow. Did you ever figure out what the issue was with that side leaking?
Yeah!!!! T-Rex racing is awesome!!!!!
my set screws didnt line up with the front and rear sliders any ideas?
Can you get rear axel crash sliders with a built in stand spool?
Those frame sliders. I would imagine it would be better to put some loctite on those bolts right?
damn that engine looks so good
But how much weight did it all add?
Jake are you ever going to change out the suspension?
Stuff looks super nice.... but as an engineer and machinist... and just human. I can’t stand they didn’t provide the kits with blackend or coated bolts. They stand out so much now with only being galvanized 🙃
Informative. I'll definitely be ordering that protection kit. Big thanks, Dawg.
Looks like quality products and looks great on the bike.
For sure
wonder if the front suspension puck fits the Yamaha tracer 700 to?
Yo that same bolt he was talking about, got stripped on mine! What tool would I be needing now?
On the frame? Get a professional. They gotta try to repair it or drill it out and tap it to the next size. Not good bro.
Jake TheGardenSnake thxs mate, I’m hoping a thread chaser can do something before I take it in
Looks like good quality stuff
I love your content and especially the thumb nails for your videos
motor cycle in the mirror of your kids power wheel is a nice touch.
Nice video sir. Where did you get that swiveling ratchet at bro?
Do you remap ecu after installed exhaust, bro?
Do they build these for MT-03 ?
Hey, what's that on the back fork called?
does this kit fit for Yamaha mt 125 2018 model?
Are the sliders made of steal or what? Sorry didn’t hear you say it in the video
King Matthews it’s like very heavy plastic on the actual pucks and then steel on the inside of pucks
How much torque is needed?
Why not just get the rear spindle stand sliders?
Where did you get those stubby allen sockets?
Can't wait to see you test them all :) Are you going to change the chain and possibly the sprockets? even if you keep them stock size but change the colour of the rear sprocket and chain.
How you keep your bike so clean
I just watched you drive past my job in Melissa about 5 minuets ago.
I have the same torque wrench. It's like we're torque wrench brothers! Yay!
Would these work on the 2018?
are those the stock foot pegs?
where did u buy the sliders?
How do you protect the gear shift?
links dont seem to work anymore :(