X-POLE XPERT Pro (2018 Onwards)
Вставка
- Опубліковано 19 вер 2019
- The XPERT PRO static/spinning pole is our most advanced pole yet. Taking all the strengths of the XPERT, it’s similarly available for use in both spinning and fixed pole modes. What sets the XPERT PRO apart is our X-LOCK mechanism.
The X-LOCK is a simple mechanism located toward the base that, when independently rotated, will move the XPERT PRO from a fixed, static position into a spinning mode. The X-LOCK makes switching back and forth between modes faster and more convenient than ever before. This pole works in both fixed and spinning modes. As a result, it serves both beginners and more advanced polers. Assembling this pole requires no screws, bolts, or drilling. You can also quickly disassemble it for storage purposes. Learn more about the XPERT PRO static and spinning pole today-contact us if you have any questions. - Розваги
I was in the midst of expanding the height when the red line showed up at the bottom, I was about to get so angry that I had to buy an extension when the website's calculator told me I wouldn't need one. I turned around and nudged the box, causing the last piece to roll out from under some cardboard! it's perfect, I love it. make sure you check the box thoroughly!!!
Just got this pole in times of social distancing. It is my first pole. I have a chrome one at 45 mm because it is the same as my studio. Thinking back, if I have a silicone coated or powder coated one, it would save dryhand for practice at home. It is super heavy but easy to install though it takes me like an hour or more to assemble them on my own when I first received it. It is easy to adjust the height. It comes with one extension which will fit ceiling from 7 feet (without extension) to 9 feet, and more extension can be added for higher ceilings. It comes with 3 hex keys, but unlike the NX pole which does not have the spin switch and has a bigger dome, it doesn’t come with a carry bag. Hope this is useful for those who are thinking about getting an xpole :)
Hi! Do you know if the X-pole xpert pro pole is apartment friendly? I have an apartment and don't want to drill into the ceiling.
I am living in an apartment and I do not get the one that needs drilling. I got the one with the upper dome. However my ceiling is concrete, not wooden or hallow. It is rather safe so far. There are times I didn’t fix the pole tightly enough and it slide to the side a bit but it never falls. Then I fix it and make sure it straightly aligns and it is fine.
@@azkcm you need to tighten your pole everyday
@@alyssa5648 yes, thank you for then suggestion
Very useful, clear instructions. I just installed my pole and had no issues with it.
Setting it up is no joke when the x joints get stuck… i was lucky that i didnt have crazy motivation to get it up that i tried over several months until it finally decided to unstuck itself 😭
Awesome instructions and kit. I did the whole install comfortably by myself with a ladder. BUY A MAGNETIC LEVEL AND A DECENT STUD-FINDER for your own sanity though.
It can be done by 1 person?
@@tijanameduric Yes it can. Just have a chair or stepladder so you can reach your ceiling
@@sallyberetta4235 is it normal that the base tilt to the side if its set up with the A-Pole? i got mine already half build up. its in spinning mode.Only A+B-Pol are disconected. But the Base+ A-Pol are connected. Normally if you put it up it is straight? Mine tilts to the side.Is something wrong/broken 😲?
Ok can you add removal??? It’s incredibly hard to do and the instruction manual is super confusing to me…. None of the videos I’ve found show removal and it’s really annoying…
I just put the pole on static, unscrewed the 3 screws at the bottom and then started twisting the pole till it came loose, gentle brought it down as to not let the dome drop to the floor :) after that just take the dome and top piece off, unscrew the xjoints and finished :)
Hi. What is the difference between double-lined and regular Xpert pole/extension? I have a 750 mm extension and it seems heavier than a 500 mm extension and it looks ticker inside the pole. I also have 125mm, 250mm, and 500mm extensions and non of those look tick inside. Is it possible that my 750 extension is dual-lined, and can I use that one on top of a regular Xpert pole (A+B)? Is it safe to have a dual-lined extension on top of the Xpert pro home pole (A+B)?
Is anyone having issues with a gap between the dome and the pole?
VERY LIKE AND SIMPLE, VIDEO.
Hey, I want to order the xpert pole (UK) ASAP however have seen various reviews about inaccurate size recommendations on the website- and customers having to order extra bits etc which I’m worried about...
I can't find the arrow...ive looked on all my extensions and its not there
i’m having issues with the pole either being too short or too long and cannot mount it to the ceiling- how to sort this out?
He made that look super easy I always get confused when I have to take it down. You have to put it on static before you start loosening the three screws above right?, and then start turning it counterclockwise right?
what if its not beeing turned into static?Mine is handed m out in spinning, while A - and B-Pole are disconnected!
I can’t get the adjuster to expand like the video. I can tighten it when I twist it to adjust to my ceiling though. Also I can’t spin the pole freely to go into spin mode. I might have to take it down & do it over again.
Hi did you ever figure it out?
The ceiling I wan't to install it under has a beam running through it. Does the entirety of the upper dome need to be flush with beam? As it is about a third of the total surface area of the upper dome would not be in contact with the beam. Is it still possible to install here?
Can you please give us a call?
My A-pole is STUCK to the B-pole and I can’t get it off😧 the expanded x-joint inside wont let go. What should I do? Several strong ppl have tried to unscrew but it’s stuck !!
I’m panicking here
My pole kinda came put together …. And it won’t adjust for it touch the ceiling
My xpole came with parts already put together, how do I remove the top insert?
Mine just pulls out
I’m trying to add a 100mm extension but when I put that onto the joint it’s the same length and I can’t attach anything into it! I’ve got the extension from X-Pole so am assuming I’m just being thick here but be great if anyone had any ideas !?
Please email our technical team - sales@xpoleus.com - they can help work this out for you!
My xpole will get stuck on static and won’t let me change it to spin
My x lock seems to be stuck in static. Any help?
It’s very difficult doing alone .
Ugh i need help taking it down..
Me too!
Mine is either too tall or too short I’m so frustrated I can’t get it up
Did you manage to sort it?
Yes
How did you sort it out? I have the same issue lmao
@@Casey97531 same ahh I was sad to see there was no reply to your comment 😭 Did you figure it out?😂🙏🏻
@@DevonAsh yeah I found a spot I could fit it
I had to take an extension off though
It makes more sense to install the pole between two ceiling joist to level out the pressure.
Your customer service is unreliable I contacted them they by email yes they email me back but I contacted the office 2 times and no one answer all I’m trying to do is adjust the height of the pole to my ceiling
Which model do you have and which part are you stuck on? Loosing the extender bar screws? Extending the pole? Tightening it back up?
animefan1606 thanks I finally figured it out o just had to add the b pole
@@sfadare301 Oh good! I'm glad you figured it out!
@@bayonettafan1606 is it normal that the base tilt to the side if its set up with the A-Pole? i got mine already half build up. its in spinning mode.Only A+B-Pole are disconected. But the Base+ A-Pole are connected. Normally if you put it up it is straight? Mine tilts to the side.Is something wrong/broken 😲 ?
Slippery pole i do not recommend
Tae Rich you have to break it in
Apple Smith i had it for 2 years no thanks.
You realise poles do get slippery, right? That's why there's such a market for grip e.g. dry hands. It helps to clean with metho :)
Crimson duhhh i got em all
xBrownGirLinTheRingx what’s the best finish to have for the at home pole?
What is xpole email address ? They still haven’t shipped my pole it’s been over 10 business days . Where is my pole ?!
If you ever need to reach us, please email us at sales@xpoleus.com - hope your pole has reached you now.