Thanks Tim🙂 Yeah I was a little surprised how stable it was actually, felt amazing! And yes the wing suits it so well, much stronger than the lexan wing aswell, they are terrible😆
@@rccrazy Yeah, I have yet to see a lexan wing hold up to much of anything. I guess the only reason why any company still uses them is for production cost savings.
Great video. My son just broke his steering link and I can't find a replacement. Looks almost the same as the hypergo but since it's 1st brake, it's time for upgrades.
Thanks mate👍 The steering assembly in this is different to the hyper go trucks, similar but everything is longer in the wltoys. I haven't got any of the newer hyper go's though so the new parts may fit this wltoys🤔
The newer mount is doing great, bit different shape, my original one did move slightly and stripped another spur😅 I would probably just stick with the stock mount but use the bigger pinion for more speed.
@@rccrazy Ye but its not an option if i wish to shove a 3660 in it 😅. How does your new one differ from the CF one you showed in this video? I assume original one doesnt have a chamfer for the head of the screw so it could move? Thanks
@bismuth7730 why not? If your making a custom mount you just have to make it taller, mod and cut a bunch of stuff and hey presto🪄 you can fit a 3674🤪 No I don't recommend doing that, the drivetrain WILL NOT like you very much🤭 But no, my original one was slightly too narrow for the slotted part the original mount goes into, made the new one wide enough so it kinda jambs/presses into the slot very tight, as long as it's not too tall you should still be left with no gaps around the gearbox/spur gear part👌
Nice video man but I'm doing my friends car and I have a 2938 6850kv motor and no I didn't have a typo it's really 29mm with a 120a esc 19t pinion and 124019 spur I've ran it but not full throttle because the esc is to large and I'm waiting on the phat body to come in
Thanks mate👍 Yes I have a few 29mm motors, got a 2950 5900kv 4s motor, it's insane! And if you remove the fan you can fit a 120a in with the stock body. I'll probably run mod1 gears though, keep stripping the wl cast metal gears.
Are you in vic? I think i saw a vic number plate… If you are Where are some good places to go for speed runs for something that theoretically will hit over 150kph
More specifically Melbourne but yes Vic. I'm sure there are some awesome and CRAZY long roads around but I personally don't have many places for speedruns, the spots we go for our 100mph+ cars are all quite a drive for me with my specific type of PTSD.
@@rccrazy yea fair enough man, im in south east and we have a fair few industrial estates but all seem to be busy on weekends too.. traffic only slows up at night and theres bugger all lighting
Yeah we have the same problem here aswell, traffic everywhere all the time except one spot we go which is miles away😫 I'm from Portland originally and mate the roads I could've been driving on over there OMG🤩
Wow you are genius! Can you charge the stock battery not with a isdt charger? Can you charge it with the original 🔌 charger only? My isdt says battery chemistry wrong
You can charge the stock battery on ISDT chargers, if your getting a chemistry wrong warning you may have damaged the battery or the charger could possibly be failing/faulty.
Thats mental bro! Chuck in the ESC from a 12016-7 its a 60A .... A dumbo Gyro maybe?... it will lub you long time! hahah... Great hack as always me ole mate!... Stay crazee and take care🤪🤪
Yeah I was super happy with 80+ on the stock esc, definitely need a higher amp one for reliability though😅 And yeah the wing, wasn't sure if you needed it still or not but it looks so good on this car, thanks🤘
Thanks for your great video! Your great video is why I have purchased one but I have big problems with steering straight. I wonder if this normal or problem of the servo ua-cam.com/video/s3KA8Nn2YhI/v-deo.html
Oh yes I can see it is the servo saver, you can remove the whole white servo saver with a solid servo horn, that will remove the slot but the servo will not be protected and it can break easier. OR You can maybe try a rubber band or wire tie/zip tie around the part that should open to protect the servo.
No guys, I didn't grow a full head of hair overnight, I lost the intro footage and had to film a new intro after the fact😅
Enjoy😁
Yerrr riiiite hahahah
Good video. Nice bash session and speed runs. As someone else mentioned, the car seemed really stable. That wing looks really cool on that car.
Thanks Tim🙂
Yeah I was a little surprised how stable it was actually, felt amazing!
And yes the wing suits it so well, much stronger than the lexan wing aswell, they are terrible😆
@@rccrazy Yeah, I have yet to see a lexan wing hold up to much of anything. I guess the only reason why any company still uses them is for production cost savings.
That's it, has to be production cost, although these sturdy HSP or even 1/10 Arrma wings are about the same price as some of the lexan wings🤔😆
Great video. My son just broke his steering link and I can't find a replacement. Looks almost the same as the hypergo but since it's 1st brake, it's time for upgrades.
Thanks mate👍
The steering assembly in this is different to the hyper go trucks, similar but everything is longer in the wltoys.
I haven't got any of the newer hyper go's though so the new parts may fit this wltoys🤔
Great run! Can't wait to see it faster‼️👍👍🦾🦾🤘🤘
If I can get it to 100kph or around 60mph on 3s I'll be VERY HAPPY, then we see what it can do on 4s, maybe🤣
Thanks heaps as always Dome😜🤘
Thank you for sharing. That's a little rocket isn't it :)
You are very welcome😁
It sure is a little rocket, got to try and get it to 100kph though, we might actually get lift-off😅
Looked really stable while bashing!
It really was, kinda surprising with such small wheels actually
Cool little car! How did that carbon motor mount end up working? Is it good enough to stay as permanent solution? tnx
The newer mount is doing great, bit different shape, my original one did move slightly and stripped another spur😅
I would probably just stick with the stock mount but use the bigger pinion for more speed.
@@rccrazy Ye but its not an option if i wish to shove a 3660 in it 😅. How does your new one differ from the CF one you showed in this video? I assume original one doesnt have a chamfer for the head of the screw so it could move? Thanks
@bismuth7730 why not? If your making a custom mount you just have to make it taller, mod and cut a bunch of stuff and hey presto🪄 you can fit a 3674🤪
No I don't recommend doing that, the drivetrain WILL NOT like you very much🤭
But no, my original one was slightly too narrow for the slotted part the original mount goes into, made the new one wide enough so it kinda jambs/presses into the slot very tight, as long as it's not too tall you should still be left with no gaps around the gearbox/spur gear part👌
Good Day What is The Size Of The Rocket Fan That You Install
I believe it's a 35mm fan
Nice video man but I'm doing my friends car and I have a 2938 6850kv motor and no I didn't have a typo it's really 29mm with a 120a esc 19t pinion and 124019 spur I've ran it but not full throttle because the esc is to large and I'm waiting on the phat body to come in
Thanks mate👍
Yes I have a few 29mm motors, got a 2950 5900kv 4s motor, it's insane!
And if you remove the fan you can fit a 120a in with the stock body.
I'll probably run mod1 gears though, keep stripping the wl cast metal gears.
Are you in vic? I think i saw a vic number plate… If you are Where are some good places to go for speed runs for something that theoretically will hit over 150kph
More specifically Melbourne but yes Vic.
I'm sure there are some awesome and CRAZY long roads around but I personally don't have many places for speedruns, the spots we go for our 100mph+ cars are all quite a drive for me with my specific type of PTSD.
@@rccrazy yea fair enough man, im in south east and we have a fair few industrial estates but all seem to be busy on weekends too.. traffic only slows up at night and theres bugger all lighting
Yeah we have the same problem here aswell, traffic everywhere all the time except one spot we go which is miles away😫
I'm from Portland originally and mate the roads I could've been driving on over there OMG🤩
Wow you are genius! Can you charge the stock battery not with a isdt charger? Can you charge it with the original 🔌 charger only? My isdt says battery chemistry wrong
You can charge the stock battery on ISDT chargers, if your getting a chemistry wrong warning you may have damaged the battery or the charger could possibly be failing/faulty.
@ thanks 🙏 for answering. I will get another Lipo and check if it is the lipo or the charger
@ I have been driving it for a while. After I was able to charge and empty for storage just for testing. Thanks for your help from Berlin!!!
Thats mental bro! Chuck in the ESC from a 12016-7 its a 60A .... A dumbo Gyro maybe?... it will lub you long time! hahah... Great hack as always me ole mate!... Stay crazee and take care🤪🤪
Excellent for a little 45a esc for sure.
Yeah I think 60a should be plenty for 3s and yep I'll be running a DumboRC👌
Thanks mate😜
@@rccrazy
Nice speeds right there. Not even running foams. 🙂. And no you don’t owe me a wing. You have helped me more than enough. 👍🏼🚗
Yeah I was super happy with 80+ on the stock esc, definitely need a higher amp one for reliability though😅
And yeah the wing, wasn't sure if you needed it still or not but it looks so good on this car, thanks🤘
Stock Esc can handle the 5900kv?
It depends on the motor size, 2438 5900kv possibly but a 2845 5900kv NOT A CHANCE!
I could hear the power being sent to the motor fluctuating.
Oh wow really😆
I didn't think it was audible on the video but I could definitely hear and feel it in person, it wanted to die🤣
@@rccrazy Poor thing, one could hear that it was not happy.
Thanks for your great video! Your great video is why I have purchased one but I have big problems with steering straight. I wonder if this normal or problem of the servo
ua-cam.com/video/s3KA8Nn2YhI/v-deo.html
Thank you!
But that's no go you are having issues with yours, I will see if I can help.
Oh yes I can see it is the servo saver, you can remove the whole white servo saver with a solid servo horn, that will remove the slot but the servo will not be protected and it can break easier.
OR
You can maybe try a rubber band or wire tie/zip tie around the part that should open to protect the servo.
kph? what is that. UA-cam, don't recommend channel.
Why be rude about it?
Did you even look at the video?
I show the mph in the video🤦
So sick of people like you trying to control other people's channels, so rude and disrespectful!