That Did Not Work!!! Day 1 Fall Manure Hauling
Вставка
- Опубліковано 9 лют 2025
- Join along as the air seeder setup battles me. Right into some fall manure hauling to get prepared ahead of cover crop seeding. Thanks for watching along.
Merchandise store- duffyag.com/
Would a belt and pulley setup work? Offset the hydraulic motor, put a large pulley on the motor, and a smaller pulley on the blower. Probably cheaper than another motor and adds a bit of give to the system to prevent damage. Just a thought.
I was thinking the same thing!! Little bit more fab, but pulleys are cheap and so are v belts
I just posted the same idea before seeing you beat me to it.
I was thinking the same thing. I wonder what rpm the gas engine ran at and what the engine used to drive it. I wonder is that set up might work with the hydraulic motor
Petrol motor would have been running around 3400rpm full speed. Try running hydraulic drive off the semi truck hydraulics to see if it can get to speed.
Great job Chris and Yenko
Hauling manure and enjoying it. The farm life is fun even if it's hard work. Hope you have a great evening and Take Care
I like how the dog follows you when you driving
Your by roads are almost as narrow as ours.... the bane of our lives!
smelling it in the spring best smell know when spring is here
Nice big pool should have a pool party. Have a good day.
Keep rockin'it....almost 50 k subs.... Stay safe.
You're unstoppable you'll figure out the way to do the whole thing no matter what happens
Mcmaster-Carr has machinable couplers. 1" keyed shaft on one side and the other side can be drilled out to 7/8.
Should put gas motor back on . Flow differs from tractor according to year and model.
Hey buddy you can get what they call love joy couplings with different shaft sizes they have a rubber piece that goes between the couplings
Yeah Peter or chain and sprocket
Just find out what speed you want and then get the right pulleys to achieve it. Have a great day.
7699 views, 1100+ likes and 0 dislikes.....very good to see...congratulations
Use lovejoy couplings can get different shaft sizes
On a different note I was just watching Big Tractor power and there's a drone shot of you chopping into the mack😎
If anyone complains about the aroma, just tell them it is organic 💩😆
what if you hang a rubber hose off the fill pipe
It's an easy fix put a big sprocket on the pump and a small sprocket on the fan run it with a double chain
Who hasn't done that move, try to same money and in the end you have to buy something different, and have a few things you may or may not use
I would talk to your hydraulic shop. Most shops can get you any variation of motor. If you know the Rpms and oil flow they can make it work
Sorry about the air spreaders but a great job you tried thank you for sharing and your time was great anyways loved it.
Gust move the pump over and ether run it chain drive of belt drive to speed it up that way u can save some money
speed up your pump with a belt 3 in pulley on the fan and a 5in on the motor
Chris you really get after that P&J sandwich
Also I know alot of people don't know about it. But if u have a steel mill around you can get bulk slag ( what it's called at AK STEEL by me.) But you can get the stuff for $3 a ton. I wouldn't use it as a foundation but if u need material you can get a shit load for pennies on the dollar. So many farm Lanes around here have the slag under there lime stone.
Just a thought fertiliser sower on the tractor and rolling basket with long tongue in below it , sow cover crop and run with rolling basket in one pass job done regards from N Ireland .
"Wish you could smell it", remember how much the farm paid for dry fertilizer? To me, I would say it smells like money saved!
Got my old 2350 JD stuck in the woods to the belly. Had to get the old four-wheel-drive Ford in the woods with a snatch block to get it out.
would using a pto pump work to get the volume "pressure" of oil to the motor run blower faster, could also run pto at 1000. if 540 doesn't make the volume "pressure"
Yeah I would love a shirt like that can’t wait to get my Duffy shirt
find out what the volume is on the 700.00 pump and compare it to the one you have. sometimes them pumps have restrictors in them that you can change out or some that you can just turn them up
Like others said chain/pulley/gear from motor to blower shaft to speed up the turn rate of the blower spindle.
Half jokingly but could you use a variable speed bike gear selector to get various speeds to blower shaft. Only downside is i don’t know if it would last with bumps of field work…
Fill the tire with foam
could you use two pullies a small and a large and a belt to speed up the fan with the motor you have?
That’s some good looking Heifers there.
love manure hauling videos
You better not let the game and fish see you harassing wildlife
I think most small engines like that are governed to 3600rpm.
I don’t know how you get along putting it on top. Around here the neighbors would have a fit if we did that.
Dang utility poles right on the road
I can smell it from here
I would put a metal wheel on that air planter.
Use a gear and chain set up like a bike. Can increase speed that way
monsoon season upstate ny
Does Yenko have a water bowl in the truck.
too much sauce not enough apple🙌
The return off the hydraulic motor should be ran back to case drain so you don't over heat hydraulic fluid
How much did you draw down the storage tank?
Could you maybe make a video when you aren’t busy on what you own and what the farm owns
what is the seed capacity of this seeder
so Yenko likes running in cow poop my dog loves rowing in it
Can't you use parts of your tank to upgrade the farms tank
Can't you seed some grass on your sandroad
you should make a shirt of "we're in a good boat" lol
are you using a hydro pump or motor.....there is a difference on how they work
Why not just bandclamp a vinyl hose to it? Cut for length for the manure fill up.
5, 10 years ago you (or the state?) planted cover crop (i don't know what exactly) using a helicopter before you harvested the corn. I have it on video somewhere and then a Park Ranger ruins the shot yelling at me to not get too close right after someone involved in that work already told me to stay put. Anyway do you still do that? Was it not cost effective Would be a good video for your page views.
The counties cost shared that program. Good idea but not good results. Much rather seed it how we did this fall and have manure applied prior to make sure it is incorporated. Was cool tho
Not as bad as liquid pig poop
Was that your mom ??
What does your dad do around
the farm ??
Why not just get a harbor freight engine for the seeder
The more I watch that mini loader , the more I want the kabota mini loader ZIMMER tractor. But I won't buy a kabota. Please call Ohio hydraulics . Best hydraulic place I've ever worked with. I've been all over the country. Thank god they are 20 min away. Just tell them how many GPH or maybe they can rebuild yours to work. If u call them I'll let u use my account discount
I hope yenko isn't as bad as my dog. My dog lexa chases bees all day long
seeder rent one
Stop stop stop. Rework what you have and use pulleys and a belt to gear up the speed you need. You can also use a automotive serpentine belt tensioner to tension the belt then all you have to figure out is the correct pulley sizes and pulleys are cheaper then pumps and the. You can make any pump run the speed you need and it’s solves the Different shaft sizes. Just rebuild what you have and save money
Also you can slot holes to slide your pump to properly tension the belt and add an automotive automatic spring tensioner to keep tension on the belt.
oh boy the bikers with nutless spandex are gonna cry lmao
Buy once, cry once, bro.
Greta didn't get the "can't control that" memo. Neither did dem politicians.
Who was that your mom? Get that gas engine repaired before blowing anymore money on just an experiment, my opinion.