MV-22 OSPREY 1/48 HOBBYBOSS scale model aircraft building
Вставка
- Опубліковано 4 лип 2024
- 하비보스사의 1/48 스케일 MV-22 오스프리의 조립, 도색, 웨더링등의 전체제작영상을 담고 있습니다
This video shows the entire build of assembly, painting and weathering of the Hobbyboss 1/48 scale MV-22 OSPREY kit.
몇년 전에 이탈레리사의 오스프리를 만들었었는데요
이번에는 하비보스사의 신제품 오스프리를 만들어 봤습니다
이탈레리사의 오스프리에 비해 가동 부위도 많고 좀더 디테일하지만
두배 이상의 가격은 조금 비싼 감이 있는 것 같습니다
또한 설계상의 미스인지 핏이 안맞는 부분도 조금 되는군요.
그리고 킷에 포함된 VMMT-204의 20번 기체의 데칼을 적용하기에는
설명서에 오류가 있습니다 실제 기체에는 레이더와 급유프로브가 없지만
설명서에서는 그것을 적용하도로 지시하고 있습니다
그럼에도 1/48스케일에서 하비보스외에 유일한 대안은
이탈레리 오스프리가 유일하군요
하지만 이탈레리의 오스프리에 대해서는 언급하고 싶지 않습니다.....--;
하비보스의 오스프리에 대해 개인적으로 점수를 매기자면
10점 만점에 7점 정도 주고 싶네요
A few years ago, I made the Italeri's V-22 Osprey.
this time, I made a new product of Hobbyboss's MV-22 Osprey.
compared to Italeri's Osprey, there are many moving parts and more details, but the price, which is more than twice that of Italeri, seems a little expensive. also, there were some cases where the fit didn't fit as if it was a design mistake. and there is an error in the instructions to apply the decal for aircraft 20 of the VMMT-204 included in the kit. the actual VMMT-204 aircraft No.20 does not have a radar and refueling probe, but the manual instructs to apply it.
nevertheless, on the 1/48 scale, Italeri's Osprey is the only alternative.
but I don’t even want to say anything about Italeri's Osprey.... : (
If I personally score HobbyBoss’s Osprey, I’d like to give it 7 out of 10.
instagram: / takeoffmodels
airbrush: IWATA HIGH PERFORMANCE PLUS HP-CP 0.3mm
compresor: Extreme Air Compressor(究極,궁극컴프레셔) KC-T002 25psi(1.7bar)
paint: IPP lacquer paint, clear & surfacer, Tamiya enamel & acrylic paint, AK paneliner, MIG Panel Line Wash,
0:00 Intro
0:17 Cockpit
7:06 Fuselag Assembly
17:55 Painting
24:04 Weathering
29:15 Final Reveal
#프라모델 #MV22 #modelbuilding - Навчання та стиль
Unbelievable stripes masking!!! Just f*king unbelievable!!! You should show even little part of this process! Thanks for the emotions!
That's a great build! And that stripe masking, it's a major sanity drainer, at least for me :D, you deserve a medal just for that alone!
Awesome build and video! Thanks! I spotted one at my local and snatched it up now really jazzed to build it. Cheers
Hope you and your family are safe and healthy! Can’t wait to see your next build
You technique is flawless. Amazing work mate.
I’m buying this kit on the back of this video! I particularly like your airbrushing technique but would like to see it in real time and understand the pressures you use and paint/thinner ratios
Basically at 24 psi ... but I use a mini filter that I can adjust to change the pressure. So I don't know the exact pressure.
paint : thinner = 1 : 1.8
Outstanding looking model. Great job!
예전에 건강에 문제가 있다고 하셨는데...
건강하게 복귀하시길 기원합니다.
다음 작품 기다리겠습니다
Nice build, thanks for sharing
Once again great work !
Definitely like your painting and weathering skills. Thanks for sharing.
Awesome job 👍
Outstanding build, great weathering too 😍👌👍
Great work
Very nice love the weathering
정말 대단하십니다. 앞으로도 좋은 영상 부탁드립니다~.
REAL painting techniques are great!
Amazing. Congratulations from Brazil.
Awesome work 🎉🎉🎉
Cool!.. and nice music.. thanks👍🇳🇿
Fantastic!
Hello @TAKEOFFMODEL, very nice job 👍 and excelent model of hobbyboss 👌
Looking gooooooooooD!!!!!
요즘 코로나로 힘든데 영상 보는 맛으로 삽니다
테코프님은 괜찮습니까? 건강하세요
Amazing work , well done , i just bought this model ty :)
Really cool model.
Cracking job in that mate! Been wanting this kit myself think I'll go pick it up today!
Okay... you blew me away with just painting the propellers lol...I may have to rewind it a couple of times to figure out how you masked them to get it right when I do get around to building that particular kit 😆..
정말 멋집니다! 넋 놓고 봤네요..ㅎㅎ
This is amazing. I dont know how i didn't find you earlier!
GOOD‼️大変美しいですね、ただただ感心します。🌟🌟🌟
nice video!
Ottimo lavoro
이형은 꼭떠야해
Oh and by the way you did an awesome job with the kit I might add...
Gran trabajo!!!!! eres un Maestro👌👌👌
Thank you very much brother
Ridiculous. Amazing
Wow just wow.😀😀😀😀
테코프님 활동 접으셨나요? 인스타도 그렇고 6개월 전 활동을 마지막으로 아무 활동이 없으시네요
다음 작품 기다리고 있겠습니다
Don't know if your going to see or read this But....I like the trick ( painting,) that you did with the deck. using the yellow and black. Judy wished you would have mentioned the size of tape you used to mask the deck with.
이야 정말 잘만드시네요 프라모델 입문하는 초딩인데 테코프님 영상보고 잘 해볼께요 홧팅!
난 중딩 아 나도 초딩때 입문했네
I build models. YOU build ART
다음 영상만 기다리고 있는데 왜 아무 소식이 없나요?
혹시 않좋은 일 있으시면 빨리 해결되길 바람니다.ㅠㅠ
its just a little bit overweathered (my personal taste I prefer a little more clean) but it was very well done overall
I’m not into after 1945 stuff that much, but that’s cool 🤘😌.
Красиво)!!!!
Красиво)!!!!
요즘 건강 하신가요? 모형 만드신거 전시 해놓으신거 보여주실수 있으면 좋겠어요. 만들고 전시하는 비법도 알려주시면 감사하겠습니다
Just a comment for the algorithm
same here
Nice build!!Habe you added weight to the nose to prevent tailsitting??
I didn't put any weights on the nose
너무 멋집니다... 근데 뜬금없지만 영상의 14:05~17:55 사이에 나오는 음악 제목혹시 아시나요 ㅎㅎㅎㅎㅎ
사람의 손이 아닌듯!!
C-130 해주실수있나요??
안녕하세요 테코프님. 영상 잘 보고 있습니다.
타미야 아크릴 도료로 에어브러쉬 도색(1:1.4정도)을 한 후 아이피피 cm60 슈퍼클리어 무광을 전용 희석제로 희석후 건조시키면. 모델의 색이 약간 변질되는데 에어브러쉬 청결 문재인가요?
그리고 타미야 페널라인액샌트는 에나멜 신너로 지워지는건가요?
역시 고수시네요 ㄷㄷㄷㄷ 리벳 파는공구 구매처좀 알수있을까요?
www.victorymodels.com/collections/supplies/riveting-tool
케이바니퍼를 오래 쓰시는 것 같은데 괜찮은 편인가요? 지금 쓰는 니퍼가 녹슬고 날이 무뎌져서 바꾸려고 합니다
제가 니퍼를 크게 상관 안하기에 케이바 니퍼는 그냥 저냥 쓸만한 수준인 것 같습니다만 외날 니퍼를 한 번 사용해볼까 하고 있습니다
@@TAKEOFFModels 저도 양날보단 외날을 생각하고 있습니다. 날이 무뎌질수록 절단면이 너절해지는게 눈에 보이더라구요... 외날로 구매하는것으로 해야겠습니다.
테코프님 괜찮으신건가요? 반년째 아무활동도 없으시네요 ㅠㅠ 기다리고 있습니다! 다음엔 f-35a 해보는것도 괜찮은거 같습니다.
He is offline on Instagram either. Maybe he’s gone due to covid. Rest in peace dude!
@@danielbrandao3166 don't kill him
@@maximumg2537 on the contrary, I hope he’s fine!
얼마전 구독해서 열심히 보고있는 사람입니다. 에어브러시는 여건이 좀 안되고 (와이프에게 죽습니다.) 붓도색은 뭐랄까..표면이 좀 거칠고..해서 스프레이캔으로 도색하고싶은데
경계선이 딱 떨어지는게 좀 아쉽고..이런 사람을 위한 영상도 혹시 만들어주시거나 팁을 좀 알려주실 수 있을까요?
만들어보고싶은건 주로 2차대전 프랍기입니다. 특히 독일군 점박이 무늬같은건 에어브러시말고는 답이 없는거같은데~ 스프레이도로 가능한 방법이 있다면... 부탁드립니다.
저도 정말 비슷한 상황입니다. 혹시정말 비슷한 상황입니다. 혹시 스텐실을 이용해 보는건 어떠신가요? 물론 에어브러시만큼의 효과를 내긴 힘들겠지만.. 멀리서 떨어뜨린 후 분사하면 어느정도는 봐줄만한 점박이 무늬가 나오더군요. 모형전문샵을 뒤져보면 점박이 스텐실을 아마 찾으실 수 있을거에요.
쿠팡에 보카시 솔이라고 쳐보세요 붓 끝 쪽이 둥근 붓 있어요
@@jinkim955 감사합니다. 그방법으로 독일군 점박이 무늬 대략 성공해쎈요 ㅎㅎ
Kfx 만들어주세요
없는데 어떡해 만들어요 ㅋㅋㅋ 그리고 지금 개발중인데 모형이 읎죠 ㅋㅋㅋ
프라모델 어디서 사시나요??
인터넷으로 사시겠죠?
I sent you a message on Instagram.
I replied to your message