Excellent demos and information.... Thank you very much... Please if possible, make another video abt "communication between 2 mobile stations" means what information our module can gather from neighbouring mobile stations.... Thanks again, gr8 work keep up✌🏼
9:07 Didn't get "RDY', after Powered Down... What can i do now, i checked sim is working fine in my phone. but the insertion report still "Not Inserted".
I want to know if it is possible to communicate in the opposite direction. I want to call the SIM mobile number from a PC, to connect with the modem in order to use AT commands to get information from the modem about it's GPS (lat / long). Is this possible? The onboard modem is programmed to receive SMS coded texts.
Hi Edwin, Thanks a lot for your comment. With our SMS console, the customer can send SMS commands to the device. docs.emnify.com/portal/sms#open-the-sms-console docs.emnify.com/apn-configuration/gps-trackers#sms-console-teltonika In the example above, we send an SMS command “setparam 2001:em” to a device which triggers AT commands on the device to set the APN. Each device will have its own command set, of course. Note: the default source is the name “emnify” but some devices can only respond to a numeric source, so if a response is expected, it is often better to use a short number like “12345” as the source.
DEAR Sir I would like to know wether AT commands can be written in PIC assembly language via ASCII commands to help pic microcontroller communicate with simcom 300 2G/3G modem, thanks
I want to run AT commands on my pinephone and i have no idea on how to do it, this video gave me some info to start with, thank you.
Awesome presentation brother
Excellent demos and information.... Thank you very much... Please if possible, make another video abt "communication between 2 mobile stations" means what information our module can gather from neighbouring mobile stations....
Thanks again, gr8 work keep up✌🏼
Is there a way to see in the response whether the other person hung up or the call timed out? Or if the line was busy?
9:07 Didn't get "RDY', after Powered Down... What can i do now, i checked sim is working fine in my phone. but the insertion report still "Not Inserted".
I want to know if it is possible to communicate in the opposite direction. I want to call the SIM mobile number from a PC, to connect with the modem in order to use AT commands to get information from the modem about it's GPS (lat / long). Is this possible? The onboard modem is programmed to receive SMS coded texts.
Hi Edwin, Thanks a lot for your comment.
With our SMS console, the customer can send SMS commands to the device.
docs.emnify.com/portal/sms#open-the-sms-console
docs.emnify.com/apn-configuration/gps-trackers#sms-console-teltonika
In the example above, we send an SMS command “setparam 2001:em” to a device which triggers AT commands on the device to set the APN. Each device will have its own command set, of course.
Note: the default source is the name “emnify” but some devices can only respond to a numeric source, so if a response is expected, it is often better to use a short number like “12345” as the source.
Please, is there any way to read layer 3 messages
DEAR Sir I would like to know wether AT commands can be written in PIC assembly language via ASCII commands to help pic microcontroller communicate with simcom 300 2G/3G modem, thanks
Can you control laptop's internal BT device with AT commands?
isnt the article available anymore?
how can i command a zte mf100 modem ?