How To Create 3D Gear Rotate Motion Animation In AutoCAD - Script (Rotate) Command
Вставка
- Опубліковано 16 тра 2017
- AutoCAD 2D & 3D Tutorials
In this video i show you
How To Create 3D Gear Motion Animation In AutoCAD -
used Script (Rotate ) command
Create 3D model Of gear & Copy It make for meshing two Gear
Create Note For Autpcad .scr File
1) Type Motion - Rotate
2) No. of Group ( Gear )
3) ID of Group ( Gear )
4) "-1 " Minus For Clock Wise Rotate Direction and 1 Is Speed of Gear
same method about Gear 2
Motion - No. Group - Id
5) "1 " Plus For Counter Clock Direction
6) type "rscript" of end
file save with .scr Extension
Apply SCRIPT command
select Save Note File
your Gear will be rotate on your Screen
just check out this video..
don't forget to subscribe my channel
like - share
thank you
~-~~-~~~-~~-~
Please watch: "How to Enable Numeric input on entity creation & Create dimensions Automatically when value entered"
• How to Enable Numeric ...
~-~~-~~~-~~-~
#AutoCAD_Script_Command
#3D_Animation
#Rotate_gear
Very nice vedio sir
Today we learn something new in autocad 3D about animation
Thank you very much sir
Please continue to making thease types of vedio.
Welcome ।।।
You're great .. very informative thankyou sooo much sir
Welcome Dear.........
Nice, simple to follow, I assume you can use block names too for the gears rather than group names. I like how you cut out the long boring waits and consolidated the video, that goes a long way in making a good tutorial, good job!
Thank you...
For 3D gear with calculation pleas refer
ua-cam.com/video/S7yWMUCVU8M/v-deo.html
I was dying to see this..searched a lot.. finally got it.thanks to you.. it will be better if u taught everything visible n audible rather than background music
Thank you for suggestions..i try this
So swt of u
thanks , very helpful
Effective in simple way
Superb well done as thanks bro
helpful video, thnx 🙂
GOOOOOOOD man ....
nice and simple! How can i do the same animation with a 90 degres gears (perpendicular)? thanks!
Nice video. Can I ask where did you get the introduction where the logo of autocad is moving?
hi very nice video.
Khup khup thank you anket sir
👍
hello,
my design for this, (as per this tutorial) is not rotating continuously as per this design (just one little vibrate and then stop).
any suggestion where as i made correct note as per this tutorial.
where i am missing?
superb!
Bro can you make video on creating mechanical components such as knuckle joint using AutoCAD, Nx etc programing
good sir.tq so much
thanks & welcome
Amazing
Big fan bro
Let one empty line at the end of the script. I dont know why but in that case I dont need to hold enter for a continous movement! Otherwise the code stops.
Thanks lot
If use in hydraulic maybe need more clearance is better isn't it?
I created one gear.
But when I rotate it, it just rotate for few angle.
I want to make it rotate continuously???
if i wanna Learn The 3D CAD for metal founding where i should starting from ?
Thanks.
Is it possible to rotate different direction like differential gear
tres bon tuto mais la jai une question cmt enregistrer cette animation en mp4 ou wmv genre video /
how can i rotate both sides
first clock 90
then recenter
then counter-clock 90
again recenter
repeat
and how to do side moment ( right and left )
On AutoCAD 2018. I saw if u write Enter in Script after rscript its starting a Loop. BUT CAD is freezing sometimes
This is the problem of version...i also face this problem
It says that "-1" is an unknown command, therefore not executing the script, how do I fix this?
esa pequeña animacion de engranes se puede grabar como video??
Most people don't understand what is happening here....
By running the script you select an object by name (the group) and ends selection by the empty line 4 and after that you rotate the selection it by the given angle (1 in video, mentioned as speed)
At the end of it you restart the script by the rscript command.
Repeatedly rotating over a small angle provides the suggestion off continuous movement.
Nice script anyway..
wow
i writed this in autocad 2022 but it rotate just 1 degree what can i do?
Very Nice Video Sir,
Can you please provide the code for animation of four stroke engine, please I want to animate my engine on autocad
I tried but not possible in Autocad
Better way to use any 3D software ..like Solidworks, Invetor Catia etc.
is it possible to animation 2D motion using a script too, like moving object one from Point A to Point B?
Yes..its working with 2D drawings
Anket Kamtekar darn, i was hoping to be able to animate a 3D model. I’ll definitely be using this in the future tho! Thanks
which background music it is? is it Nocopyr8 ?
When I starting up the script it's saying: "Unknown command "ROTATE"." Have any idea what I'm doing wrong?
when i make the script file in notepad. that is not showing after the script command in autocad
thanks a ton, but how to mount gear on a shaft with motion analysis can you pls explain in steps sir pls?
AutoCAD has no any features to check ansis
I have a issue with the region, as the gear teeth created using Arc and Line not "joined". Any suggestion how to correct for this? Thanks.
When creat gear teeth with array cammand so its create with associate array..mean sigle entity ..
First explode this array and see all gear teeth are not in associate mean individual entity..
Then try to region or join..
@@anketkamtekar Thanks. I disable the associative on the polar array and can use Region to combine the gear.
@@edwintjoa6099
Sure...👍👍
How you disable can you tell me steps
sir why i got only once rotation when i open the scr file??
its not rotating continuously.
bernard bilazon
Just hold enter or space key ..
Greetings ... I follow all the steps but in the last step of writing "SCR" in autocad and selecting the gear.scr file that is on the desktop ...
autocad tells me: Unknown "ROTATE" command. Press F1 for help.
pls help!!!!
FREE sheet metal, gears, curves and others
www.onlinecadtools.com/myindex_en.HTM
www.onlinecadtools.com/english/html/sheet_metal/index.HTM
www.onlinecadtools.com/english/html/index_gears.HTM
www.onlinecadtools.com/english/html/index_curves.HTM
www.onlinecadtools.com/english/html/index_st.HTM
ua-cam.com/video/7W1_jJ1XWzo/v-deo.html
ua-cam.com/video/T-irEOEON2w/v-deo.html
Thanks!
I need advertising and orders
hi, thanks for this video . in my autoCAD only one gear rotate and that too onky one time, space / enter is not working too
AKILA IYYAMPERUMAL
Check script must ..
And hold space baar or enter tu continues apply this command then see your gear wheel rotate continues
it running continuously, i checked my script also but still gear 2 is not rotating. g1 is rotating
AKILA IYYAMPERUMAL
So what's the problem ... Now create new Autocad file and new script
problem is only one gear is running. both gear is not rotating
rotate
g
1
22.2878,12.5116
-1
rscript
rotate
g
2
14.9672,12.5116
1
rscript
Make this same video with voice communication so that everyone can easily understand which command you are using
Hi Sir, why rotate the gear when I need to hold on the enter key?
I does not work with me. I followed exactly but the result is the rotation did not move continuously. The rotation was jumping arbitrary (not continuous).
my objet only move once rhen i have to press enter for each rotation angle.
Crack
does it rotate continuously or run simulation just like catia
Must need to run command continues..hold space baar or enter key
Let one empty line at the end of the script. I dont know why but in that case I dont need to hold enter for a continous movement!
AutoCAD is dope
Think before comments...Autocad or any software are not dope..you are not able to use this...
@@anketkamtekar He means that it's great brother. Dope = awesome
Is there any way to rotate the gear continuously without holding space bar or enter key?
Its i try in older version of autocad ..its work continuing ..but in newer version must required to run this command again and again ..thats wile you must hold space bar or enter key..
There is one way,
While making script in NOTEPAD,
After write "RSCRIPT"...Just give one enter and save this file in script format ..and then run...definitely u will get your answer.
this worked for me, however, the speed of rotating is too slow@@gaurangkelkar4376
Favor, sigo los pasos hasta el último, scr y no me aparece la ventana del escritorio para copiar lo grabado, no se si puedes ayudarme, gracias
i cant understand whats the issue ....
can I just rotate halfway?
Its rotate motion so you can. Rotate 360°
Can we do the same with bevel gears?
Try it..
Hello brother i make it script file with .scr but i faced problem invalid point specify based point then i select center point of gear 1 but only gear 1 is rotate gear no. 2 is not rotating pls give me a solution
Make sure your script description is correct as show in video..
anket kamtekar yes correct
Hi sir I wrote the same scrip as yours but it only moves 1 step. My object is not a gear though
Matthew Sedicos
Its only for . Rotate motion....
You can rotat any abject around select center point
Dark Sad
Check script note again...
And try
Dark Sad
Check associate option when you create arrey command
i can't create regions... it says: 1 closed, degenerate or unsupported object rejected.
1 loop extracted.
1 Region created.
How to fix this? (i think he can't create regions using arrays)
Make sure your array profile not associate ..if its associate so explode it and try to region or join
Thank you, i will try
In complex drawing using macro so next time other can repeat save time
How would i go about changing the axis of rotation?
Change the id point
which one is the id point again?
If you want change the rotate axis so you can replaced the object axis center id
How do i change the rotate axis from the wordpad (if possible)? Sorry im super new to this
Greg B
Copy the axis point id of object which you want rotate...
And paste into wordpad on specific place
Sir, can we take same rotated video output.?
I can't understand what you say exactly
How can i use this comand in hydrulic celender
Shashi Shekhar
You can use this command only for object rotating
how can we enter the rpm and time period of the rotation????
Cadd Centre CST
You can enter speed of gear as RPM.. Can't enter specific RMP..
and there is no any option for timing.. When you enter scr command.. Object will rotate till command end..
It is not working for me. At my object would rotate once. I then would hold the space bar or enter but it does not work.
It asks me to select object and base point.
Some time its error in latest version..same problem i face in Autocad 2019....but its workong with AutoCAD 2017
@@anketkamtekar OK thanks. Didnt work on 2016 or 2020. Good to know for future needs though. thanks
@@michaelshilts3286
Welcome...
Try this in old version hope its works...
Is this possible with AutoCad Electrical ?
Try this...
Caique Florindo
Yes..
Hi Sir, can i use this method on bike chain
Better way to use 3D software..
Why when i want to region the gear, it cannot region ? I have make sure all the line joined.
Make sure your polor array is not associate..
Just explode the array and try to join this
I can't able to region the teeth and circle.. they r not joining.. can u pls explain
Plz check your teeth profile is not associate..
Hello...why mine needs to specify rotation angle?
btw i'm using the 2022 version
Bạn ơi muốn làm con trượt chạy ntn
Again I ASK You PLEASE show to me how to use Simulation in AutoCAD, I need it for testing parts and buildings, (from the basics for me)
(PLEASE do not advise you to use AutoCAD revit and so on)
Autocad have no option to check simulations of parts ...
You need to 3D software for that..
My gear is not rotate what I do
when I run the script, it appear {Unknown command "G"} (at group 2.)
How do I solve it, Please .
Sorry sir, I restart every steps carefully, and I get it.
Thanks a lot.
This script is only useful in 2d ,not for 3d.he faked this script
NO ME COJE EL -1 ME SALE COMO INVALIDO POR QUE ?
i did the same but not working in AutoCAD 2021.
AFTER ROTATION AUTO CAD HANG Y?
Its system problem..
How to increase speed of gear?
Check in video at time 5:00
how do i extrude in autocad 2020
Same command or tool as shown in video .. Doesn't matter which version you have.. Like Autocad 2017 ..18 .19..20
How about AutoCAD 2007 version?
Try it..no idea about 2007 version..
I hope its work with 2007 version
@@anketkamtekar thank you
@@leonardobird most welcome
Sir it doesnt work what i do?
Check the script
Autocad tutuorial Versi 2016 please
mine only rotates once why is that?
New version has run this command one time..just hold enter or space baar to run command agian and again
@@anketkamtekar also if I have 2 groups it wont run. But if I have only 1 object it runs.
@@arronnunez7230
Just change the rotation value and try...
my own script can not be located
there is a problem about scr , ı saved file same way but it couldn't find file can u help ?, if you understoood :D
Save the file on desktop
@@anketkamtekar That's what I did. The file is on the desktop already. I just can not get it from AutoCAD .No matter I typed SCR or scr, the screen was still showing " the file cannot be found".
@@joechung457
No dear
I say just confirmed it you have put dot . Before file extension in rename
Not a comma ,
@@joechung457
And when you select this file by Autocad then select all type file in browse
@@anketkamtekar I did put dot. Not a comma.The name of the file is " gear.scr" . I put the file on the desktop.
I need the lsp ..can you give it free ?
Excuse me sir, I tried this but it is not moving. What is the reason?
Check the script...then hold enter key ..to repeat command again and again
@@anketkamtekar they are asking me to specify base point
how to define the speed of the objects
Check at 4:58
1 value for speed ..you can increase this..
Mine won't rotate
Are you done all steps properly
Sir work nahi ho raha hai rotate angle
Required kya kare
it only rotate once
When i use region somethings wrong
Its issue with latest versions..
Just hol enter or space baar for run command continuely ...try it
Region in my drawing is not working
Make sure ..the profile draw perfectly..
Draw once again new profile in new drawing..
Expect to explain not a music background
no se puede, segui los pasos y nada
orvi acha ho sakta tha
unknown command "-1" anyone please help me
Which command?
@@anketkamtekar why it only rotate once sir?
I'm using autocad 2018
Autocad said
Unknown command "-1". Press F1 for help
@@andreimanguiat2788
I am also facing this problem in Latest version..its working well in AutoCAD 2017 ..but in 2018 ,19 & 20 its rotat at once in command..
Que yo no se que se podia hacer eso (soy un niño)
Voice please
Sure .. Thank for advice
@@anketkamtekar Thanks for your response and we are waiting for your updated video
.
yo encontre la solucion o el error como quieran decirlo
What is the solution brother. Mine is not working it vibrates a little and then stops. And through a error like unknown command 1 . Which I never pressed. Help
D