Thank you for the guide. I have a question about Dialer1. I've done everything what you have shown but i don't know why my Dialer1 is 'unassigned'. Do you have any idea?
I did the same for Cisco 1941 router, but I didn’t use dialer interface, instead wan was leased line with static public IP. Also pppoe wasn’t required cause it was directly connected to isp provider network. Correct??
Someone says CCNA, CCNP, CCIE in Routing-Switching might lose its popularity over the time in next few years, as the industry is shifting towards cloud, network virtualization (SDN/NFV). The Internet of Things (IoT) BIG today. This and Cloud infrastructure will make Security related courses very popular. Then what would i do? Go for ccna or having sdn?
anyone know how to configure a cisco 892 it have an dhcp but the rest of the interfaces dont get an ip from the dhcp of my modem but ge0/0 has an ip adress but i cant connect to the internet
Please help I have cisco 1001x with pppoe configuration and want to share the traffic of IPTV and internet. while playing iptv and internet on the same time iptv is buffering kindly share me the configuration
Me ajuda amigo,coloquei todas essas configurações, o PPPOE sobe,porém nao consigo navegar na internet Help me friend, I put all these settings, the PPPOE goes up, but I can't browse the internet
Please I need help! I have a cisco 1905, it doesn't want to reset and an orange LED flashes 9 times for a period of 3 seconds and comes back flashing again, I tried resetting 15 seconds, 30 seconds and nothing! can you help me? Failed all 0xffffffff test Bad RAM at location 0x80403000: wrote 0xFFFFFFFF, read 0x00000000 %%ERROR: DDR memory test failed! Stop.
finally someone who actually configures instead of hearing his own voice for 25mins shows the end of it all.
Thank you so very much for the detailed explanation, also showing the show run helped me compare my configuration against yours. Cheers!!!
excellent tutorial, a lot to see tutorial with drawings and theory...yours is very practical.Congratulations 👍
great! backround music makes me sleepy )) thanks a lot!
Thanks for your cooperation sir
Thank you for the guide. I have a question about Dialer1. I've done everything what you have shown but i don't know why my Dialer1 is 'unassigned'. Do you have any idea?
Красавчик, спасибо :)
nice work bro
Awesome sir
Amazing content bro keep it up...
I set same config (Dialer 0) on my routers(1861) adsl module (hwic1-adsl) . What did you connect to gig0/0 interface ?
how to connect broadband leased line connection via static public IP given by service provider?
great. thx bro
great Job
I did the same for Cisco 1941 router, but I didn’t use dialer interface, instead wan was leased line with static public IP. Also pppoe wasn’t required cause it was directly connected to isp provider network. Correct??
Yes, you dont need PPPoE config if your ISP modem is setup in route mode. You can only use that if your modem is setup in bridge mode. Hope it help.
great
Какая его пропускная способность с учётом нат и аксесс листов ?
Looks like you gotta know a lot of commands. I’ve been thinking about investing in used Cisco equipment.
Hey the code is very nice! i have router cisco 2911 and the code is very nice in this version router ipv4 and ipv6 dual mode!
please could you provide the commands you used for configurating the cisco router please
why you didn't configure ip dhcp excluded adress? for non overlapping gateway ip with host ip?
Is there a way to make all windows requests go through a proxy
Good
Hi how are you ? Thanks for this video
Nice video
Thanks
good
Класс Cisco
top
Nice video #technologymistry
Thanks Machi
Welcome
Someone says CCNA, CCNP, CCIE in Routing-Switching might lose its popularity over the time in next few years, as the industry is shifting towards cloud, network virtualization (SDN/NFV). The Internet of Things (IoT) BIG today. This and Cloud infrastructure will make Security related courses very popular. Then what would i do? Go for ccna or having sdn?
What did you choosed?
👏👏👏👏👏
Love from Pakistan
😂😂
Hello, do you have video Convert Cisco AIR-CAP2702I-A-K9 Lightweight AP to an Autonomous AP. Thank you.
Thank you, can you give me the code of this configuration
anyone know how to configure a cisco 892 it have an dhcp but the rest of the interfaces dont get an ip from the dhcp of my modem but ge0/0 has an ip adress but i cant connect to the internet
u should explain all commands working
Your videos are really incredible, you could make one to configure a HUAWEI N8000 SERIES router
Please use your own voice...otherwise video is Great and knowledgeable...very practical appraoch
thanks 😍👍
Is this config in .txt?
everything is good can provid the commands you used for configuration the ciscso router plse
2911 are really fun to migrate
В 21 веке можно было бы и web морду прилепить для удобства .
Which Router have been you use in this Video
Thank you very much, but the way to convert from rg11 to rg45
how to put SERVICE PROVIDER NAME IN THIS ? as my ISP saying you must PUT service Provider name please any one help me
Is a workshop to see which computer has a problem ready for system resources
Dear make video how to configure Digisol HR 3300TA PPOE,DHCP????
Eu não conseguir navegar,mesmo depois de aplicar todas estas configurações
thank you very much for video its very use full for beginner, please let me know RJ 45 to Serial connector pin connection arrangement ...?
Please help I have cisco 1001x with pppoe configuration and want to share the traffic of IPTV and internet. while playing iptv and internet on the same time iptv is buffering kindly share me the configuration
how to set secondary DNS server on DHCP pool ??
Can cisco make a hotspot same with mikrotik hotspot? Thanks
no
Thanks alot can you put text file for configuration
I was that
No access-list 1 configured for Nat correctly work
it's helpful nevertheless you are so fast.....please keep slow....
I have TP-LINK ER6020 router and Cisco 3560 switch, now I want connect router switch, how to connect? help me.
More Configuration Videos Required
Bonjour j'ai un smartbox j'aimerai l'utiliser comme un POE
How to PPPoE configuration on cisco router 1841
Hi I am trying configure Cisco router 1921 but the internet stop working I have cable modem with spectrum isp
Me ajuda amigo,coloquei todas essas configurações, o PPPOE sobe,porém nao consigo navegar na internet
Help me friend, I put all these settings, the PPPOE goes up, but I can't browse the internet
Conseguiu resolver ? Tb não consigo navegar tb não.
can i use the wan port as dhcp-client without pppoe?
yes, use ip address dhcp command
Net VN why don't you post config in the description ?
Kann der Router auch als IP telefon Anlage benutz werden und so eine Warteschlange auf zu bauen?
And voip with protocole ss7
Please, can you tell me how to install my security Crt
use putty, securecrt is not free
very helpful video , could you send me the text file ?
Please how to configure vg224
Thanks ,but where is access-list 1 konfig
Подключать так же просто ?😳
Why dialer 1?
Could you send us the commands used in the video?
how much router i can Dail-up in 1 PPPoE account???
فشتو ودیوجول کرین
Thanks for your teaching but I don’t get what you’re doing!
Bro Speak with your own voice, it will be better
Thank you alot 😊 but can everyone explain me what uses for? I'm not good at network sorry 😐
Where you have doubt ask i will explain
Please I need help!
I have a cisco 1905, it doesn't want to reset and an orange LED flashes 9 times for a period of 3 seconds and comes back flashing again, I tried resetting 15 seconds, 30 seconds and nothing! can you help me? Failed all 0xffffffff test
Bad RAM at location 0x80403000: wrote 0xFFFFFFFF, read 0x00000000
%%ERROR: DDR memory test failed! Stop.
Faulty ram module on the mainboard... needs repair (BGA RAM module replace) or just buy another
Would you share this script plz ??
can you give me a code
Very fast
whats pppoep
and nothing about security ?
Kannst mir bitte alle eingaben als text zusenden,
Danke !!
V
哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈
Что все на англиском
ভাইজাম,আপনার নাম্বারটা দেন।
Too fast to capture things😒
pause,or slow down the video
COM Port??? Nobody has it anymore!
you can use the usb to rj45 console cable instead
to hell with this robot voice
typing too fast.
can we ban these damn robot voice videos
Ala gijdıllaq, yavaş-yavaş elə görəkdə. Qoymusan üstünə
great
Good
Nice video #technologymistry