Thanks for the video Angel. I have the same car and replaced the regulator this past weekend after it failed. I watched the video first and realized I would need to get the female torx tools first, that helped not being stuck half way through the project!
I swear Angel you can do MORE with one hand than most people can can with both their hands, I really like how you are so dedicated to show the connectors and such
Thx so much for your time to explain. It worked effortlessly (I had to do 17 sec. vs. 15 sec because it would go all the way down but only up half way. I did 17 sec., and it worked! Thx soooo much! 2005 745li
"Lock in place so panel won't Paul" Da wife didn't catch that frase until I did it with a phillipino accent... Mis your video s Bigg Cuzzin good to have u back. ALOHA from Southside LV... RIP SR. 🤙🏼🤙🏼🤙🏼
hello angel, my wonderful brother. if you knew how glad I am that you are back, as soon as I saw the video I jumped for joy. you are amazing and I am happy for you. God bless you. George from Corinth Greece.😂😂😂❤❤
Hello Angel. Good job. I'm Vietnamese. Thanks for sharing the video. Hopefully maybe you will come out with a video about the diagnosis of the oscilloscope.
No offense bro but those cars a such a pain in rear!! All plastic and everything is so difficult/challenging...you have an incredible aptitude for this business bro...blessings P.S. for all the crap you pulled off that window you just replaced a clutch on a EG 1994 Honda Civic Si....😅 God Bless Your papa bro!!! Im sorry for your loss ❤
I did a DIY replacement on similar system on 2011 Mercedes Benz E550 back in 2018. It was worse than the BMW. Instead of plastic turn fasteners, they were rivets, I had to drill out almost 10 rivets... and riveted all of them back after replacing regulator cable and motor.
I have just 2 questions. What causes the power window regulators to wear out? Is there any loose bolts/screws to be tightened so that it needs no replacing?
Thank you for the video. I have two questions, (1)Will I have to re-program or register the battery once I disconnect the negative cable (2) Do I have to worry about the air-bag deploying?
hi lodz, pwede ka bang bisitahin sa inyo? gusto ko sana mgpa picture jan sa place mo and if i'm super lucky, magpapa picture na din ako sa inyo. kakarating lng namin para sa darating na concert ni TS :)
Hope that Dorman regulator motor unit holds up. I've had 3 break on my son's car. They last for a while then break. Finally got an OEM one from Toyota.
Hugh, did the Dorman ones carry a lifetime warranty? That's the only other reason why I go that route... Sure, labor and down time, but I can't afford to pay for OEM parts (I stick with OEM on sensors and spark plugs for sure)
@@ricebike Yes they do have a lifetime warranty but it's a pain to keep replacing the same part over and over. I do always go toyota OEM on plugs, O2 sensors etc but haven't had much luck with aftermarket parts.
@@FixItAngel that's great! BMW's can be rough to work on. Gone are the days of simple German cars like my first 72 super beetle. Rebuilt the motor on my mom's back patio on an old coffee table😄
@@hughkoontz2166 son had a Mazda 3. OEM rear shock mounts casted in cheap chinesium aluminum & will break if one drives over bumpy roads or potholes. Dorman was the only manufacturer that made it out of steel with a lifetime warranty. That's one of the reasons I use something like that. And yes, OEM for sensors or anything electronic unless proven that it's reliable
@@FixItAngelI have just 2 questions. What causes the 😂🎉🎉😢power window regulators to wear out? Is there any loose bolts/screws to be tightened so that it needs no replacing?
a vehicle over 15 years old. but very well maintained, congratulations to the owner. Good week everyone and stay with God
God Bless you Bruno
Thanks for the video Angel. I have the same car and replaced the regulator this past weekend after it failed. I watched the video first and realized I would need to get the female torx tools first, that helped not being stuck half way through the project!
I don't own a BMW, but I continued watching just to take a look at the door interior to get an idea about how to soundproof my Camry doors.
thank you for watching
Join some owner car forums for the vehicle you own... That way they share common information on what others have done
Had me cracking up with your stomach talking then crying with the video of Dad. I miss him so much 😭
I swear Angel you can do MORE with one hand than most people can can with both their hands, I really like how you are so dedicated to show the connectors and such
Hi David, I feel more comfortable using one hand instead of two. LOL your welcome on the connectors. im happy you appreciate it.
You never forget a father, I lost him when I was only 15 years old, today at 68 years old I still have him present 😪😪😪
It's Great to have you back!!!!
thank you brother!!
Thx so much for your time to explain. It worked effortlessly (I had to do 17 sec. vs. 15 sec because it would go all the way down but only up half way. I did 17 sec., and it worked! Thx soooo much! 2005 745li
Bardzo dobra robota. Mam taki sam model BMW. Pozdrawiam z Polski 🇵🇱
Glad to see you back brother, great video. God bless your dad. Amen 🙏
thank you Danny. God Bless you
Welcome back Che’lu. Condolences for your dad. 🙏🏽
bonjour de la FRANCE
vraiment du travail de professionnel
un plaisir à vous regardez
il faut beaucoup de patience et comprendre le système
bon courage
Good to see you back angel
thank you Juan
I'm sorry for the loss of your dad. I loss my dad to small cell lung cancer too. Aloha from Hawaii!
sorry you lost your dad too from lung cancer. nice to have support from Hawaii. Mahaloz brahdah
"Lock in place so panel won't Paul" Da wife didn't catch that frase until I did it with a phillipino accent... Mis your video s Bigg Cuzzin good to have u back. ALOHA from Southside LV... RIP SR. 🤙🏼🤙🏼🤙🏼
LOL You caught that huh?!! tell your wife I said mabuhay. Mahaloz for watching Cuzz. Good to know you local in LV. stay safe
hello angel, my wonderful brother. if you knew how glad I am that you are back, as soon as I saw the video I jumped for joy. you are amazing and I am happy for you. God bless you. George from Corinth Greece.😂😂😂❤❤
Thank you my brother George!! I'm happy i still have a fan in Corinth Greece. Take care
Glad you back . Hope all is well with your family. My condolences to your pops. Much paz y salud
Hello Angel. Good job. I'm Vietnamese. Thanks for sharing the video. Hopefully maybe you will come out with a video about the diagnosis of the oscilloscope.
welcome brother
So sorry for your father . All the best for you and your family. Greatings from Romania!!!
thank you Mihai for the sympathy. Nice to have a fan from Romania. God Bless
sorry for your loss angel
thank you David
No offense bro but those cars a such a pain in rear!! All plastic and everything is so difficult/challenging...you have an incredible aptitude for this business bro...blessings
P.S. for all the crap you pulled off that window you just replaced a clutch on a EG 1994 Honda Civic Si....😅
God Bless Your papa bro!!! Im sorry for your loss ❤
no worries brother. lol Thank you for sincere sympathy. god bless you bro
You are a wonderful person and I love watching your videos and learning a lot from them. Thank you very, very, very much❤❤❤❤
It’s been a while. Welcome back! May your dad rest in peace
thank you Jerry
Im sorry for youre loss , good to se you back at it again and fixing cars and doing good videos.❤❤
thank you brother
Happy see you back bro..
I'm happy you had the time to comment and watch my video. thank you
Great video! Glad to have you back!!! 🙏🏾🙏🏾🙏🏾
thank you brother
the king has returned.
thank you for watching Nihat
Great video I love the humor you add
thank you brother again for watching.
Welcome back, I’m also pooping and watching this as we speak 😎
Same!
thank you LOL
Glad to see you again❤❤❤Fix It Angel🤙🤙🤙❤❤❤
So sorry about your dad. This video explains why BMW’s cost so much. The over engineering in this door is unbelievable.
thank you Kenneth. i think mechanical engineers just add more parts to to make it cost more. lol
And lack of serviceability.
My condolences brother. As always, amazing work and also keep your head up! God bless you and you family 🙏🏿🙏🏿💯🔥
thank you brother
Я аж сам за переживал за вас. Думал ну блин BMW работай)))
Привет, брат, я все еще здесь, и у меня все хорошо. я был на Гуаме. майский папа болел раком легких и умер в декабре
He's back!!
Great job young man!!
God bless your Dad and your family. 🙏
thank you Anthony, god bless you
Good job Angel!!! Missed your video's!! I'm mad at your weather out there( Phoenix)? I'm in Indiana between Michigan and Chicago ❄️❄️❄️
Hi Randy, that video was made in September 2022. Vegas now is still cold!! You keep warm brother. I would like to visit Indiana when it's warm.
@@FixItAngel good to know
One of the million reasons why I love my toyota 👍
true Roger!!
It's been a long time, glade to see u. From S. Korea
yes it's been a long time. thank you for watching. My wife loves BTS and Black Pink
My condolences Fam Had me shook right there thought you wasn’t gonna come thru THATS A JOB WELL DONE BMWS are a nightmare SMFH
thank you Deezo
I did a DIY replacement on similar system on 2011 Mercedes Benz E550 back in 2018. It was worse than the BMW. Instead of plastic turn fasteners, they were rivets, I had to drill out almost 10 rivets... and riveted all of them back after replacing regulator cable and motor.
ohh man that's a pain in the butt to drill off the rivets. thanks for the experience you had.
It is been a while. Glad to see your video.
yes Kenechukwu, I was in Guam for my dad.
I will never bitch about my Honda window regulator replacement again. Nice job!
Hi welcome back nice to see you
thank you srinivasan
Nice to see you again my friend.
thank you Tony
Good work as usual, thanks because i réparé many things alone, but not all of course, so thanks you and i m waiting thé next vidéo.
thank you Amor
Bueno video, saludo de Francia.
thank you brother
Its been long time , glade to see u
hi sinan, thanks for watching. glad to be back
That job look really hard great Job brother thank you for sharing your time with your father 🙏
thank you Gio
I have just 2 questions.
What causes the power window regulators to wear out?
Is there any loose bolts/screws to be tightened so that it needs no replacing?
Presente en las aventuras de mecánica automotriz de Ángel, desde Navoyork Sonora México Like
thank you Jose for watching
Thank you for the video. I have two questions, (1)Will I have to re-program or register the battery once I disconnect the negative cable (2) Do I have to worry about the air-bag deploying?
You're back!!
yes sir!!
Do more videos on this exact car please. I got the same care just different color
i will try Sidney. thanks for watching
All the best 👍
thank you Dale
Welcome back
thank you brother
always stay strong kababayan i like your vids since i subscribe keep it up
Thank you so much!
Great to watch a video from you!
thank you brother
Hey. It's been a long time 👍🤙
thank you for watching Larry
Nice one angel 🤙
thank you brother
Yeesss! Finally another video. 🎉
Hope you enjoyed it!
Amen rest N peace brotha
It finally came out on UA-cam. I was wondering if you were retiring
just been taking care of my dad in guam till he passed away in december 2022
welcome back lodz!!!
thank you for watching
hi lodz, pwede ka bang bisitahin sa inyo? gusto ko sana mgpa picture jan sa place mo and if i'm super lucky, magpapa picture na din ako sa inyo. kakarating lng namin para sa darating na concert ni TS :)
Hope that Dorman regulator motor unit holds up. I've had 3 break on my son's car. They last for a while then break. Finally got an OEM one from Toyota.
my friend said it's still working good
Hugh, did the Dorman ones carry a lifetime warranty? That's the only other reason why I go that route... Sure, labor and down time, but I can't afford to pay for OEM parts (I stick with OEM on sensors and spark plugs for sure)
@@ricebike Yes they do have a lifetime warranty but it's a pain to keep replacing the same part over and over. I do always go toyota OEM on plugs, O2 sensors etc but haven't had much luck with aftermarket parts.
@@FixItAngel that's great! BMW's can be rough to work on. Gone are the days of simple German cars like my first 72 super beetle. Rebuilt the motor on my mom's back patio on an old coffee table😄
@@hughkoontz2166 son had a Mazda 3. OEM rear shock mounts casted in cheap chinesium aluminum & will break if one drives over bumpy roads or potholes.
Dorman was the only manufacturer that made it out of steel with a lifetime warranty.
That's one of the reasons I use something like that.
And yes, OEM for sensors or anything electronic unless proven that it's reliable
Good Job brother too much to take it out hahaha but you did well
Saludos desde Chile 🇨🇱 🤙🏻
thank you Gonza
Well done, very good job.
thank you oras
I just wanna ask if you charge for Diagnostic and consultation??
Thank you and More power . I will appreciate the reply .
I own a 92 I been wanting to work on it I mis it as my daily driver
LMFAO Angel busts ass at 2:08! 😂😂
LOL
And that’s folks why I don’t own a BMW.. You will pay later..
true true Poohbear. thanks for watching
Good job ❤
Thank you very much!
Bmw are a joke not interested on buying one but a great video to watch keep up the good work
thank you for watching
Hi idol ....job well done...
thank you Edel
Que tal Ángel buen video
thank you Daniel
Very good
thank you
Were are you we miss you man 😅
hi hasan, i was in Guam taking care of my dad. he passed away in December 2022
good job
Thanks
It's been a long time.
yes it has been brother
@@FixItAngelI have just 2 questions.
What causes the 😂🎉🎉😢power window regulators to wear out?
Is there any loose bolts/screws to be tightened so that it needs no replacing?
Sympathies to you and your family Mate.....
thank you Anton. god bless you
Nice I have a 1989 3 series you inspired me to work on.
that's awesome Thomas. Thank you for watching
So much work for a BMW.
المشكلة أنه بعض الأحيان النافذة بعد إصلاحها لاتعمل ، بسبب شي في البرمجة وبعد عدة أيام تجدها تعمل بشكل جيد
Im sorry your loss
thank you Leonardo
Where are you , long time no see , make more videos friend
Hi Saied, i was in Guam for a couple months
@@FixItAngel welcome back waiting for your videos and experience
mgkatulad sila ng tatay ko, nag aatip prin khit matanda na at masakit na ang likod! hala bira parin!😅 condolence at sumanawa ang kanilang kaluluwa..
true thank you
ooh yeah!
thanks for watching
To dealers the labor cost about 1500 US.
What??!! Really? I should have charged my friend half of that. LOL
May your Dad rest in peace bro.
thank you Sonic Miranda
Kids are big Angel
Yes they are AJ. thanks for watching
Don’t need to disconnect the cable
why? i could put it back
👌👌👌🤙
❤
thank you Ayad
May your dad rest in peace?
Full sending never lifting 😏 🤙 mobbin deep knowledge is power did you eat kare kare that made you take a dump haha 🤣
lol
🎉
thank you
hola amigo
hello amigo
👏👏👏👏👏👍👍👍
bruh CABULL 🤣🤣🤣