Wow! This is the fix I needed. We have some beautiful old fixtures on a claw foot tub that came with the house. I’ve rebuilt the hot water side at least 3 times over the last decade trying to quiet it down. Today tried a bevel washer and boom! Quiet tap. Amazing how long I’ve been looking and this seems to be the only vid mentioning this fix. Fantastic work! Thank you
Thank you so much. I fixed 2 annoying taps that 'pounded' when turned on. For months we tolerated them. Almost called a plumber in which could have costed us hundreds. But for less than $3 for 2 dome shaped washers we resolved the problems.
Hi, just wanted to say a massive thanks for the video, after trying many different things for months this cured our problem and was a 5 minute fix and very cheap. Fully appreciated thank you 👍
Oh my freak days. I'm so annoyed. I had this noise of water hammering for months from the bathroom sink. Was driving me crazy. Watched a couple of this geezers video and then came to this. Read one of the comments and it was staring me in the face....water pressure! So turn down main stop tap pressure and realised that pressure too much upstairs, adjusted the cold/hat stop taps on thr bathroom tap and BOOM problem solved. Thank you so much. I can't express how grateful I am to you.
seriously watched 8, maybe 10, seemingly promising vids that got me nuttin but older....until this one came along. Now my hammering days is in the past, where they truly belong. God bless you olde mate....cos the rest a these ytube commentary experts sure wont >..
Thanks very much for the tip. I have the washer vibrating problem on a washing machine conversion tap which has a water inlet tube in the centre of the washer rather than a standard removable valve and washer, so I removed the flat washer and replaced it with a conical washer intended for a flexible hose nut. So far, it is working and has stopped the hammering when the tap was partially opened. 😁😁😁
Thanks. My sink just started hammering like crazy while washing the dishes. So I’m going to get some dome washers from the hardware store and see what happens. Thanks a lot
Our garden tap makes a monumentally loud noise which resonates through the pipes in my upstairs bedroom. The noise is insane so I hope this works, we shall see. Not sure where to turn the water off but I will find out. Thx for the advice.
@@dereton33 Had a look. There are multiple vales attached to the water pipes and I have no clue which one is for the water faucet directly so I'm going to leave it for now and wait until the next time a plumber comes to the house to do a yearly inspection. I don't want to end up creating a 'Some Mothers Do 'Ave 'em' scenario hehe :D
dude i have this problem myself with one ceramic tap. The hammer noise happens because of the moving watter and sudden top will create a huge spike in pressure and putting at risk all the installation that has bad joints. My Tap is a monoblock dual mixer and it only happens when you shut the water off . With your one you cannot do it fast anyway but with a up and down motion you get that alot. What is the solution to that? I assume we need to install a expansion vessel to absorb the spike of pressure on that line. Is that a good solution?
Hi when I flush the toilet or run the shower there’s a noise and my kitchen tap shakes and runs even though it’s in the off position . Any ideas what the problem is ? Thanks
Great video thanks, I screwed a dome washer on the tap but there's not enough thread to put the nut on (as in the video). Do I need to put the nut on our will it be fine without it? Thank again
My dad had this problem but with his outside tap, it would start the hammer noise after turning it a couple of times, but if you keep turning it even when its hammering away it would stop, then when you turn it back off it would do the same, just seemed to be at a certain point, and if your inside the house it sounds like the whole house is vibrating! not sure if he ever got that fixed, might have to show him this video. cheers
Did your dad ever get that problem with the noise on his outside faucet fixed? I've got the same thing going on and wondered what worked for him. Thanks!
ThNks so much for this advice…. Hot bath tap has been driving me mad…. Toilet flushing… kitchen tap… upstairs washing machine (I’m in a marionette) everything sets it off!
Great video and a big help! I really need to have a go at our kitchen mixer tap. The bathroom cold water tap also sets this noise off in our house and you have to run downstairs and faff with the kitchen one till it stops 🙈 🤣, let's hope it's just the washer !
Haha exactly same as we but I get screeming toilet aswell that likea to keep me awake, i been meaning to have a look for a years or 2 now and change my tap but I'll change the washer
Thank you for the information. I have a single handle faucet. It is brand new and was just installed. It was not doing this before and the plumber doesn't want to take ownership and fix it. The stops were also changed out. Can you give me some suggestions? It looks like I am going to have to fix this myself.
+dereton33 I tried turning the pressure down. I thought it worked, but no. I am still getting the noise. I turned down both hot and cold water to no avail.
If there is a small ballafix valve on the pipe work or the fleixi connector to the tap, try turning that down, if you do not have one then consider fitting one yourself.
Thank you for a great video. I have a question here please. My house, the water pressure is ok when I open only 1 source of water(kitchen faucet, washroom faucet); however, the water pressure is very very low and almost no water upstairs if I open 2 sources of water(1 upstairs and 1 downstairs faucets or flush the toilet and open 1 faucet). Any idea of why this problem? Thank you!
Another tip learned from experience is that the nut holding tap washers in place often falls apart when you try to undo it, and then you'll often find there's then nothing to physically hold the washer in place. Using a socket or ring spanner instead of an adjustable to remove said nut makes this breakage less likely to happen.
Hello, can you help me out. We recently had a plumber replace the float valve on the tank in the attic as it was worn out and leaking. Since then I've noticed, particulary at night when it's quiet, that when you flush the toilet and the cistern is filling up, you can hear a vibration coming from what sounds like the tank in the attic. This morning I could hear the noise from the kitchen and when I touched the cold tap, which was off, I could feel it vibrating. When I turned it on slightly the noise and vibration stopped. Any idea where the problem lies ?, Thank you
Great video thank you! I live in a small block of flats and whenever some one uses shared mains, there is loud water hammer. Mine does the same and can hear the bang coming from the actual stop cock rather than tap. Building is for the 60's and likely still have original stopcock, so could a replacement washed in each stop the banging, or would new stopcocks be recommend? Is there anything else that could be the cause please? Water pressure is 3.5 bar, so unlikely this would be the cause would it?
That would definitely be it, water pressure is too high, see if you can get it down to about 2 bar. Try turning the main stopcock right off, then back on, just a half of turn.
Thank you for your reply. I like you thought it would be related to high pressure, but I had Thames Water out who took measurement and said 3.5 bar isn't so high. I could certainly adjust my stopcock, but getting all 5 other neighbours to do this might not be suitable as of course lower pressure will mean weaker showers.
I have this problem when running cold but it is from a single handle kitchen tap that controls both hot and cold. Planning on replacing ghe whole tap to upgrade the look lf the kitchen sink.
thank you Sir,... Please Help me, i have a query...i can't find hammering, i mean where exactly it is in the line, whether gate valve got eroded or all taps' washers are gone ? Guide me sir
If you get the hammering when you open a particular tap then just replace that tap washer. If you get it when you run a tap or flush the loo, then it is the roof tank ballcock.
One upstairs tap has water hammer so I wonder if this will help. I've got a problem with both old upstairs 1960s taps with a cross handle (like the one you're holding here, both HOT taps), in that they both gradually over time switch the water on themselves. After a few weeks they'll be dripping, after a few months there may be a small flow. What's happening? Is it the tap, or something to do with the condenser boiler?
@@dereton33 OK, Thanks. It's not happening on the cold taps, so do you think it suggests it's something to do with the hot water boiler? - we also have the Water Hammer on one of those taps.
@@dereton33 Thanks for your reply. I think your videos are excellent by the way! Apart from matching size, I'm guessing that it can potentially be swapped over to a standard gland so that I can fit the dome washer?
These rubber dome washers are not a long term solution. They wear out very quickly. Better solutions available, for home gamers, this includes anti hammer washers, in-line control valve, inline hammer arrestors. Recutting the valve seat and adding a new neoprene washer can fix sometimes the issue to. All parts readily available at big hardware stores.
I had Severn Trent out and they put a new stopcock outside number 19 which as the man said it between for 19 18 17 16 since they put the stopcock in my hot water tap in the kitchen vibrating I had a engineer out from Severn Trent and he said it my Valle and go for a new double tap low pressure one I got a combo boiler please please help.
I've been up all night trying to stop this horrible vibration coming from my hot water bath tap. My case is different because not only does the noise come when the tap is on and upon closing but it comes on randomly by itself which is scary and agitating. Can you please explain why it comes on by itself with the tap off? Thank you
If the tap is low pressure feed from a roof tank. then when the tap is used the valve in the loft has to fill to replace the water you have used. So just replace the ballcock in the tank and job sorted. If you are on a combi boiler then the tap washer wants replacing and the water pressure turned down. Some times just reducing the flow of pressure by turning down the main stopcock can fix it.
hi thats what i have never understood is that the one you have doesnt have a little nut on the end, mine does. I find also over tmie the washer actually gets so warped or unshaped thats it gets a bigger hole in the center which then allows the washer to slip off the tap stem thing. really taps and pain, i dont really understand why they are built like they are.
Hi, thank you for the video, I have the rattling problem just on the hot tap water after I changed to a new one. If I use dome washer, is it the same thing? Thank you again
Water pressure too high. Try reducing the flow by turning down the main stopcock, if that does not do it, then you will have to fit a pressure reducing valve on the incoming mains.
Wow! This is the fix I needed. We have some beautiful old fixtures on a claw foot tub that came with the house. I’ve rebuilt the hot water side at least 3 times over the last decade trying to quiet it down. Today tried a bevel washer and boom! Quiet tap. Amazing how long I’ve been looking and this seems to be the only vid mentioning this fix. Fantastic work! Thank you
You're welcome!
So easy - 15 seconds to fix an issue that has been a problem for 3 months. Thank you
No problem Rick.
Thank you so much. I fixed 2 annoying taps that 'pounded' when turned on. For months we tolerated them. Almost called a plumber in which could have costed us hundreds. But for less than $3 for 2 dome shaped washers we resolved the problems.
That`s great.
This is the first thing i could find that actually answered my questions. Great video. Awesome tip.
Awesome! Thank you!
Yet again a great video Al! Your advice on plumbing problems is priceless - Thanks!
1954BJohn Thanks John. Al.
Hi, just wanted to say a massive thanks for the video, after trying many different things for months this cured our problem and was a 5 minute fix and very cheap. Fully appreciated thank you 👍
Great to hear!
Oh my freak days. I'm so annoyed.
I had this noise of water hammering for months from the bathroom sink. Was driving me crazy. Watched a couple of this geezers video and then came to this.
Read one of the comments and it was staring me in the face....water pressure!
So turn down main stop tap pressure and realised that pressure too much upstairs, adjusted the cold/hat stop taps on thr bathroom tap and BOOM problem solved.
Thank you so much. I can't express how grateful I am to you.
No problem Azzam. Pleased you sorted it.
seriously watched 8, maybe 10, seemingly promising vids that got me nuttin but older....until this one came along. Now my hammering days is in the past, where they truly belong. God bless you olde mate....cos the rest a these ytube commentary experts sure wont >..
Thanks a lot Micka.
Thanks so much, 65 years old and just learned something new. Fixed the hammer!
Excellent!
Awesome, worked like a charm! The donation is on the way!!
Thanks Martin much appreciated.
Another very helpful video, Al! I like the panoramic picture on the wall, too!
Glad you liked it! Cheers Mark.
Thanks very much for the tip. I have the washer vibrating problem on a washing machine conversion tap which has a water inlet tube in the centre of the washer rather than a standard removable valve and washer, so I removed the flat washer and replaced it with a conical washer intended for a flexible hose nut. So far, it is working and has stopped the hammering when the tap was partially opened. 😁😁😁
Glad it helped John.
Thanks a lot mate, this helped me fix my hot water tap problem that caused that bloody water hammer banging sound
+Ozzy Doop . No problem.
Awesome video solve the problem, thanks a lot and that sweet smile is adorable.
My pleasure 😊
Thanks. My sink just started hammering like crazy while washing the dishes. So I’m going to get some dome washers from the hardware store and see what happens. Thanks a lot
Did the dome washer fix your knocking problem? If not, then how did you fix it? Thanks
This worked a treat for me. Thanks very much for the tip.
You're welcome!
Our garden tap makes a monumentally loud noise which resonates through the pipes in my upstairs bedroom. The noise is insane so I hope this works, we shall see. Not sure where to turn the water off but I will find out. Thx for the advice.
Good luck with it.
@@dereton33 Had a look. There are multiple vales attached to the water pipes and I have no clue which one is for the water faucet directly so I'm going to leave it for now and wait until the next time a plumber comes to the house to do a yearly inspection. I don't want to end up creating a 'Some Mothers Do 'Ave 'em' scenario hehe :D
Worked like a charm! for $2.50! Dome tap washer
Great.
dude i have this problem myself with one ceramic tap. The hammer noise happens because of the moving watter and sudden top will create a huge spike in pressure and putting at risk all the installation that has bad joints. My Tap is a monoblock dual mixer and it only happens when you shut the water off . With your one you cannot do it fast anyway but with a up and down motion you get that alot. What is the solution to that? I assume we need to install a expansion vessel to absorb the spike of pressure on that line. Is that a good solution?
Yes that is the best solution a pressure vessel fitted on the cold supply line to the tap.
Hi when I flush the toilet or run the shower there’s a noise and my kitchen tap shakes and runs even though it’s in the off position . Any ideas what the problem is ? Thanks
I have the same issue right now
Great video thanks, I screwed a dome washer on the tap but there's not enough thread to put the nut on (as in the video).
Do I need to put the nut on our will it be fine without it?
Thank again
Be fine without it.
My dad had this problem but with his outside tap, it would start the hammer noise after turning it a couple of times, but if you keep turning it even when its hammering away it would stop, then when you turn it back off it would do the same, just seemed to be at a certain point, and if your inside the house it sounds like the whole house is vibrating! not sure if he ever got that fixed, might have to show him this video.
cheers
jonnygti No problem. Al.
Did your dad ever get that problem with the noise on his outside faucet fixed? I've got the same thing going on and wondered what worked for him. Thanks!
Just replace the washer that will fix it.
ThNks so much for this advice…. Hot bath tap has been driving me mad…. Toilet flushing… kitchen tap… upstairs washing machine (I’m in a marionette) everything sets it off!
Glad it helped!
Great video and a big help! I really need to have a go at our kitchen mixer tap. The bathroom cold water tap also sets this noise off in our house and you have to run downstairs and faff with the kitchen one till it stops 🙈 🤣, let's hope it's just the washer !
Fingers crossed.
Haha exactly same as we but I get screeming toilet aswell that likea to keep me awake, i been meaning to have a look for a years or 2 now and change my tap but I'll change the washer
Thank you, I replaced the washer and fixed, Thank you Thank you!
Excellent!
Thank you for the information. I have a single handle faucet. It is brand new and was just installed. It was not doing this before and the plumber doesn't want to take ownership and fix it. The stops were also changed out. Can you give me some suggestions? It looks like I am going to have to fix this myself.
First thing, turn the pressure down at the stopcock.
+dereton33 I tried turning the pressure down. I thought it worked, but no. I am still getting the noise. I turned down both hot and cold water to no avail.
If there is a small ballafix valve on the pipe work or the fleixi connector to the tap, try turning that down, if you do not have one then consider fitting one yourself.
Thank you for a great video. I have a question here please. My house, the water pressure is ok when I open only 1 source of water(kitchen faucet, washroom faucet); however, the water pressure is very very low and almost no water upstairs if I open 2 sources of water(1 upstairs and 1 downstairs faucets or flush the toilet and open 1 faucet). Any idea of why this problem? Thank you!
Not enough mains pressure. Contact your local water authority to see if it can be increased.
Great video! Solved the problem! Thanks!👍
No problem.
Another tip learned from experience is that the nut holding tap washers in place often falls apart when you try to undo it, and then you'll often find there's then nothing to physically hold the washer in place. Using a socket or ring spanner instead of an adjustable to remove said nut makes this breakage less likely to happen.
+John Bull Thanks for the tip John. Al.
Thanks for this. I can't even begin to explain the annoying sound coming from my dishwashers tap at night when I run it 💀
You're welcome!
Hello, can you help me out. We recently had a plumber replace the float valve on the tank in the attic as it was worn out and leaking. Since then I've noticed, particulary at night when it's quiet, that when you flush the toilet and the cistern is filling up, you can hear a vibration coming from what sounds like the tank in the attic. This morning I could hear the noise from the kitchen and when I touched the cold tap, which was off, I could feel it vibrating. When I turned it on slightly the noise and vibration stopped. Any idea where the problem lies ?, Thank you
The water flow is too high, try turning down the flow rate at the main stopcock.
Great video thank you! I live in a small block of flats and whenever some one uses shared mains, there is loud water hammer. Mine does the same and can hear the bang coming from the actual stop cock rather than tap. Building is for the 60's and likely still have original stopcock, so could a replacement washed in each stop the banging, or would new stopcocks be recommend? Is there anything else that could be the cause please? Water pressure is 3.5 bar, so unlikely this would be the cause would it?
That would definitely be it, water pressure is too high, see if you can get it down to about 2 bar. Try turning the main stopcock right off, then back on, just a half of turn.
Thank you for your reply. I like you thought it would be related to high pressure, but I had Thames Water out who took measurement and said 3.5 bar isn't so high. I could certainly adjust my stopcock, but getting all 5 other neighbours to do this might not be suitable as of course lower pressure will mean weaker showers.
Yes the problem with flats.
How it’s made
Very experienced, thumb up mate!
Thanks a lot!
I have this problem when running cold but it is from a single handle kitchen tap that controls both hot and cold. Planning on replacing ghe whole tap to upgrade the look lf the kitchen sink.
Good luck Jason.
mine disappeared when i put a softer rubber washer in, didn't wear well though compared to the nylon. might try this.
Ok.
thank you Sir,... Please Help me, i have a query...i can't find hammering, i mean where exactly it is in the line, whether gate valve got eroded or all taps' washers are gone ? Guide me sir
If you get the hammering when you open a particular tap then just replace that tap washer. If you get it when you run a tap or flush the loo, then it is the roof tank ballcock.
@@dereton33 Hammering sound in flush system is due to air trapped in the line
Ball cock has nothing to do with hammering sound
One upstairs tap has water hammer so I wonder if this will help. I've got a problem with both old upstairs 1960s taps with a cross handle (like the one you're holding here, both HOT taps), in that they both gradually over time switch the water on themselves. After a few weeks they'll be dripping, after a few months there may be a small flow. What's happening? Is it the tap, or something to do with the condenser boiler?
A pressure problem.
@@dereton33 OK, Thanks. It's not happening on the cold taps, so do you think it suggests it's something to do with the hot water boiler? - we also have the Water Hammer on one of those taps.
Thanks, but how does this work on a quarter turn tap? Mechanism doesn't seem like it would fit?
It does not work on them.
@@dereton33 Thanks for your reply. I think your videos are excellent by the way! Apart from matching size, I'm guessing that it can potentially be swapped over to a standard gland so that I can fit the dome washer?
These rubber dome washers are not a long term solution. They wear out very quickly. Better solutions available, for home gamers, this includes anti hammer washers, in-line control valve, inline hammer arrestors. Recutting the valve seat and adding a new neoprene washer can fix sometimes the issue to. All parts readily available at big hardware stores.
They all cost a lot more than a 5 p tap washer.
What size should the dome washer be for a hot/cold mixer tap in kitchen sink? Thanks
half inch.
@@dereton33 thanks
I have a sink that has one handle that you turn to either side for hot or cold. What do I do for that?
Remove the handle and undo the body of the tap.
I had Severn Trent out and they put a new stopcock outside number 19 which as the man said it between for 19 18 17 16 since they put the stopcock in my hot water tap in the kitchen vibrating I had a engineer out from Severn Trent and he said it my Valle and go for a new double tap low pressure one I got a combo boiler please please help.
Just try turning the main stopcock flow down to a slower rate.
Love the shirt 😉👍🏻
shortyian Yes its so summer isn't it.Ha ha.
Turning a stop cock down reduces flow but does not reduce the pressure. You need a pressure relieve valve (PRV) to do that.
Thanks Derek. I’ll look into changing the washer. 👍
No problem.
Nice simple informative video.
No problem
I've been up all night trying to stop this horrible vibration coming from my hot water bath tap. My case is different because not only does the noise come when the tap is on and upon closing but it comes on randomly by itself which is scary and agitating. Can you please explain why it comes on by itself with the tap off? Thank you
If the tap is low pressure feed from a roof tank. then when the tap is used the valve in the loft has to fill to replace the water you have used. So just replace the ballcock in the tank and job sorted. If you are on a combi boiler then the tap washer wants replacing and the water pressure turned down. Some times just reducing the flow of pressure by turning down the main stopcock can fix it.
You are top man! Thank you.
No problem.
hi thats what i have never understood is that the one you have doesnt have a little nut on the end, mine does.
I find also over tmie the washer actually gets so warped or unshaped thats it gets a bigger hole in the center which then allows the washer to slip off the tap stem thing.
really taps and pain, i dont really understand why they are built like they are.
Nor do I.
My kitchen mixer has started doing this but it's a quarter turn ceramic.
Try turning the flow rate down.
Shout out for my childhood home, Bude, in the background
We love it there.
Hi, thank you for the video, I have the rattling problem just on the hot tap water after I changed to a new one. If I use dome washer, is it the same thing? Thank you again
Replace the roof tank ball clock.
Great video Thank you
Thank you.
You're welcome!
You are adorable - shirt, accent, hat. Gorgeous canvas too. Can you come fix my faucet please? Good day mate
Sure, why not, I will be on the next flight. Ha ha..
volume too low. Also can you show water hammer noise due to washer malfuction.. Are you sure it is bang bang noise.
Yes it is, but not always.
Toilet flush did hammering that to me sounded like the plumbing was trying to rip itself apart!
Replace the valve or the valve washer.
Thank you
No problem.
Blimey, it's Quint from Jaws!
Dont know him.
Thanks mate.
No problem Logan.
Damn dude is great with advice but he needs to cut his prehistoric witch lookin
Nails Lol 🧙🏻♀️ But all n all great tips
Thanks man
Damm I thought I had it nailed.
Thank you!!
Thanks!
I get 1 bang when I turn on either the kitchen taps or the bathroom sink or bath taps. What would that be?
Mad Flak Your water pressure is too high, turn down the main stopcock. Al.
dereton33 ok will give it a try thanks. I have hundreds of jobs here at my house if you want to come round and do videos for real :)
ER thanks but I will give it a miss.
top geezer!
No problem.
Thank you for being simple and effeminate... Your video helped the best . Thanks.
No problem.
You can create a major problem using dome washers.
Explain how after 45 years of use They now create a problem.
good info.... your nails are interesting though, DAMN!!!
Dont look at them look at the job being done.
His hands look like my dad's - mechanic and truck driver for years so I think they just look like years of hard work... and maybe a few smashes. 😊
Hugh Hefner???
He always talking about mixers
By the way I don’t have a roof tank .
Water pressure too high. Try reducing the flow by turning down the main stopcock, if that does not do it, then you will have to fit a pressure reducing valve on the incoming mains.
Geezer
Thanks
Dude... those finger nails!! Can i send you a nail clipper?
I like em that way.
I almost lost my breakfast because of your nails...
We all cant be perfect.
It appears that you have a bit of clubbing in your thumbs and fingers. This may be indicative of heart disease. Please have your heart checked out.
Thanks . I feel much better after that.