Nice little motor! You didn't show magnet polarities on the rotor or show what kind of material you made the stator core with. Other than those items, you did a great job.
the 3d printed motors are really cool but seems like the bell is not balanced. if you can achieve the balanced bell, then you'll get a higher RPM without helping it out
@@CoolStuff1 Is this good? lol it doesn't it looks like yours but doesn't look like it does what yours do haha 😅 also i'm rude i really liked your video, and your little motors once i figure this out i plan on trying to head to your link and trying what you did here
I have to ask, what good is it if it always needs a little finger boost. How would that work on an RC plane? Not being sarcastic just generally curious
The problem of the little push needed at the begining should be solved adding some weight to the rotor. This would work as a flywheel and give that inercia needed.
@@CoolStuff1 You are welcome!. you did good I'm looking forward to designing my own base on your design and make the high torque version do you have any suggestions?
The lack of field focusing causes this motor to have very weak torque which is why it has so high rpm. It would be very difficult to make it drive a practical size propeller.
Hi... Love to know what you guys think... Is it Cool 👍 or Not Cool 👎.
Also leave me a comment if you have any ideas or suggestions... Thanks
its very cool !
how do i get the 3d model
i cant find it anywhere
Stl??
Pls. Laked .stl file :D
Needs a capacitor in the starting switch.
Ehi, very good video. I loved the realization👍. Could you give us the 3d models to replicate it at home? Thank you very much.
Great Video! Is there any way for me to get my hands on the STL-fIle for the 3D Printed parts?
Try it with a resin printer. Just got one and the quality and precision is amazing.
Yeah quality and precsion dose look geat with resin printers. I have been considering getting one...
Nice little motor! You didn't show magnet polarities on the rotor or show what kind of material you made the stator core with. Other than those items, you did a great job.
Great works! Can u share design please? I want to test it either
Love the 3d printed motors. Lovely done thank you for the video
Thank you
@@CoolStuff1 Hello, does this motor have heating problems with the plastic when it works?
Why did you wind it like that? Can you explain why you didn't wind it in a delta?
very well made video and motors, perfect brushless outrunner! Could you do inrunner motor next?
The not gaining speed issue could be a balance issue, maybe if it's not stable it's preventing it from picking up speed
That's should be nice on my 3D printed drone!
This is my new favorite video
Hi boss. Great video. Do you have any stl please ? Thanks
Please make a drone with these motor🥺
do you make the files available anywhere? I would like to construct this as a project for my students
Could you release the stl files for these please?
Thanks for making another motor video
You're welcome mate and thank you for watching and commenting
Great Video! How many inches is the magnet??
if you made 12 coils vs 16 magnets,would it be better picking up the speed?
3:45 this drone misses metal casing, this will reduce the magnets strength a lot
the 3d printed motors are really cool but seems like the bell is not balanced. if you can achieve the balanced bell, then you'll get a higher RPM without helping it out
The not gaining speed issue could be a balance issue.
Its cool but make sustained RPM and after that on second run blow it up to see how far can go. You can print another one if need it.
Please make a video with this 3d printed motor vs real brushless moto or make a rc plane or rc boat with 3d printed motor
What would happen if you hooked it up to a powerful battery meant for drones?
Hey man, this looks great and I’d love to make one myself. Where can I find the stl?
Im trying to make a replica of the model if you need it just tell me
@@zerenzi hey, how did you go? Im thinking of making some of these 😁
@@frissonsknives Im still working on it. I will notify you when its done!
@@zerenzi i will be making a 2306 soon, would it be fine to message you if I have any questions? I promise I won't spam
@@frissonsknives sure but im not an expert
Nice work can you please share the STL file .
That's really cool stuff ;-)
Thank you
yp
pleax teste this on 3d print drone!
Cool
Thank you mate
What bear and magnet you used for?
looks like need right advance set up in esc settings
What are you using to with the nob to speed it up?
To control the motors speed I'm using a Servo Tester
@@CoolStuff1 Thank you SO much, i want to try what you're doing lol but i have no clue what I'm doing or where to start 😟
@@CoolStuff1 Is this good? lol it doesn't it looks like yours but doesn't look like it does what yours do haha 😅 also i'm rude
i really liked your video, and your little motors once i figure this out i plan on trying to head to your link and trying what you did here
Can you share the step file or technical drawing of the parts?
Please, give me the link of the device with which you let operate the motor
Sure mate... ESC - uk.banggood.com/custlink/3GGyARzBPO
Servo Tester - uk.banggood.com/custlink/DvDhsRM4tg
I have to ask, what good is it if it always needs a little finger boost. How would that work on an RC plane? Not being sarcastic just generally curious
Yes unfortunately it needs bit of foreplay like a woman... 😅
When it has speed it can speed up
Can you make a drone using these motor
Если б пез пенделя было бы ещё лутьше, автор ты Молодец.
Как я понял, это из-за того что датчиков холла нет и контроллер не понимает когда переключать обмотки и просто создаёт вращающееся магнитное поле
The problem of the little push needed at the begining should be solved adding some weight to the rotor. This would work as a flywheel and give that inercia needed.
Maybe modified the design for outer rotor bigger and use thicker magnet
That thick rotor and magnet add weight. Maybe that work
trash motor
Hi, What is the filament material you are using? Thank you in advance.
PLA
@@CoolStuff1 Very impressive.
@@robodev6033 Thanks
@@CoolStuff1 You are welcome!. you did good I'm looking forward to designing my own base on your design and make the high torque version do you have any suggestions?
Make a diy drone using this motor
The lack of field focusing causes this motor to have very weak torque which is why it has so high rpm.
It would be very difficult to make it drive a practical size propeller.
It would be good for a small drone
Drone banega vai??❤❤
How much this magnets
If you can reach 100,000 rpm then yes, you are faster than any brushless motor created.
will you pl. send stl files
Is thi delta connection 🥺
No it's wye (y) connection
My goodnes that was fst!
48 minutes ago
Your so amazing wow
Thank You 😊
5:25 why need help?
3d printed
Hook these up to real batteries and so they spin faster
Можно Ваши гематомы взять
I'll subscribe you
Thank you
LOL im the First
Yes you are and thank you for watching.
Мне намда 4 мотора серый чёрный жёлтый и синий можн
Reduce no. Of turns to 9 and increase wire guage... For higher speed.! Calculate before you make a video...! 🤦🏻I'm sure ur not an engineer.!
Calm down.
And what would the calculations be ?
Your printer need to fix. Parts is bad
How so
@@CoolStuff1 Some people are just haters. They need to fix their grammar! You gotta consider the education level of people like this. 🤣